abdbbf9e24
One grep
2020-09-28 15:10:12 -07:00
128b4a013b
Add non-calibrated ADC
2020-09-28 12:11:08 -04:00
96323ac3ac
Default power on Wio Terminal's 40 Pin
2020-09-27 10:21:25 +08:00
b9968ea801
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-09-26 13:37:14 -07:00
791d20f16c
give qtpy haxpress its own USB PID
2020-09-26 11:45:53 -05:00
9944935fde
qtpy haxpress: enable RTC
2020-09-26 11:33:10 -05:00
22a7696fac
Changes take 2: missed ugame10 board
2020-09-25 22:17:59 -04:00
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
eadb4de144
qtpy_m0_haxpress: add
2020-09-24 16:58:24 -05:00
dd86cb00ad
Merge pull request #3448 from hierophect/esp32-sd-fix
...
ESP32S2 - Fix SPI's SD card issue, add pin protections
2020-09-23 12:30:01 -07:00
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0
...
fix pins for rev C
2020-09-23 11:31:28 -07:00
00517b2600
Move missing pin warning to shared-bindings
2020-09-23 11:39:39 -04:00
9db7625717
neopix is default on!
2020-09-23 11:19:01 -04:00
5384479a61
fix pins for rev C
2020-09-22 23:28:23 -04:00
98185e914b
Merge pull request #3425 from jepler/canbus
...
canio: Initial implementation for SAM E5x MCUs
2020-09-22 12:39:52 -07:00
59580d0f2d
canio: Fix implementation bugs in atmel-sam
2020-09-22 09:36:29 -05:00
add230b4da
Update port.c
2020-09-22 11:37:12 +05:30
a77966a736
Try to reuse/share existing objects
2020-09-21 21:36:46 -07:00
2fa269ccbc
Additional error handling
2020-09-21 20:56:03 -07:00
4869dbdc67
canio: rename from _canio
...
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
9e8f1820c8
canio.CAN: switch rx/tx, make both mandatory, move declarations around
2020-09-21 16:44:26 -05:00
4e4853dcb2
common.template.ld: remove unneeded line
2020-09-21 16:44:26 -05:00
df379b84cb
remove unneeded symbols
2020-09-21 16:44:26 -05:00
7fd6cab2ac
canio: Make both tx and rx (but not both) optional
...
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification
.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
09f8a83a75
samd: template.ld: put canram in its own output section
2020-09-21 16:44:26 -05:00
a76119afcb
add _canio to Feather M4 CAN
2020-09-21 16:44:26 -05:00
67d8f108bb
Add CAN to SAM E51 clock config
2020-09-21 16:44:26 -05:00
44c5b2bbb1
Respond to review comments
...
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
58b920ed97
fix whitespace
2020-09-21 16:44:26 -05:00
27cbb690e5
_canio: Add listener matching
...
Lightly tested:
* no matches (catch-all)
* standard address single address matches (even and odd positions)
* standard address mask matches
* only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
635fcadb59
_canio.CAN: add error handling & bus state
2020-09-21 16:44:26 -05:00
a2e1867f69
_canio: Minimal implementation for SAM E5x MCUs
...
Tested & working:
* Send standard packets
* Receive standard packets (1 FIFO, no filter)
Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.
Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
183649aad8
samd: move mcu_find_pin_function to header
...
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
22d9a94f2b
Use write_value, add missing pin exceptions
2020-09-21 13:47:14 -04:00
c963771b4b
Merge pull request #3445 from microDev1/boardInfo
...
Update microS2 config files
2020-09-21 10:33:38 -07:00
40ec7a66e4
Update microS2 config files
2020-09-21 14:39:31 +05:30
ce266425e1
Merge pull request #3441 from hierophect/stm32-rgbmatrix-crashfix
...
STM32: Add never_reset reservation to RGBMatrix init
2020-09-20 07:51:09 -05:00
bc8863a3c7
Simplify now that I have it working
...
still need to figure out the bound method business
2020-09-19 21:04:07 -07:00
04ffd0dca0
Add gateway, subnet, and rssi info for current connected AP
...
ap_rssi is a bound method, which I'm not keen on, but it works
2020-09-19 13:38:04 -07:00
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21
...
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
2020-09-19 13:41:21 -04:00
b28b31196d
Merge pull request #3438 from nitz/patch-1
...
[Makerdiary nRF52840 M.2 Devkit] Add SDA & SDL, RX & TX to pins.c
2020-09-18 21:51:22 -04:00
dfd09bba57
Merge pull request #3433 from astrobokonon/esp32s2-bssid
...
ESP32S2: Allow connecting to specific bssid
2020-09-18 21:31:15 -04:00
8cf0171c06
Merge pull request #3431 from hierophect/stm32-spi-writevalue
...
STM32: Change SPI Read to acknowledge write_value
2020-09-18 19:46:21 -04:00
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
...
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
...
