b78e9fcd19
Improve STM reset reason
...
This causes safe mode to skip the wait for reset when waking up
from an alarm. (It also means we don't flash the LED for it.)
2021-05-19 11:48:02 -07:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
4c5e7520f5
Fix NVM by clearing FLASH_FLAG_PGPERR
2020-11-23 00:25:41 -08:00
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
381889f6bc
Cleanup
2020-11-22 01:19:28 -08:00
0b858440b0
Fix formatting.
2020-11-22 01:15:05 -08:00
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
5f0a372a22
Merge tag '6.0.0' into thunderpack1.2
2020-11-17 00:02:24 -08:00
119e9d3820
Add Thunderpack 1.2
2020-11-16 23:50:00 -08:00
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
c1f731d62e
Claim USB pins at startup to prevent overwrites
2020-07-22 14:22:05 -04:00
138189bad1
Free timers when modules de-init
2020-07-22 13:58:57 -04:00
2bcc5c06c2
Fix advanced claimed pin/package timer search
2020-07-09 11:42:37 -04:00
f67b307371
Merge pull request #3045 from k0d/stm32_alignment_issue
...
Fixes issue with memory alignment in STM32
2020-06-23 10:54:08 -07:00
8a760b0657
stm: Pin.c: Compute GPIO_PORT_COUNT instead of specifying manually
2020-06-22 10:45:27 -05:00
23da0fa99c
Fixes issue with memory alignment in STM32
...
When compiling with optimizations on, an issue occurs where the claimed_pins/never_reset_pins memory location is shared with another variable. This causes some bad memory read, so the USB pins ended up being reset. Setting these to have an alignment of 4 bytes resolves this.
Tested on nucleo_f746zg
2020-06-18 00:51:04 +02:00
fd4aafacbe
Add port D to LQFP64
2020-06-16 12:33:15 -04:00
c3b3eb4c21
Merge pull request #2831 from jepler/rgbmatrix-stm
...
stm: enable RGBMatrix
2020-05-06 08:35:25 -07:00
e5be728c1c
stm: enable protomatter
...
Testing performed: on stm32f405 feather, all pins change in plausible ways
on a logic probe. Didn't actually drive a display yet.
2020-04-30 08:58:58 -05:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
91fbbcab19
adds support for the stm32f746g_disco board
2020-04-24 16:43:39 +02:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
348df4be2b
Merge remote-tracking branch 'upstream/master' into stm32x7-setup
2020-03-26 18:16:11 -04:00
c4db8b87e2
Add F7 and H7 Support to the STM32 port
...
Restructures the STM port of Circuitpython to be more generic about the STM32 chip lines to support
the F7 and H7 series of chips. Adds the new Packages directory to organize different chip layouts
between lines. Makes general changes to the Makefile to condense board-level flags to the minimum
and support the new chip series. Adds the new chip line to the Peripherals directory, along with
new python tools used to generate peripheral text automatically in the tools/ directory.
2020-03-26 18:01:17 -04:00
653b7619ec
Add back microsecond delay to STM32
2020-03-23 16:09:50 -07:00
a79ac35173
Rename NVM_BYTEARRAY_BUFFER_SIZE
2020-03-22 15:20:58 -07:00
68195a8dfe
Update NVM_BYTEARRAY_BUFFER_LEN
2020-03-22 15:19:53 -07:00
d76b76cb1d
Add non-volatile memory support to STM
2020-03-22 02:22:59 -07:00
2623022c84
Initial work for STM32. Need to fix us delay and PulseIn still.
2020-03-20 12:58:34 -07:00
53b1544f41
create copy
2020-03-11 18:13:06 -04:00
Scott Shawcroft
microDev
Dan Halbert
jgillick
root
Lucian Copeland
Scott Shawcroft
Jeff Epler
Mark Olsson
Mark Olsson