1348cb435b
Fix SAMD I2C frequency check
2022-07-29 19:07:33 -04:00
312e298890
Fix other ESP builds and arduino_nano_33_iot
2022-07-29 11:02:35 -07:00
d6344812e8
Lots of web workflow, C3 and title bar fixes
...
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548 .
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
3817d007aa
clean up esp32 sdkconfigs
2022-07-28 17:52:27 -04:00
c4c15206e7
Merge pull request #6608 from tannewt/web_workflow_port
...
Allow for dynamic reconfigure including port
2022-07-28 12:59:31 -07:00
282f8c49a6
Merge pull request #6660 from tannewt/fix_c3_serial_tx
...
Improve USB to Serial/JTAG TX
2022-07-28 14:42:56 -04:00
cb5fa3eaa6
Merge pull request #6664 from dglaude/patch-1
...
Add board.LED (alias of board.LED_R part of RGB)
2022-07-28 11:26:31 -07:00
c29fa9012d
Merge pull request #6645 from prplz/seeed_xiao_esp32c3
...
Add board: seeed_xiao_esp32c3
2022-07-28 11:22:43 -07:00
2baf3455bd
Add board.LED (alias of board.LED_R part of RGB)
...
Totally untested change (will try with the artifact), but I think every board should have a board.LED if possible to be able to use the learn guide basic instruction.
2022-07-28 16:46:56 +02:00
ddeb833a3a
Shrink Feather S3 4mb build with -Os
2022-07-28 07:43:39 -07:00
555bf7cc12
Add board: seeed_xiao_esp32c3
2022-07-28 22:48:03 +10:00
bea955222a
Improve USB to Serial/JTAG TX
...
It had a tight 5ms timeout before that caused some characters to
drop. Now the wait is longer and reset after a successful transmit.
This follows what MicroPython does.
Fixes #6220
2022-07-27 12:15:13 -07:00
ce60beeb25
Merge pull request #6651 from tannewt/refine_select_task
...
Improve web workflow responsiveness
2022-07-27 11:24:51 -07:00
6463755577
Merge pull request #6648 from pypewpew/stage-png
...
Add PNG image support to the Stage library
2022-07-27 11:02:48 -07:00
e9e2d8550c
Merge pull request #6657 from nitz/adafruit-magtag-2.9-add-boot0
...
Adds `BOOT0` (`GPIO0`) as a named pin for MagTag.
2022-07-27 11:01:26 -07:00
2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag.
2022-07-27 08:38:52 -04:00
a55aebc718
Added support for 8MB flash for Challenger 840
2022-07-26 20:34:01 -05:00
931757f4a9
Improve web workflow responsiveness
...
1. Run the socket select task at the same priority as CP. This is
needed because it queues up the background work. Without it, CP
needed to sleep to let the lower priority task go.
2. Close the active socket on disconnect. This prevents looping
over a disconnected but not closed socket.
Fixes #6610 . Fixes #6613
2022-07-26 15:29:49 -07:00
d510e60511
Disable bitmaptools and busdevice on pewpew_m4 to fit ja translation
2022-07-27 00:08:02 +02:00
6e5c818311
fix extensions for atmel and 2 boards, matching main
2022-07-26 18:15:59 +02:00
87e8994c4a
no default extension for ESP, fix duplicate line in rp2
2022-07-26 18:15:59 +02:00
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
66d5fa9a55
Save space on Feather S3 4mb with -Os
2022-07-25 16:19:52 -07:00
6d6234443d
Merge remote-tracking branch 'adafruit/main' into web_workflow_port
2022-07-25 15:57:58 -07:00
acdfda7d0e
Merge pull request #6624 from bwshockley/bwshockley-figpi
...
Add raspberrypi port - figpi
2022-07-25 15:23:52 -07:00
c90167a9db
Merge pull request #6630 from ViktorWiz/w5500-evb-pico
...
Add WIZNet W5500-EVB-Pico
2022-07-25 15:16:32 -07:00
47f718aa92
Merge pull request #6615 from askpatrickw/beetle-esp32-c3
...
Beetle esp32 c3
2022-07-25 15:00:05 -07:00
955bcee1b3
It's OK for an init program to be zero bytes long
...
Closes #6636
2022-07-23 20:01:31 -05:00
ae6c0e347c
Add WIZNet W5500-EVB-Pico
2022-07-22 17:31:58 +09:00
dc686545c2
Update pins.c
...