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
8d6a28a9ff
Update user button names.
2020-09-18 17:01:44 -04:00
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
...
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
5249a228a0
More pin names cleanup.
2020-09-18 14:27:00 -04:00
3a59d30e1a
Remove timer debug messages
2020-09-18 12:48:15 -04:00
c58bd4c047
Add never_reset reservation to RGBMatrix init
2020-09-18 12:38:15 -04:00
db078922e4
Removed TXD/RXD, fixed whitespace.
2020-09-17 21:32:19 -04:00
be3e478fce
Add SDA & SDL, RX & TX to pins.c
...
Despite the [silk on the dock board](https://wiki.makerdiary.com/nrf52840-m2-devkit/resources/nrf52840_m2_devkit_hw_diagram_v1_0.pdf ), the SDA/SCL pins weren't defined. Though, they were already defined in `mpconfigboard.h`.
Same for RX/TX. It looks like it declared `TXD` and `RXD`, so I didn't want to remove those, but I think it makes sense to have the "standard" pin names, but I moved ithem to illustrate they were all referencing the same pins.
I mimicked the whitespace I saw in the metro_nrf52840_express port.
2020-09-17 20:46:59 -04:00
45eec5b5a5
samd: SPI: improve conditional code
...
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4. However, the problem was in our SPI code.
A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.
Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.
Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.
Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
c73182803d
sdioio: fix code for the case where there is no SDHC1
...
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
1b29ceaf1a
sam e54: disable microcontroller.cpu.voltage
...
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
17bdc969db
Reorganize sdkconfigs and release UF2s
2020-09-17 16:01:23 -07:00
1805e92038
Add else case for non-bssid usage
2020-09-17 15:04:27 -07:00
7f60ebd6c7
Merge pull request #3426 from tannewt/esp_flash_sizes
...
Add partition layouts for 8 and 16 MB as well.
2020-09-17 13:27:58 -07:00
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
...
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
9cf9441ba6
Merge pull request #3393 from tannewt/fix_spi_psram
...
Add non-DMA SPI support.
2020-09-17 11:11:56 -07:00
78338ac12b
Merge pull request #3417 from hierophect/esp32s2-readme
...
ESP32S2: Add Readme
2020-09-17 10:58:17 -07:00
1e3241ec6d
Merge branch 'main' into esp32s2-bssid
2020-09-16 17:15:01 -07:00
daa1dd278d
connect now accepts bssid
2020-09-16 16:25:17 -07:00
81ee874531
pins.c: fix trailing whitespace
2020-09-16 16:40:04 -04:00
847d609ddc
rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately
2020-09-16 16:27:24 -04:00
c55deb54f0
Merge pull request #3427 from usini/muselab_nanoesp32_s2
...
Added board - Muselab nanoESP32-S2
2020-09-16 12:23:41 -07:00
00ee94d24b
Add SPI memset, optional flags
2020-09-16 14:22:18 -04:00
fb90daa0ff
Merge pull request #3422 from askpatrickw/rtc-support
...
RTC enabled
2020-09-16 11:12:00 -07:00
18285f96e8
RTC is pickd up automatically
2020-09-16 10:13:07 -07:00
d774678a0f
Merge pull request #3369 from kamtom480/camera
...
Add camera module
2020-09-16 12:29:58 -04:00
478a4b6405
Clarify location of port root
2020-09-16 10:51:08 -04:00
1fc797132a
Merge pull request #3237 from DavePutz/issue3216
...
Issue#3216 - Needed an alternate way to check if background tasks were run
2020-09-16 08:47:33 -05:00
61687c81d8
camera: Pass width and height to take_picture()
2020-09-16 13:55:57 +02:00
c06aeda399
Add Muselab nanoesp32 s2 definition
2020-09-16 13:10:01 +02:00
fead60d2d8
Add BSSID to Network
2020-09-15 23:32:53 -07:00
2bd169ec32
Add partition layouts for 8 and 16 MB as well.
2020-09-15 18:12:06 -07:00
95e27bb8bf
Add more PIDs for unique boards
2020-09-15 13:43:35 -07:00
bd381e434f
Revert "code review feedback"
...
This reverts commit f9f614b3a2
2020-09-15 13:02:26 -07:00
f9f614b3a2
code review feedback
2020-09-15 11:28:31 -07:00
8fcdc7da16
RTC enabled
2020-09-14 23:24:44 -07:00
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can
...
atmel-samd: add same51, feather_m4_can
2020-09-14 23:57:51 -04:00
067a975875
update submodules to merge commits
2020-09-14 17:22:30 -05:00
2a2a8d6457
Merge pull request #28 from adafruit/main
...
