Commit Graph

91 Commits

Author SHA1 Message Date
Christopher Tse ddb53c9458 docs/esp8266/quickref: Add warning block about NeoPixel timing. 2021-01-30 14:36:30 +11:00
Damien George 98182a97c5 docs: Update I2C and SPI docs to add reference to SoftI2C and SoftSPI.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Nick Crabtree 2934e41df0 docs/esp8266: Add quickref documentation for UART on esp8266.
This patch adds quickref documentation for the change in commit
afd0701bf7.  This commit added the ability to
disable the REPL and hence use UART0 for serial communication on the
esp8266, but was not previously documented anywhere.

The text is largely taken from the commit message, with generic information
on using the UART duplicated from the Wipy quickref document.
2020-06-10 22:46:09 +10:00
Jesse Andrews c4ea4c1810 docs/esp8266: In TCP tutorial, add HTTP response code and content-type.
Show how to send an HTTP response code and content-type.  Without the
response code Safari/iOS will fail.  Without the content-type Lynx/Links
will fail.
2020-02-03 23:50:09 +11:00
ketograph 04e7aa0563 docs/esp8266/quickref: Add note that machine.RTC is not fully supported.
See issues #3220 and #3710.
2019-12-17 12:19:27 +11:00
Damien George 90c524c114 docs: Remove spaces on lines that are empty. 2019-12-04 15:02:54 +11:00
Mike Causer a2c4cb484d docs: Fix spelling in various parts of the docs. 2019-10-16 14:08:28 +11:00
Mike Causer 5a8f392f09 docs/esp8266: Add ntptime usage to esp8266 quickref. 2019-10-16 14:08:13 +11:00
Thiago Paes 5463ab6df6 docs/esp8266/tutorial: Make http_get sample function self contained. 2019-10-16 13:52:04 +11:00
Mike Causer 6323cbda4f docs/esp8266: Add tutorial for APA102 LEDs. 2019-05-07 11:45:10 +10:00
Damien George b3e013f60e docs: Unify all the ports into one set of documentation.
With this commit there is now only one entry point into the whole
documentation, which describes the general MicroPython language, and then
from there there are links to information about specific platforms/ports.