Minor whitespace change.
2022-07-20 15:40:43 -05:00
e9eeaf2096
Update mpconfigboard.h
...
Moved UART to pins 24/25.
2022-07-20 12:35:40 -05:00
d01b65dd32
Create pins.c
2022-07-20 12:35:08 -05:00
3861a97f38
Create pico-sdk-configboard.h
2022-07-20 12:18:22 -05:00
3647cfa424
Create mpconfigboard.mk
2022-07-20 12:17:39 -05:00
d2865764ca
Create mpconfigboard.h
...
Added file.
2022-07-20 12:12:31 -05:00
21af8f42cc
Create board.c
2022-07-20 11:11:49 -05:00
f2bbe5a6a1
Merge pull request #6614 from litui/litui-espressif-bleiofix
...
Fixed empty characteristic issue with bleio+nimble.
2022-07-20 08:42:31 -04:00
e877644012
use -Os on Feather ESP32-S3 TFT to shrink build
2022-07-19 17:45:29 -04:00
bb47484cb1
Merge remote-tracking branch 'adafruit/main' into from_bytes-check-parameters
2022-07-19 17:18:26 -04:00
1cdf325c96
shrink Feather ESP32S3 TFT
2022-07-19 16:35:23 -04:00
51f2253cef
no Russian font for SAMD21; adjust unix build warnings
2022-07-19 14:07:18 -04:00
1e99d68af7
Add Creator ID
2022-07-17 12:38:27 -07:00
71c22232f0
board config compelted
2022-07-17 11:48:45 -07:00
868a03ff57
Fixed empty characteristic issue with bleio+nimble.
...
- Based on espressif/nimble's blecent example code. Confirms that the characteristic is not empty before trying to catalogue its descriptors.
- Running ble_gattc_disc_all_dscs on empty (no length) characteristics fails with the (not-very-informative) BLE_HS_EINVAL error if this check is not performed.
2022-07-17 04:50:50 -06:00
78b4159448
Allow for dynamic reconfigure including port
2022-07-15 16:33:12 -07:00
4e6fa55cba
Merge pull request #6591 from tannewt/web_workflow_ticks
...
Add socket select task to wake CP
2022-07-15 18:30:43 -05:00
c2a8ef752c
Remove ps2io to make space
2022-07-15 14:01:50 -07:00
6e7fdcc24b
Add wait for MDNS hostname to be set
2022-07-15 13:48:19 -07:00
145cce93da
Merge pull request #6596 from Neradoc/ble-name-in-dotenv
...
Setup default BLE name in dotenv
2022-07-14 15:46:28 -07:00
dcc27a8c88
Need to ensure wifi radio is set enabled again on esp32
...
.. otherwise, nothing set it enabled on the second soft reboot.
2022-07-14 15:09:26 -05:00
72f5537027
esp32: don't fully reset the wifi device
...
.. this makes reconnecting without a full reset not work.
Because this works on other generations of the esp32 (c2, c3, etc),
apply this behavior only to esp32.
After this change, it's possible to connect multiple times to wifi in
different runs of code.py or the repl after soft rebooting.
2022-07-14 15:01:15 -05:00
5ca6d8953d
use available constants instead of testing errors for length
2022-07-14 11:55:53 +02:00
50a9beda04
Retrieve the BLE name from dotenv if available
...
Format:
CIRCUITPY_BLE_NAME = My BLE Board
- the length is limited to 31 characters
- for the NRF version it repeatedly truncates the name if it's too long
- the ESP version defaults to "nimble" if the name is too long
2022-07-14 11:55:53 +02:00
e9dd254127
Add socket select task to wake CP
...
This fixes the web workflow on boards without a display.
Fixes #6552
2022-07-13 17:35:35 -07:00
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
2f9de1cb07
Merge pull request #6584 from tannewt/websocket_serial
...
Add WebSocket at /cp/serial/
2022-07-13 14:15:49 -07:00
09b754ffa0
espressif: Set heap size automatically, like micropython
...
rather than setting the heap size statically, micropython allocates
the biggest contiguous chunk possible, but in no event more than half the
total internal sram. On esp32 this gives 123728 bytes of `gc.mem_free`
in the repl.
