Commit Graph

30 Commits

Author SHA1 Message Date
Paul Sokolovsky eac22e29a5 all: Consistently update signatures of .make_new and .call methods.
Otherwise, they serve reoccurring source of copy-paste mistakes and
breaking nanbox build.
2017-01-04 16:10:42 +03:00
Krzysztof Blazewicz 1ba516f475 stmhal/extint: Force 0 to 1 transition on swint().
If a user tries to call `swint()` while interrupt is disabled the flag in
SWIER is set but the interrupt is not triggered and therefore the SWIER bit
is not cleared.  When the interrupt is again enabled the next call to
`swint()` won't trigger the IRQ because a 0 to 1 transition will not occur.
2016-09-09 19:35:21 +10:00
Tobias Badertscher 495da15611 stmhal: L4: Add support for external interrupts/events.
The L4 MCU supports 40 Events/IRQs lines of the type configurable and
direct.  But this L4 port only supports configurable line types which are
already supported by uPy.  For details see page 330 of RM0351, Rev 1.

The USB_FS_WAKUP event is a direct type and there is no support for it.
2016-04-21 13:11:37 +01:00
Damien George 5b3f0b7f39 py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*.
The first argument to the type.make_new method is naturally a uPy type,
and all uses of this argument cast it directly to a pointer to a type
structure.  So it makes sense to just have it a pointer to a type from
the very beginning (and a const pointer at that).  This patch makes
such a change, and removes all unnecessary casting to/from mp_obj_t.
2016-01-11 00:49:27 +00:00
Dave Curtis 32b3549cce stmhal: Add symbolic #defines for interrupt levels in irq.h. 2015-11-01 23:23:39 +00:00
Damien George 731f359292 all: Add py/mphal.h and use it in all ports.
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for.  A
port will also provide mphalport.h with further HAL declarations.
2015-10-31 19:14:30 +03:00
Dave Hylands 8f59bacb92 stamhal: Add definitions for MCU_SERIES_F4 and MCU_SERIES_F7 2015-08-07 08:52:42 +01:00
Damien George 0851751615 stmhal: Factor GPIO clock enable logic into mp_hal_gpio_clock_enable.
Extracted GPIO clock enable logic into mp_hal_gpio_clock_enable
and called from anyplace which might need to use GPIO functions
on ports other than A-D.

Thanks to Dave Hylands for the patch.
2015-08-03 00:14:48 +01:00
Dave Hylands 92d4b51ad5 stmhal: Add STM32F7DISC and associated changes. 2015-07-30 00:38:32 +01:00
Damien George 5a11086d64 stmhal: Allow extint.c to compile without USB HS support. 2015-04-18 21:40:59 +01:00
Damien George 7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Damien George 3b51b3e90f stmhal: Collect all root pointers together in 1 place.
A GC in stmhal port now only scans true root pointers, not entire BSS.
This reduces base GC time from 1700ms to 900ms.
2015-01-07 23:38:50 +00:00
Damien George 2cf6dfa280 stmhal: Prefix includes with py/; remove need for -I../py. 2015-01-01 21:06:20 +00:00
Paul Sokolovsky 46c3ab2004 modsys: Add sys.print_exception(exc, file=sys.stdout) function.
The function is modeled after traceback.print_exception(), but unbloated,
and put into existing module to save overhead on adding another module.
Compliant traceback.print_exception() is intended to be implemented in
micropython-lib in terms of sys.print_exception().

This change required refactoring mp_obj_print_exception() to take pfenv_t
interface arguments.

Addresses #751.
2014-12-08 20:25:49 +00:00
Damien George ecc88e949c Change some parts of the core API to use mp_uint_t instead of uint/int.
Addressing issue #50, still some way to go yet.
2014-08-30 00:35:11 +01:00
Damien George ccacdf44b6 stmhal: Clean up reset/soft-reset code; fix bug init'ing VCP exc.
Make a clearer distinction between init functions that must be done
before any scripts can run (xxx_init0) and those that can be safely
deferred (xxx_init).

Fix bug initialising USB VCP exception.  Addresses issue #788.

Re-order some init function to improve reliability of
reset/soft-reset.
2014-08-04 11:09:51 +01:00
Damien George 40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00
Emmanuel Blot f6932d6506 Prefix ARRAY_SIZE with micropython prefix MP_ 2014-06-19 18:54:34 +02:00
Damien George 491cbd6a7c py: Add keyword arg support to enumerate constructor.
Need to have a policy as to how far we go adding keyword support to
built ins.  It's nice to have, and gets better CPython compatibility,
but hurts the micro nature of uPy.

Addresses issue #577.
2014-05-06 16:38:54 +00:00
Dave Hylands 1145a0706c Change references (in comments) of pyb.GPIO to be pyb.Pin
The documentation at http://micropython.org/doc/module/pyb/ExtInt should also be
updated.
2014-05-05 10:58:38 -07:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Paul Sokolovsky 9b71b16a94 unix,stmhal: Make "mpconfig.h" be first included, as other headers depend on it. 2014-05-02 18:08:16 +03:00
Damien George da9f27103d stmhal: Oops, typo. 2014-04-29 23:00:48 +01:00
Damien George 8d09640b22 stmhal: Add documentation in comments, and script to generate HTML.
Decided to write own script to pull documentation from comments in C code.
Style for writing auto generated documentation is: start line with ///
and then use standard markdown to write the comment.  Keywords
recognised by the scraper begin with backslash.  See code for examples.

Running: python gendoc.py modpyb.c accel.c adc.c dac.c extint.c i2c.c
led.c pin.c rng.c servo.c spi.c uart.c usrsw.c, will generate a HTML
structure in gendoc-out/.

gendoc.py is crude but functional.  Needed something quick, and this was
it.
2014-04-29 22:55:34 +01:00
Damien George dbc81df5d4 Simplify names for argcheck.c / arg parsing. 2014-04-26 11:19:17 +01:00
Damien George 6d3c5e4301 Add ARRAY_SIZE macro, and use it where possible. 2014-04-26 10:47:29 +01:00
Damien George fd6925b4b9 stmhal: Small bug fixes and simplifications. 2014-04-20 01:25:58 +01:00
Damien George 0a6e9f562f stmhal: Update ExtInt to allow keyword arguments in constructor. 2014-04-20 00:38:50 +01:00
Damien George d689430e79 stmhal: Add SPI class.
Also some updates to compile with latest changes to core py.
2014-04-20 00:16:30 +01:00
Damien George c66d86c5ce stmhal: Big cleanup; merge gpio into Pin; make names consistent.
This is an attempt to clean up the Micro Python API on the pyboard.
Gpio functionality is now in the Pin object, which seems more natural.
Constants for MODE and PULL are now in pyb.Pin.  Names of some
classes have been adjusted to conform to CamelCase.  Other
miscellaneous changes and clean up here and there.
2014-04-18 22:38:09 +01:00