6545336206
cc3200: Make the WDT aware of the servers sleep/wake state.
2015-05-25 21:14:54 +02:00
5cd34aca27
cc3200: Use the correct ADC channel index when creating the object.
2015-05-25 21:14:46 +02:00
95f19b4542
cc3200: Remove duplicated checks for boot.py and main.py existency.
2015-05-25 21:14:39 +02:00
90d7c4ef3d
cc3200: Make HeartBeat.disable() thread safe.
2015-05-25 21:14:31 +02:00
3cb804de26
cc3200: Remove NIC abstraction layer.
...
That layer is nice, but the CC3200 doesn't need it and getting rid of
it saves ~200 bytes, which are more than welcome.
2015-05-24 11:44:08 +02:00
9f8c5456be
cc3200: Reset the servers and close user sockets on WLAN disconection.
...
This is needed to avoid half-open connections.
2015-05-24 11:44:06 +02:00
ed56b0baba
cc3200: Finally unlock the full wake on WLAN feature set.
2015-05-22 19:53:33 +02:00
18030bd85d
cc3200: Add own ubinascii module.
...
The reason to have our owm ubinascii module is so that later we
can add crc32 support using the hardware engine.
2015-05-22 09:56:11 +02:00
7506db4ccb
cc3200: Remove uhashlib.hexdigest().
2015-05-21 18:51:57 +02:00
e800db562f
cc3200: Add uhashlib. Supports SHA1 and SHA256.
2015-05-20 11:44:24 +02:00
5e38b48dd6
cc3200: Fix time.localtime() so that it returns the correct fields.
2015-05-20 11:44:22 +02:00
56053c37cf
cc3200: Rewrite WLAN.ifconfig(). Add WLAN.info() and WLAN.connections().
2015-05-20 11:44:21 +02:00
514ba15d6a
cc3200: Disable UCTYPES and enable ARRAY_SLICE_ASSIGN.
2015-05-20 11:44:19 +02:00
6f848b6dba
cc3200: Set the timer edge count interrupt value in the calbback const.
2015-05-17 16:11:12 +02:00
95a4f61499
cc3200: Make sure RTC wake value is >= 1ms.
2015-05-17 16:09:27 +02:00
c27dc38e85
cc3200: Re-name 'intmode' to 'mode' in the callback API.
2015-05-17 14:49:17 +02:00
cd3f2523f1
cc3200: Disable WLAN.urn() by default.
...
Can be enabled by defining MICROPY_PORT_WLAN_URN=1 in mpconfigport.h.
2015-05-17 14:20:24 +02:00
a379b6ed11
cc3200: Add optional timeout param to WLAN.connect().
2015-05-17 14:05:44 +02:00
fb9e4cf463
cc3200: Make sure to handle all pending pin interrupts.
...
When entering the interrupt handler of a given GPIO port, more than
one pin could have pending interrupts, therefore care must be taken
to service each interrupt one by one before leaving.
2015-05-17 13:42:15 +02:00
8e611e8414
cc3200: Add Timer module. Supports free running, PWM and capture modes.
2015-05-17 12:34:49 +02:00
9466e154b4
cc3200: Fix power mode param check in the UART callback constructor.
2015-05-17 12:26:40 +02:00
2b62707051
cc3200: Add os.rename()
2015-05-17 12:22:17 +02:00
1db4253886
lib: Move time utility functions to common library.
2015-05-13 00:12:54 +01:00
c50772d19f
py: Add mp_obj_get_int_truncated and use it where appropriate.
...
mp_obj_get_int_truncated will raise a TypeError if the argument is not
an integral type. Use mp_obj_int_get_truncated only when you know the
argument is a small or big int.
2015-05-12 23:05:53 +01:00
2bdefea9d6
cc3200: Enable MICROPY_MODULE_WEAK_LINKS.
2015-05-07 12:19:31 +02:00
e04aa96b4d
cc3200: Define MICROPY_CPYTHON_COMPAT=0.
...
This only disables some corner case functionality to keep C Python
compatibility, and saves ~600 bytes.
2015-05-05 11:23:06 +02:00
04ee5983fe
lib: Move some common mod_network_* functions to lib/netutils.