2022-07-13 14:00:59 -05:00
09d1c846c4
Set heap size to 0 when heap allocation fails
2022-07-13 13:53:22 -05:00
c1b6c367ff
esp32 can allocate 88kB successfully
2022-07-13 13:53:08 -05:00
13be10ef14
rename function to avoid confusion
2022-07-13 13:28:51 -05:00
5c6ee20ca5
on esp32 need to initialize nvs before starting wifi
...
Also, change error handling so that the esp-idf error number
is shown in the traceback in the case of an error.
This allows scanning & connecting to work. I didn't try requests yet.
2022-07-13 11:57:38 -05:00
f620c2901c
Set a small but working heap size for esp32 without psram
2022-07-13 11:10:00 -05:00
ea52ca66dc
Disable SPIRAM bankswitch on esp32
...
We don't use this facility, which was reserving the last 256kiB of
psram.
2022-07-13 10:56:58 -05:00
953f44b46e
Fix spiram limit calculation on esp32
...
esp32 places the psram start at SOC_EXTRAM_DATA_LOW and it can extend
up to SOC_EXTRAM_DATA_SIZE. This is different than esp32-s2 and later,
which place the end at EXTRAM_DATA_HIGH and the limitation of
SOC_EXTRAM_DATA_SIZE was not previously identified as important.
Additionally, the esp32 has a reserved area within himem which was
not being accounted for.
With this change, the Feather ESP32 V2 feather can be used via thonny,
and the other "quick memory corruption tests" I was performing
also all succeed instead of failing.
Before this change, the incorrect address being used for spiram was
0x3fa00000..0x3fc00000 (2MiB). Now, it's 0x3f800000..0x3f9c0000 (1.75MiB)
due to the reserved area and the changed start address.
This is intended to be a no-effect change for other espressif chips besides
original esp32.
2022-07-13 10:52:15 -05:00
afbaa2eb6c
decode_backtrace: Show even more information
...
addr2line can show information about how functions were inlined,
including function names
Typical new output:
```
0x400dec57: mp_obj_get_type at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:68
(inlined by) mp_obj_print_helper at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:133
(inlined by) mp_obj_print_helper at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:114
0x400e1a25: fun_builtin_1_call at /home/jepler/src/circuitpython/ports/espressif/../../py/objfun.c:75
0x400dd016: mp_call_function_n_kw at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:665
0x400eac99: mp_execute_bytecode at /home/jepler/src/circuitpython/ports/espressif/../../py/vm.c:936
0x400e1ae9: fun_bc_call at /home/jepler/src/circuitpython/ports/espressif/../../py/objfun.c:297 (discriminator 4)
0x400dd016: mp_call_function_n_kw at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:665
0x400dd03a: mp_call_function_0 at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:638
0x40117c03: parse_compile_execute at /home/jepler/src/circuitpython/ports/espressif/../../shared/runtime/pyexec.c:146
0x4011800d: pyexec_friendly_repl at /home/jepler/src/circuitpython/ports/espressif/../../shared/runtime/pyexec.c:734
0x400eeded: run_repl at /home/jepler/src/circuitpython/ports/espressif/../../main.c:823
(inlined by) main at /home/jepler/src/circuitpython/ports/espressif/../../main.c:922
0x400ef5e3: app_main at /home/jepler/src/circuitpython/ports/espressif/supervisor/port.c:410
0x401bb461: main_task at /home/jepler/src/circuitpython/ports/espressif/build-adafruit_feather_esp32_v2/esp-idf/../../esp-idf/components/freertos/port/port_common.c:141
```
2022-07-12 16:28:33 -05:00
9d5b04ebc4
Merge pull request #6577 from NathanY3G/uf2-family-id-for-stm32f405
...
stm: Make family IDs consistent with TinyUF2
2022-07-12 13:38:40 -07:00
23bbb19138
Merge remote-tracking branch 'adafruit/main' into websocket_serial
2022-07-12 13:15:38 -07:00
d9f6e99942
Fix RP2040 UART
...
It couldn't receive more than 32 bytes in while checking in_waiting
because in_waiting didn't turn interrupts back on correctly.
Fixes #6579
2022-07-11 13:36:44 -07:00
d8447de0b0
Merge pull request #6578 from xuhow/picoed_led_status
...
Picoed led status
2022-07-11 13:23:02 -07:00
c56f363a23
Merge pull request #6572 from todbot/wifi-tx-power-float
...
