microbuilder
fda065ea89
Minor scan example cleanup
2018-01-18 11:32:47 -08:00
microbuilder
e2ebcbe514
Simple BLE scanner example
2018-01-18 11:32:47 -08:00
microbuilder
1276c12097
Enable SD132v2.0.1 BLE and UBLUEPY support by default
2018-01-18 11:32:47 -08:00
Dan Halbert
23eb79ca8f
turn on MICROPY_ENABLE_SOURCE_LINE in nrf
2018-01-16 18:11:54 -08:00
Dan Halbert
01443a9619
Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf.
...
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
2018-01-16 18:11:54 -08:00
Radomir Dopieralski
8251abba8a
Merge pull request #520 from pewpew-game/2.x
...
Fix example for gamepad
2018-01-11 18:44:50 +01:00
Radomir Dopieralski
0ff128ec03
Fix example for gamepad
...
The example code for the gamepad module would skip detected
button presses in the code that waits for a button to be released,
because it would run it even when no button is pressed.
Also updated the example pin names to not use RX and TX.
2018-01-11 17:06:53 +01:00
Scott Shawcroft
d201ac20af
Fix sensor table. ( #517 )
...
RST is very picky about spacing.
2018-01-08 20:38:43 -05:00
Dan Halbert
2d5483082d
Checked wrong RCAUSE bit for system_reset
2018-01-08 15:45:07 -08:00
Dan Halbert
1805bcac76
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge) ( #513 )
...
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge)
RCAUSE (reset cause) is fetched differently in SAMD21 vs SAMD51
2018-01-08 09:44:06 -08:00
Dan Halbert
b1b89c409e
Merge pull request #512 from tannewt/gcc7
...
Switch to GCC7. The ARM release from Q4.
2018-01-05 17:41:50 -05:00
Scott Shawcroft
7e390886fb
Switch to GCC7. The ARM release from Q4.
2018-01-04 21:36:50 -08:00
Dan Halbert
5cb361cf1f
Merge pull request #510 from dhalbert/3.0_merge_2.2.0
...
merge from 2.2.0 + fix up board defs
2018-01-04 20:59:59 -05:00
Dan Halbert
d0cc8abd31
revise boards/ files for 3.0. All now compiled (but I don't have all to test).
2018-01-04 14:16:53 -05:00
Dan Halbert
19d353ccd9
nrf: fixups for changes from 2.2
...
1. bidirectional SPI support (@microbuilder please check)
2. slight changes in DigitalIO types
3. placeholders (not implemented yet) for single/double-click bootloader support
2018-01-03 16:50:57 -05:00
Dan Halbert
d8686cc002
use correct LD_FILE in mpconfigboard.mk for boards with external flash
2018-01-03 16:49:38 -05:00
Dan Conley
7d3bec46ae
Changing magnetic attribute in design guide ( #502 )
2018-01-02 20:03:20 -08:00
Dan Halbert
065e82015f
merge from 2.2.0 + fix up board defs
2018-01-02 21:25:41 -05:00
Dan Halbert
ce81c8dda9
Avoid gcc 7.2.1 compiler issues in nlr_push() ( #506 )
...
Avoid gcc 7.2.1 compiler issues in nlr_push()
2018-01-02 13:41:34 -08:00
Scott Shawcroft
3be456629b
Merge pull request #496 from microbuilder/nrf52_3.x
...
nRF52 update with internal file system support
2018-01-02 12:09:20 -08:00
Scott Shawcroft
a1a02c5427
Conditionally install build deps to speed up Travis
2018-01-02 11:54:11 -08:00
Dan Halbert
d9ae709045
Merge pull request #505 from dhalbert/2.2_update_cpx_frozen_libs
...
update CPX frozen modules to latest versions
2017-12-30 12:16:27 -05:00
Dan Halbert
9a50fa4a50
update CPX frozen modules to latest versions
2017-12-30 11:22:29 -05:00
Dan Halbert
18f3dfcd90
Merge pull request #503 from sommersoft/master
...
shared-bindings/index.rst: added audiobusio
2017-12-30 08:53:27 -05:00
sommersoft
881fa8e2b9
shared-bindings/index.rst: added audiobusio
...
shared-bindings/index.rst: added `aduiobusio` to Support Matrix. Used `audiobusio/_init_.c` to verify applicable ports; SAMD21 was the only one listed...ESP8266 wasn't. This fixes issue #448 .