This commit doesn't change content (almost, it does fix a few internal
links), it just reorganises things.
2018-10-01 13:53:53 +10:00
jcea 5731e535dd docs/esp8266: Fix minor typo in "certificates". 2018-06-25 17:36:28 +10:00
Olivier Ortigues 298b325f3e docs/esp8266: Add a note concerning GPIO16 pull capabilities. 2018-02-15 11:15:12 +11:00
Olivier Ortigues d072573226 docs/esp8266: Update PWM doc regarding clipping of min/max values. 2018-02-15 11:14:34 +11:00
Ryan Finnie 1e2b78111b docs/esp8266/tutorial: Fix typo, change -> changed. 2017-12-13 17:30:02 +11:00
Paul Sokolovsky 1742ab2653 docs/esp8266/general: Minor grammar fixes. 2017-11-02 00:38:58 +02:00
Paul Sokolovsky 58c785632f docs/esp8266/general: TLS limitations: Mention also "ussl" module limitations. 2017-11-01 08:59:42 +02:00
Paul Sokolovsky 4dd523adbb docs/esp8266/general: Add section on TLS limitations. 2017-10-30 19:50:57 +02:00
Mike Causer f599a38059 docs/esp8266/quickref: Add quickref info for RTC class. 2017-10-10 15:22:23 +11:00
Gabe 9e0cdb22f1 docs/esp8266/tutorial: Update neopixel with example of using 4 bbp. 2017-10-04 10:35:22 +11:00
Matthew Brener d003daee06 docs/esp8266/tutorial: Fix typo, "its" to "it's" in powerctrl.rst. 2017-07-24 10:33:03 +10:00
Paul Sokolovsky 205c368fa1 eps8266/general: Fix typo in recent example. 2017-07-21 12:08:18 +03:00
Peter Hinch 6ede921731 eps8266/general: Add known issue of WiFi RX buffers overflow. 2017-07-21 10:19:17 +03:00
Patrick O'Leary 45b127e7ac docs/esp8266/general.rst: Fix name of NTP module.
The simple NTP client module is named "ntptime.py".
2017-07-02 20:02:19 -05:00
Damien George 0a54b6dce9 docs/esp8266/tutorial/intro: Fix some grammatical typos. 2017-06-26 15:12:48 +10:00
Paul Sokolovsky beb94b6efc docs/esp8266/tutorial/intro: Sphinx requires blank lines around literal blocks.
At least, Sphinx 1.3.6.
2017-06-23 22:04:33 +03:00
Paul Sokolovsky 51668dffaa docs/esp8266/tutorial/intro: Discourage use of 512kb firmwares.
This follows similar warnings in other parts of docs.
2017-06-23 22:00:40 +03:00
Paul Sokolovsky 22ca5390f7 docs/esp8266/quickref: Polish Pin.on()/off() examples. 2017-06-02 21:08:23 +03:00
Paul Sokolovsky 272a5d95e0 docs/esp8266: Consistently replace Pin.high/low methods with .on/off. 2017-05-30 07:36:25 +03:00
Damien George daa5ba5629 docs/esp8266/quickref: Add links from quickref page to machine classes. 2017-04-18 15:28:18 +10:00
Paul Sokolovsky a1c39ffb69 docs/esp8266/tutorial/intro: Reword section on flash size requirement.
Give a clearly dissuading tone on end users trying 512KB version
- it has to many end-usery features lacking.
2017-04-14 01:12:04 +03:00
Paul Sokolovsky e5278b98fe docs/esp8266/general: Start explicit "Known Issues", mentioned RTC inaccuracy. 2017-04-07 10:52:50 +03:00
James Ouyang e73a0b944f docs/esp8266/tutorial: Update since esptool 1.3 added Python 3 support.
esptool 1.3 now supports both Python 2.7 and 3.4+.
Updated github link to now-official espressif repo.
2017-03-07 18:23:24 +11:00
Damien George 3217bbe491 docs/esp8266/tutorial: Specify the baudrate in picocom example command. 2017-02-07 16:58:43 +11:00
Paul Sokolovsky 52c19875a4 esp8266/general: Add "Scarcity of runtime resources" section.
With warnings of need to close files, sockets, etc.
2017-01-04 10:33:48 +03:00
Max e1f495a4bd docs/esp8266/tutorial: Close socket after reading page content. 2017-01-04 11:15:02 +11:00
Andrew Mulholland 71ff0b549d docs/esp8266/tutorial: Update intro to add Getting the firmware section.
Add a "Getting the firmware" section to better describe how to get hold of
the MicroPython firmware, especially if you have a 512kb module.
2016-12-30 14:27:02 +11:00
Paul Sokolovsky 5630778f0f esp8266: Update docs for esptool 1.2.1/SDK 2.0 (--flash_size=detect). 2016-11-08 04:52:07 +03:00
puuu 933198c55f docs/*/quickref.rst: Use new semantics of ticks_diff() 2016-11-08 02:01:05 +03:00
Paul Sokolovsky 5c3d75c937 docs/esp8266: Update for new WebREPL setup procedure. 2016-11-06 10:02:33 +03:00
Paul Sokolovsky b4df3e74e1 docs/esp8266/quickref: Further improvements for SPI subsections.
Consistency and formatting.
2016-09-04 23:31:05 +03:00
Paul Sokolovsky 20da9064d7 docs/esp8266/quickref: Update information on SPI classes.
SPI(1) is not used for hardware SPI. Few more details are provided.
2016-09-04 21:13:55 +03:00
Damien George 76dcaddc0f docs/esp8266/quickref: Add internal links to docs for some modules. 2016-08-29 17:40:36 +10:00
Damien George 13c5a228c9 docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver. 2016-08-29 12:52:50 +10:00
Radomir Dopieralski ed0a06a93f docs/esp8266/quickref: Fix and update the SPI docs
Use the `SPI` factory function in the examples, and use
proper baud rate of 80 000 000.
2016-08-28 23:14:45 +10:00
Radomir Dopieralski 8e7dfea803 esp8266/modpybhspi: Add a HSPI module for hardware SPI support
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
Paul Sokolovsky 5e01fb01b3 docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip.
It used a standard BootROM programming algo and may be useful as a
fallback.
2016-08-10 21:40:40 +03:00
Paul Sokolovsky 2146cdab5e docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode. 2016-08-09 21:13:27 +03:00
Paul Sokolovsky 3e5534caf7 docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics. 2016-08-07 22:41:34 +03:00
Paul Sokolovsky d2cab0b7be docs/esp8266/tutorial/intro: Add anchor for link from quickeref. 2016-08-07 22:16:40 +03:00