Fix #6559
2022-07-11 13:08:11 -07:00
e7703e89c9
Merge pull request #6567 from jepler/update-ulab-509
...
update ulab to 5.0.9
2022-07-11 13:05:41 -07:00
08b4a64bd2
Update the PID
2022-07-11 08:39:10 -07:00
be3482ff05
Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed
2022-07-11 16:51:06 +08:00
f22f4f896a
stm: Make family IDs consistent with TinyUF2
...
This should allow UF2 images for STM32F405 boards to be flashed by
TinyUF2.
2022-07-10 21:34:07 +02:00
a658007673
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:26 -07:00
22e061ba35
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:18 -07:00
98692150ac
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:12 -07:00
f464ec3047
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:02 -07:00
9d77a36fbf
update samd-peripherals submodule
2022-07-08 22:47:36 -04:00
bc14b7ad47
Fix the display on the esp box lite
2022-07-08 15:40:59 -07:00
2c7ad7a39f
make translate and pre-commit formatting fixes
2022-07-08 16:53:53 -04:00
3c093713dc
Merge branch 'esp_box_lite' of https://github.com/tannewt/circuitpython into esp_box_lite
2022-07-08 13:46:14 -07:00
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
d869b441f4
further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR
2022-07-08 15:27:00 -04:00
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
afbf4de071
Uncomment or remove debugging changes
2022-07-08 12:53:25 -04:00
c3cd32e773
CPU freq to 240 MHz, redo sdkconfigs
2022-07-08 10:50:00 -04:00
75208573f4
tweak sdkconfig; add temp logging to mp_make_function_from_raw_code
2022-07-08 09:53:29 -04:00
d3e1d1b104
Fix #6559
2022-07-07 19:42:11 -07:00
ab3e786611
disable additional module on matrixportal_m4
2022-07-07 20:00:12 -05:00
c4dfd8e30a
Fix default BOARD setting & messages
...
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
2022-07-07 17:17:15 -05:00
601eb91b89
Disable gifio on matrixportal to reclaim flash space
2022-07-07 17:00:00 -05:00
4e88d795e1
Thonny causing crash emitglue.c:199:
2022-07-06 23:01:19 -04:00
4c20b3cb63
Merge pull request #6564 from adafruit/7.3.x
...
7.3.x
2022-07-06 15:25:24 -04:00
d83720f659
Tweak display init
2022-07-05 17:02:52 -07:00
cd77517b2f
Add build for ESP32-S3 Box Lite
2022-07-05 16:35:42 -07:00
18d7165e0f
Merge pull request #6550 from crackmonkey/rp2040-wait-pin-bounds
...
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-05 12:56:14 -07:00
dce9396fe3
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-02 14:32:20 -07:00
07b2697ae3
WIP websocket to serial
2022-07-01 16:57:10 -07:00
c3cf9ba9ce
remove wifi max from sdkconfig
2022-07-01 14:50:47 -07:00
aaeda97818
update PHY section, correct name
2022-07-01 14:50:47 -07:00
aa53d36934
setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5
2022-07-01 14:50:47 -07:00
7e367eeb58
Update "D" mappings
2022-07-01 14:50:47 -07:00
d4b26daf1b
correct creator and creation IDs
2022-07-01 14:50:47 -07:00
6c7faf0eba
Change USB VID & PID to Creator and Creation IDs
2022-07-01 14:50:47 -07:00
3253ae2503
tested and corrected several pins
2022-07-01 14:50:47 -07:00
f10fa566aa
REPL works. Based on QTPYC3.
2022-07-01 14:50:47 -07:00
a3070f6c2a
Changes to Pin Mappings
2022-07-01 14:50:46 -07:00
b37236f83f
C3 does not have PSRAM
2022-07-01 14:50:46 -07:00
af629ab180
Add assumed PID value
2022-07-01 14:50:46 -07:00
c1e6003d26
remove comment that breaks {ID Checker
2022-07-01 14:50:46 -07:00
9bae8549c5
add UART RX TX to mpconfigboard
2022-07-01 14:50:46 -07:00
6763b7b968
add A5
2022-07-01 14:50:46 -07:00
bcf27e146b
fix build break and add io 20/21
2022-07-01 14:50:46 -07:00
dc1c86738a
Initial pin mapping pass
2022-07-01 14:50:46 -07:00
fd4695d0f2
Gettting started with pin mapping.