2015-05-04 11:48:40 +01:00
8c8d7f3c60
cc3200: Clean up pyb.Pin
...
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.
This reduces code size by ~500 bytes.
2015-05-03 11:26:56 +02:00
e4c899a08c
cc3200: WLAN.ifconfig returns an attrtuple instead of a dictionary.
2015-05-03 11:26:25 +02:00
f54bdecff2
cc3200: Implement Sleep.wake_reason()
2015-05-03 11:21:14 +02:00
71d482df47
cc3200: Clear the pending interrupt flag when disabling RTC callbacks.
2015-05-03 11:21:12 +02:00
6f218d7472
cc3200: Move wlan_init0() to the boot section.
...
This one creates a semaphore, therefore it must be executed only
after a hard reset (or when coming out of hibernation).
2015-04-29 16:10:40 +02:00
d8713d78f5
cc3200: Correct Sleep module name. Must be 'Sleep', not 'sleep'.
2015-04-29 15:27:28 +02:00
e282884e54
cc3200: When requesting safe boot, blink the led 3 times, not 4.
2015-04-29 15:27:21 +02:00
dbb4aef5e3
cc3200: Make WLAN.isconnected() also work in AP mode.
...
While in STA mode isconnected() returns True when connected to an AP
and the IP has been acquired. In AP mode, WLAN.isconnected() returns
True if at least one connected station is present.
2015-04-29 15:26:21 +02:00
bf4576dc91
cc3200: Clean-up servers enable/disable algorithm.
2015-04-29 14:25:44 +02:00
95f53461c2
py: Replace py-version.sh with makeversionhdr.py, written in Python.
...
Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-28 23:52:36 +01:00
d11317bcab
cc3200: Make WLAN scan results a list of attrtupple.
...
Each result is displayed like this:
ssid='MySSID', bssid=b'\xc0J\x00z.\xcc', security=2, channel=None, rssi=-74
The CC3200 doesn't provide channel info, that why is 'None'.
2015-04-29 00:04:01 +02:00
5225e29ce7
cc3200: Remove unneeded -lgcc in Makefile.
2015-04-29 00:03:58 +02:00
f81684141e
cc3200: Implement os.uname() to get details of the OS and hardware.
2015-04-29 00:03:56 +02:00
6fefd5d330
cc3200: Move telnet_process_credential with the other private functions.
...
Just for consistency.
2015-04-29 00:03:54 +02:00
f1ed8c8a2e
cc3200: Improve telnet_parse_input() in case of an incomplete option.
2015-04-28 16:48:33 +02:00
0458833072
cc3200: Make telnet login procedure work with Tera Term.
...
This is actually a workaround Ter Term's issue of not obeying to the
telnet options that the server is sending. Therefore, we must buffer
chars until either a '\r' or the max length of the username/password
is received.
2015-04-28 16:48:26 +02:00
9fbc265eb8
cc3200: Add delays to allow the servers to start and stop properly.
2015-04-28 15:16:33 +02:00
d34c4784a5
cc3200: Select NIC when the socket is created.
...
This makes sense since only WLAN is supported here.
2015-04-28 15:14:36 +02:00
7c8b4c1a8b
cc3200: Correct MAKE_SOCKADDR and UNPACK_SOCKADDR byte order.
2015-04-25 23:36:45 +02:00
eaefc8b9d6
cc3200: Add WiPy specific information to README.md
2015-04-22 21:03:10 +02:00
df5d9c77f4
cc3200: Fix bootloader and modpyb after printf overhaul.
...
The bootloader needs string0.c because of memset, memcpy and others,
without string0.c it magically links, but calling any of those
functions results in a hard fault.
In debug mode, modpyb needs printf, and including stdio.h leads to
conflicts due to the redefinitions made in the simplelink drivers.
2015-04-19 20:59:10 +02:00
259eaab9a9
cc3200: Clean up and reduce use/include of std.h.
2015-04-18 14:29:28 +01:00
c1a77a0c9f
cc3200: Use new %q format to print qstr's where appropiate.
2015-04-17 10:15:55 +02:00
Daniel Campora
Josef Gajdusek
Damien George
Matt Anderson