af24c8ae06
Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic
...
Conflict in locale/circuitpython.pot resolved with 'make translate'
2020-09-13 14:21:21 -05:00
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode
...
Add esp32s2 safe mode support & fix user_safe_mode output
2020-09-13 14:18:59 -05:00
90f7340bfc
move implicit-fallthrough warning enable to defns.mk
2020-09-13 13:13:09 -05:00
36da92075b
Update safe mode reason
2020-09-13 22:57:24 +05:30
5deac8d249
Update board specific safe mode message
2020-09-13 18:22:40 +05:30
2fac4851a5
fix typo, tested hardware, neopixel doesnt work tho
2020-09-12 19:56:13 -04:00
6fff4ec00d
cutie variant
2020-09-12 19:00:26 -04:00
01fdd9598a
disable iimplicit-fallthrough warning inside asf4
...
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes) I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
2020-09-12 17:48:42 -05:00
5729097bc4
atmel-samd: enable build error for implicit fallthrough
...
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate. I only tested a few builds (trinket m0
and metro m4 express)
2020-09-12 15:11:29 -05:00
cacb0124ac
feather_m4_express: Use quad data mode on flash
...
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.
Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
2529ee2359
freeze rfm69 and bus_device libraries int feather_m0_rfm69
2020-09-09 14:54:20 -04:00
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c
...
fix pins for trellis_m4 board.I2C()
2020-09-04 11:15:18 -04:00
960888a3bd
fix pins for trellis_m4 board.I2C()
2020-09-03 14:22:18 -04:00
786f4ed114
Merge pull request #3344 from jepler/issue-3184
...
Fix RGBMatrix, FrameBufferDisplay bugs
2020-09-02 15:32:30 -07:00
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci
...
_bleio HCI implementation
2020-09-01 11:28:05 -07:00
952d9bbb4a
samd: Ignore a maybe-uninitialized diagnostic in asf4
...
I encountered this when changing optimization flags for debugging
purposes. The diagnostic appears spurious and unrelated to what
I'm debugging.
2020-09-01 10:55:45 -05:00
ad4bf75367
samd: only set NDEBUG for non-debug builds
2020-09-01 10:55:45 -05:00
4ac7650f22
matrix portal board
2020-08-31 23:56:38 -04:00
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
81870413af
add default I2C
2020-08-28 19:08:36 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
0cc438e6b9
Fix pycubed pwm use
2020-08-24 18:29:34 -07:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
58573a70e1
bring submodules up to date
2020-08-21 11:10:33 -04:00
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory
...
Update mini sam m4 memory
2020-08-20 19:05:39 -05:00
135626a038
Update mpconfigboard.mk
...
Added support for second type of memory chip.
2020-08-20 13:50:52 -05:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors
...
Add usb-endpoint-count checking
2020-08-20 11:21:01 -07:00
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family
...
SAM E54: Use correct CFG_TUSB_MCU
2020-08-20 11:13:05 -07:00
23aefe9509
Add usb-endpoint-count checking
...
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value. Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
2020-08-19 16:47:40 -05:00
6ae5bedf3b
SAM E54: Use correct CFG_TUSB_MCU
...
This doesn't actually change the code that is built, but it is
"more correct".
2020-08-19 11:27:52 -05:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
d01f5dc0bd
Turn off terminalio for ja and ko
...
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.
The serial output will work as usual.
2020-08-17 17:17:59 -07:00
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x
...
RFM9x -- freeze library into build
2020-08-17 17:11:35 -04:00
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50
...
The ja translation was not fitting.
2020-08-17 10:05:25 -04:00
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size
...
Squeeze firmwares to fit the new ja translation
2020-08-13 12:19:28 -04:00
239c8ff87f
metro_m0_express: put back audiobusio
...
this now fits locally (though it's very close to capacity);
let's see what the CI says.
```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
2020-08-12 19:11:33 -05:00
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2
...
Sharp Memory Display displayio support (v2)
2020-08-12 16:53:09 -07:00
aa0b4f7045
cpx_display: Put back AUDIOBUSIO, take away ROTARYIO
...
AUDIOBUSIO is needed for the on-board mic using PDMIn
2020-08-12 16:17:48 -05:00
ea8e9b8cef
metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO
...
Dan notes that this is more frequently the solution we've chosen
2020-08-12 16:17:13 -05:00
299894025a
stringcar_m0_express: make ja translation fit
2020-08-12 13:47:10 -05:00
f08ee0db20
itsybitsy_m0_express: make ja translation fit again
2020-08-12 13:44:00 -05:00
7bd42244c9
snekboard: make ja translation fit
2020-08-12 13:34:36 -05:00
45f6bc1f3e
serpente: make ja translation fit
2020-08-12 13:32:08 -05:00
Jeff Epler
Jeff Epler
microDev
lady ada
Scott Shawcroft
Jerry Needell
root
Dan Halbert
Dan Halbert
Lucian Copeland
Scott Shawcroft
Benjamin Shockley
Brent Rubell