2022-07-01 14:50:46 -07:00
8814ee03f1
Merge pull request #6542 from todbot/wifi-tx-power
...
Add wifi.radio.tx_power
2022-07-01 14:09:08 -04:00
7589e53fea
WIP websocket accept and hashlib
2022-07-01 10:18:33 -07:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
187f156ac7
Merge pull request #6534 from tannewt/esp_wdt_safe_mode
...
Safe mode when ESP interrupt watchdog fires
2022-06-30 22:56:35 -04:00
63873e2c14
Merge pull request #6528 from tannewt/cp_webserver
...
Add web workflow to ESP boards
2022-06-30 22:53:47 -04:00
698d563dcf
adust wifi.radio.tx_power to be x4 (in db) as mentioned in #6540
2022-06-30 15:33:03 -07:00
2a563cc8ba
first cut at wifi.radio.tx_power
2022-06-30 15:10:16 -07:00
71358a4a63
Merge pull request #6526 from xuhow/elecfreaks_picoed
...
Add some frozen libraries to elecfreaks_picoed
2022-06-30 11:53:59 -07:00
b0efd130c9
ESP32 REPL working through debug UART
2022-06-29 23:19:36 -04:00
3be3e89d82
Merge branch 'main' into cp_webserver
2022-06-29 14:01:32 -07:00
c3a149c14a
Merge pull request #6533 from tannewt/fix_connect_crash
...
Fix auto-wifi created crash
2022-06-29 16:51:33 -04:00
d42c811fb9
Safe mode when ESP interrupt watchdog fires
...
This makes us enter safe mode when sleep on the S3 fails. The
task watchdog is used for the user watchdog.
2022-06-29 12:31:18 -07:00
8dc8265275
Fix auto-wifi created crash
...
The wifi event_handler runs on the other core so we need to be
careful when calling into CP APIs.
Fixes #6503
2022-06-29 11:53:10 -07:00
1f065a313c
Update with startup fix instead of revert
2022-06-29 11:12:29 -07:00
1599844b82
Add some frozen libraries to elecfreaks_picoed
2022-06-29 15:03:29 +08:00
780c4963cb
wip; change never-ever reset pin mechanism
2022-06-28 23:06:49 -04:00
a8bb3eb557
Update to newer 4.4 branch
2022-06-28 15:38:55 -07:00
ca64950503
wip fixes
2022-06-28 18:32:08 -04:00
131d70cebd
restore traceback to matrixportal build
2022-06-28 16:10:55 -04:00
41039445c9
Clean up and add docs
2022-06-27 13:39:09 -07:00
7acc5ebeb9
Add logo for going to home. Fix origin check
2022-06-27 13:39:09 -07:00
3cd05291d0
Static files + welcome page
2022-06-27 13:39:09 -07:00
7543dd9af0
CORS works and autoreload too
2022-06-27 13:39:08 -07:00
92593aa7a1
Fix bind, remove hard coded ip
2022-06-27 13:34:13 -07:00
4f0a7aedfd
WIP adding devices.json and auth
2022-06-27 13:34:13 -07:00
32478345f8
more tweaks
2022-06-27 13:34:13 -07:00
0882cbf823
web server kinda works
2022-06-27 13:34:13 -07:00
61d0f7947b
WIP doesn't flush response before closing
2022-06-27 13:34:13 -07:00
301f3e0456
Start of web server
2022-06-27 13:34:13 -07:00
55784c93de
wip; compiles
2022-06-26 21:22:22 -04:00
02069eb0b5
wip
2022-06-23 15:59:06 -04:00
a055113ed5
Merge pull request #6520 from dhalbert/7.3.1-to-main
...
Merge 7.3.1 changes to main
2022-06-23 11:15:40 -07:00
b0219f9b5b
Merge pull request #6518 from xorbit/rp2040-shim
...
Add board Silicognition LLC RP2040-Shim
2022-06-23 11:04:40 -04:00
Dan Halbert
Scott Shawcroft
Dan Halbert
David Glaude
Michael Himing
Chris Dailey
Arudinne
Radomir Dopieralski
Neradoc
Jeff Epler
ViktorWiz
Benjamin Shockley
Patrick
Aria Burrell
Melissa LeBlanc-Williams
Xu Hao
Nathan Young
Tod Kurt
Nick Lopez