In case of empty non-blocking read()/write(), both return None. read()
cannot return 0, as that means EOF, so returns another value, and then
write() just follows. This is still pretty unexpected, and typical
"if not len:" check would treat this as EOF. Well, non-blocking files
require special handling!
This also kind of makes it depending on POSIX, but well, anything else
should emulate POSIX anyway ;-).
Need to have a policy as to how far we go adding keyword support to
built ins. It's nice to have, and gets better CPython compatibility,
but hurts the micro nature of uPy.
Addresses issue #577.
There are 2 locations in parser, and 1 in compiler, where memory
allocation is not precise. In the parser it's the rule stack and result
stack, in the compiler it's the array for the identifiers in the current
scope. All other mallocs are exact (ie they don't allocate more than is
needed).
This patch adds tuning options (MP_ALLOC_*) to mpconfig.h for these 3
inexact allocations.
The inexact allocations in the parser should actually be close to
logarithmic: you need an exponentially larger script (absent pathological
cases) to use up more room on the rule and result stacks. As such, the
default allocation policy for these is now to start with a modest sized
stack, but grow only in small increments.
For the identifier arrays in the compiler, these now start out quite
small (4 entries, since most functions don't have that many ids), and
grow incrementally by 6 (since if you have more ids than 4, you probably
have quite a few more, but it wouldn't be exponentially more).
Partially addresses issue #560.
This will work if MICROPY_DEBUG_PRINTERS is defined, which is only for
unix/windows ports. This makes it convenient to user uPy normally, but
easily get bytecode dump on the spot if needed, without constant recompiles
back and forth.
TODO: Add more useful debug output, adjust verbosity level on which
specifically bytecode dump happens.
Blanket wide to all .c and .h files. Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.
Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
By default mingw outputs 3 digits instead of the standard 2 so all float
tests using printf fail. Using setenv at the start of the program fixes this.
To accomodate calling platform specific initialization a
MICROPY_MAIN_INIT_FUNC macro is used which is called in mp_init()
The original parsing would error out on any C declarations that are not typedefs
or extern variables. This limits what can go in mpconfig.h and mpconfigport.h,
as they are included in qstr.h. For instance even a function declaration would be
rejected and including system headers is a complete no-go.
That seems too limiting for a global config header, so makeqstrdata now
ignores everything that does not match a qstr definition.
alloca() is declared in alloca.h which als happens to be included by stdlib.h.
On mingw however it resides in malloc.h only.
So if we include alloca.h directly, and add an alloca.h for mingw in it's port
directory we can get rid of the mingw-specific define to include malloc.h
and the other ports are happy as well.
Biggest part of this support is refactoring mp_obj_class_lookup() to return
standard "bound member" pair (mp_obj_t[2]). Actual support of inherited
native methods is 3 lines then. Some inherited features may be not supported
yet (e.g. native class methods, native properties, etc., etc.). There may
be opportunities for further optimization too.
This implements checking of base types, allocation and basic initialization,
and optimized support for special method lookups. Other features are not yet
supported.
Of course, keywords are turned into lexer tokens in the lexer, so will
never need to be interned (unless you do something like x="def").
As it is now, the following on pyboard makes no new qstrs:
import pyb
pyb.info()
New way uses slightly less ROM and RAM, should be slightly faster, and,
most importantly, allows to catch the error "non-keyword arg following
keyword arg".
Addresses issue #466.
Also add some more debugging output to gc_dump_alloc_table().
Now that newly allocated heap is always zero'd, maybe we just make this
a policy for the uPy API to keep it simple (ie any new implementation of
memory allocation must zero all allocations). This follows the D
language philosophy.
Before this patch, a previously used memory block which had pointers in
it may still retain those pointers if the new user of that block does
not actually use the entire block. Eg, if I want 5 blocks worth of
heap, I actually get 8 (round up to nearest 4). Then I never use the
last 3, so they keep their old values, which may be pointers pointing to
the heap, hence preventing GC.
In rare (or maybe not that rare) cases, this leads to long, unintentional
"linked lists" within the GC'd heap, filling it up completely. It's
pretty rare, because you have to reuse exactly that memory which is part
of this "linked list", and reuse it in just the right way.
This should fix issue #522, and might have something to do with
issue #510.
3 emitter functions are needed only for emitcpy, and so we can #if them
out when compiling with emitcpy support.
Also remove unused SETUP_LOOP bytecode.
Closed over variables are now passed on the stack, instead of creating a
tuple and passing that. This way memory for the closed over variables
can be allocated within the closure object itself. See issue #510 for
background.
There were typos, various rounding errors trying to do concurrent counting
in bytes vs blocks, complex conditional paths, superfluous variables, etc.,
etc., all leading to obscure segfaults.
These are to assist in writing native C functions that take positional
and keyword arguments. mp_arg_check_num is for just checking the
number of arguments is correct. mp_arg_parse_all is for parsing
positional and keyword arguments with default values.
When querying an object that supports the buffer protocol, that object
must now return a typecode (as per binary.[ch]). This does not have to
be honoured by the caller, but can be useful for determining element
size.
Test usecase I used is print(time.time()) and print(time.time() - time.time()).
On Linux/Glibc they now give the same output as CPython 3.3. Specifically,
time.time() gives non-exponential output with 7 decimal digits, and subtraction
gives exponential output e-06/e-07.
