Damien George
5e756c9860
stmhal: Rename servo_TIM2_Handle -> TIM2_Handle.
2014-03-22 23:57:03 +00:00
Damien George
908a670dfc
stmhal: Add intensity method for blue LED.
...
As part of this, rejig the way TIM3 is initialised, since it's now
shared by USB CDC and the blue LED PWM.
2014-03-22 23:54:13 +00:00
Damien George
0119fc7532
stmhal: Servo driver can move at a given speed.
2014-03-22 18:34:16 +00:00
Damien George
e285511a23
stmhal: Get USB CDC REPL working.
...
New USB HAL is quite a bit improved over previous one. Now has better
callbacks and flow control.
REPL over USB CDC now works as before, except for soft-reset (since USB
driver uses malloc...).
2014-03-15 11:52:29 +00:00
Dave Hylands
ca5444e6cd
stmhal - add pin mapping, gpio, exti, usrsw
2014-03-14 23:41:28 -07:00
Dave Hylands
0a64c92a9c
stmhal - add led support. Add netduino_plus_2 support
...
Tweaked a couple of the USB files to compile if neither dev nor host was defined.
Tested on netduiono plus 2 and stm32f4discovery boards
2014-03-14 09:48:49 -07:00
Damien George
b30c02afa0
stmhal: Get USB enumerating a CDC device.
...
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00
Dave Hylands
ef39f2d9ca
Cleanup systick for stmhal
2014-03-13 14:40:49 -07:00
Dave Hylands
f14b92b9e1
REPl working on UART6 with STMHAL
2014-03-12 18:15:55 -07:00
Damien George
4ef1dbcbf6
stmhal: Get SysTick and HSE working.
2014-03-12 21:59:33 +00:00
