Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.
Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.
Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.
```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```
Closes: #7020
Closes: #7017
* Remove the 'GP23' alias for CYW1
* Remove the 'CYW0' alias for CYW0
* Switch VBUS_SENSE to CYW2, remove 'GP24' alias
Code that wants to use SMPS_MODE, VBUS_SENSE and LED while being
portable to the W and non-W variants should use those names, not alias
names.
* Remove A3 / VOLTAGE_MONITOR
Right now this cannot be used. The ability to check the voltage monitor
should be added back in some fashion in the future.
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
Before this, CIRCUITPY would start at 1MB anyway. This appeared to work
only because I hadn't checked the actual size of the CIRCUITPY drive,
and because until now the flash hadn't actually crossed that 1MB
boundary into CIRCUITPY storage.
WARNING: on pico_w, upgrading/downgrading CircuitPython across this commit
boundary will erase the CIRCUITPY filesystem. After this commit,
switching between pico and pico_w firmware will erase the CIRCUITPY
filesystem
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