On stmhal, computed gotos make the binary about 1k bigger, but makes it
run faster, and we have the room, so why not. All tests pass on
pyboard using computed gotos.
This follows pattern already used for objtuple, etc.: objfun.h's content
is not public - each and every piece of code should not have access to it.
It's not private either - with out architecture and implementation language
(C) it doesn't make sense to keep implementation of each object strictly
private and maintain cumbersome accessors. It's "local" - intended to be
used by a small set of "friend" (in C++ terms) objects.
Things get tricky when using the nlr code to catch exceptions. Need to
ensure that the variables (stack layout) in the exception handler are
the same as in the bit protected by the exception handler.
Prior to this patch there were a few bugs. 1) The constant
mp_const_MemoryError_obj was being preloaded to a specific location on
the stack at the start of the function. But this location on the stack
was being overwritten in the opcode loop (since it didn't think that
variable would ever be referenced again), and so when an exception
occurred, the variable holding the address of MemoryError was corrupt.
2) The FOR_ITER opcode detection in the exception handler used sp, which
may or may not contain the right value coming out of the main opcode
loop.
With this patch there is a clear separation of variables used in the
opcode loop and in the exception handler (should fix issue (2) above).
Furthermore, nlr_raise is no longer used in the opcode loop. Instead,
it jumps directly into the exception handler. This tells the C compiler
more about the possible code flow, and means that it should have the
same stack layout for the exception handler. This should fix issue (1)
above. Indeed, the generated (ARM) assembler has been checked explicitly,
and with 'goto exception_handler', the problem with &MemoryError is
fixed.
This may now fix problems with rge-sm, and probably many other subtle
bugs yet to show themselves. Incidentally, rge-sm now passes on
pyboard (with a reduced range of integration)!
Main lesson: nlr is tricky. Don't use nlr_push unless you know what you
are doing! Luckily, it's not used in many places. Using nlr_raise/jump
is fine.
The autogenerated header files have been moved about, and an extra
include dir has been added, which means you can give a custom
BUILD=newbuilddir option to make, and everything "just works"
Also tidied up the way the different Makefiles build their include-
directory flags
That was easy - just avoid erroring out on seeing candidate dir for namespace
package. That's far from being complete though - namespace packages should
support importing portions of package from different sys.path entries, here
we require first matching entry to contain all namespace package's portions.
And yet, that's a way to put parts of the same Python package into multiple
installable package - something we really need for *Micro*Python.
The logic appears to be that (at least beginning of) sys.versions is the
version of reference Python language implemented, not version of particular
implementation.
Also, bump set versions at 3.4.0, based on @dpgeorge preference.
Attempt to address issue #386. unique_code_id's have been removed and
replaced with a pointer to the "raw code" information. This pointer is
stored in the actual byte code (aligned, so the GC can trace it), so
that raw code (ie byte code, native code and inline assembler) is kept
only for as long as it is needed. In memory it's now like a tree: the
outer module's byte code points directly to its children's raw code. So
when the outer code gets freed, if there are no remaining functions that
need the raw code, then the children's code gets freed as well.
This is pretty much like CPython does it, except that CPython stores
indexes in the byte code rather than machine pointers. These indices
index the per-function constant table in order to find the relevant
code.
Improved the Thumb assembler back end. Added many more Thumb
instructions to the inline assembler. Improved parsing of assembler
instructions and arguments. Assembler functions can now be passed the
address of any object that supports the buffer protocol (to get the
address of the buffer). Added an example of how to sum numbers from
an array in assembler.
This is necessary to catch all cases where locals are referenced before
assignment. We still keep the _0, _1, _2 versions of LOAD_FAST to help
reduced the byte code size in RAM.
Addresses issue #457.
I'm pretty sure these are never reached, since NOT_EQUAL is always
converted into EQUAL in mp_binary_op. No one should call
type.binary_op directly, they should always go through mp_binary_op
(or mp_obj_is_equal).
Per https://docs.python.org/3.3/reference/import.html , this is the way to
tell module from package: "Specifically, any module that contains a __path__
attribute is considered a package." And it for sure will be needed to
implement relative imports.
This simplifies the compiler a little, since now it can do 1 pass over
a function declaration, to determine default arguments. I would have
done this originally, but CPython 3.3 somehow had the default keyword
args compiled before the default position args (even though they appear
in the other order in the text of the script), and I thought it was
important to have the same order of execution when evaluating default
arguments. CPython 3.4 has changed the order to the more obvious one,
so we can also change.
It has (again) a fast path for ints, and a simplified "slow" path for
everything else.
Also simplify the way str indexing is done (now matches tuple and list).
A specific target can define either MP_ENDIANNESS_LITTLE or MP_ENDIANNESS_BIG
to 1. Default is MP_ENDIANNESS_LITTLE.
TODO: Autodetect based on compiler predefined macros?
Working towards trying to support compile-time constants (see discussion
in issue #227), this patch allows the compiler to look inside arbitrary
uPy objects at compile time. The objects to search are given by the
macro MICROPY_EXTRA_CONSTANTS (so they must be constant/ROM objects),
and the constant folding occures on forms base.attr (both base and attr
must be id's).
It works, but it breaks strict CPython compatibility, since the lookup
will succeed even without importing the namespace.