2017-12-30 01:36:23 -06:00
hathach
a997ab258e
spacing clean up
2017-12-29 23:07:32 +07:00
hathach
6c8d60afc0
Merge branch 'nrf52_3.x' of github.com:microbuilder/circuitpython into nrf52_3.x
2017-12-29 22:44:40 +07:00
hathach
7f79a0e78c
added Ctrl+C interrupt
2017-12-29 22:43:31 +07:00
hathach
a021a9e5f0
update uart to remove dependency on machine uart module
2017-12-29 21:25:43 +07:00
microbuilder
7a69382f36
Added script to download SD files
2017-12-28 22:41:38 +01:00
microbuilder
5da455e398
Added feather52 to travis build list
2017-12-28 22:35:03 +01:00
microbuilder
178925640b
Moved comment to avoid abbreviation
2017-12-27 21:13:39 +01:00
microbuilder
f1e1699c9f
Added feather52 to travis build
2017-12-27 13:54:16 +01:00
Dan Halbert
94e645defa
Merge pull request #499 from dhalbert/2.x_frozen_module_version_info
...
Add git version info to frozen modules.
2017-12-24 14:58:42 -05:00
Dan Halbert
31be20744d
preprocess_frozen_modules.py: yet more Python 3.4 compatibility changes
2017-12-24 14:29:03 -05:00
Dan Halbert
644ad74ea1
preprocess_frozen_modules.py: make compatible with Python 3.4.
2017-12-24 13:49:58 -05:00
Dan Halbert
2dcb2f06cb
Add git version info to frozen modules.
2017-12-23 23:46:19 -05:00
Dan Halbert
e44fbca272
PDMIn: Make last DMA buffer be exactly the right length.
2017-12-23 09:35:45 -08:00
Dan Halbert
7918714043
certain odd-sized PDMIn record buffers would crash or not fill properly
2017-12-23 09:35:45 -08:00
microbuilder
a14bfeba64
Merge branch 'nrf52_3.x' of github.com:microbuilder/circuitpython into nrf52_3.x
2017-12-22 12:03:41 +01:00
microbuilder
60feb1a9aa
Added .gitattributes for ZIP bin support
2017-12-22 12:03:25 +01:00
Kevin Townsend
b3928288f0
Add files via upload
2017-12-22 12:02:15 +01:00
Kevin Townsend
8dcd9cc35c
Delete feather52_bootloader_5.0.0_s132_single.zip
2017-12-22 12:00:41 +01:00
Kevin Townsend
de72f7fabb
Delete feather52_bootloader_2.0.1_s132_single.zip
2017-12-22 12:00:34 +01:00
microbuilder
ad7cd0399d
Added 'mp_raise_NotImplementedError(NULL)'
2017-12-22 11:48:07 +01:00
microbuilder
b9e229f739
Removed old code snippets
2017-12-22 11:47:15 +01:00
microbuilder
ace872bf11
Added 'mp_raise_NotImplementedError(NULL)'
2017-12-22 11:45:51 +01:00
microbuilder
a3289c3c2f
Added D13 for standard LED examples
2017-12-22 11:42:33 +01:00
microbuilder
393bc9bce9
Removed leftover code snippet
2017-12-22 11:39:40 +01:00
microbuilder
c868b66f5b
Minor typo removed in path
2017-12-22 11:33:17 +01:00