Merge from adafruit/main
2020-09-14 16:50:40 -05:00
3640ef2b7f
Fix toctree, incorrect flash port assumptions
2020-09-14 17:37:55 -04:00
6ecfdda580
Add Readme
2020-09-14 13:18:51 -04:00
2eca4ee902
Update PulseIn.c
2020-09-14 11:04:45 -05:00
e504438fd2
Remove unlicensed file, fix reset pin type check
2020-09-14 11:58:13 -04:00
c014ac3089
Reworked check for input taking too long
2020-09-14 10:54:57 -05:00
ecc219fe50
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-14 10:44:31 -04:00
ce7ee58e92
camera: Update camera module
2020-09-14 13:12:20 +02:00
c2fc592c2c
camera: Change API
2020-09-14 13:11:15 +02:00
143a1ff94a
spresense: change the GC to do 32-byte blocks
2020-09-14 13:11:15 +02:00
1fde8ef9bc
spresense: Add support for camera
2020-09-14 13:11:15 +02:00
b3bdd4686b
PacketBuffer: add missing 'break's, remove unneeded {}
2020-09-13 15:10:38 -05:00
af24c8ae06
Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic
...
Conflict in locale/circuitpython.pot resolved with 'make translate'
2020-09-13 14:21:21 -05:00
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode
...
Add esp32s2 safe mode support & fix user_safe_mode output
2020-09-13 14:18:59 -05:00
90f7340bfc
move implicit-fallthrough warning enable to defns.mk
2020-09-13 13:13:09 -05:00
36da92075b
Update safe mode reason
2020-09-13 22:57:24 +05:30
5deac8d249
Update board specific safe mode message
2020-09-13 18:22:40 +05:30
2fac4851a5
fix typo, tested hardware, neopixel doesnt work tho
2020-09-12 19:56:13 -04:00
6fff4ec00d
cutie variant
2020-09-12 19:00:26 -04:00
01fdd9598a
disable iimplicit-fallthrough warning inside asf4
...
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes) I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
2020-09-12 17:48:42 -05:00
5729097bc4
atmel-samd: enable build error for implicit fallthrough
...
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate. I only tested a few builds (trinket m0
and metro m4 express)
2020-09-12 15:11:29 -05:00
4da478382d
Fix serial console output & add more boards
2020-09-12 17:46:52 +05:30
305bed6d9e
Added esp32s2 safe_mode & fixed user_safe_mode
2020-09-11 21:06:54 +05:30
cacb0124ac
feather_m4_express: Use quad data mode on flash
...
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.
Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
c7c90f47b0
Add non-DMA SPI support.
...
This fixes SPI with PSRAM allocated buffers. DMA with SPI2 was
attempted but produced junk output. This manual copy is less than
2x slower than DMA when not interrupted.
Fixes #3339
2020-09-10 17:32:20 -07:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
e5dd2a32f4
Merge pull request #3388 from jerryneedell/jerryn_rfm69
...
freeze rfm69 and bus_device libraries into feather_m0_rfm69
2020-09-10 11:49:37 -07:00
683462c1b1
Merge pull request #3326 from tannewt/native_wifi
...
Add native wifi API with ESP32S2 support
2020-09-10 11:20:44 -07:00
2529ee2359
freeze rfm69 and bus_device libraries int feather_m0_rfm69
2020-09-09 14:54:20 -04:00
be199983c1
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-09 13:24:30 -04:00
99f5011d74
Fix heap without PSRAM. Never set heap_size.
2020-09-08 17:06:09 -07:00
b49099c8f3
additional asf4 updates
2020-09-08 15:31:13 -05:00
e066448e36
atmel-samd: add same51, feather_m4_can
...
This is compile-tested, and requires updates in the related submodules:
https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37
This should not be merged until those can also be merged.
2020-09-08 13:06:45 -05:00
14af8e4b42
Added temp_sensor_stop
...
Co-authored-by: hierophect <hierophect@gmail.com>
2020-09-08 21:07:00 +05:30
c68723db3c
Update Processor.c
2020-09-08 15:13:48 +05:30
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
ed6cc64c49
Corrected issue with BLE not working on nrf52840
2020-09-04 16:59:41 -05:00
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c
...
fix pins for trellis_m4 board.I2C()
2020-09-04 11:15:18 -04:00
96cf60fbbd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-09-03 16:34:56 -07:00
0b94638aeb
Changes based on Dan's feedback
2020-09-03 16:32:12 -07:00
960888a3bd
fix pins for trellis_m4 board.I2C()
2020-09-03 14:22:18 -04:00
786f4ed114
Merge pull request #3344 from jepler/issue-3184
...
Fix RGBMatrix, FrameBufferDisplay bugs
2020-09-02 15:32:30 -07:00
4733a67226
Add GDB debugging capability
2020-09-02 11:27:42 -04:00
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci
...
_bleio HCI implementation
2020-09-01 11:28:05 -07:00
952d9bbb4a
samd: Ignore a maybe-uninitialized diagnostic in asf4
...
I encountered this when changing optimization flags for debugging
purposes. The diagnostic appears spurious and unrelated to what
I'm debugging.
2020-09-01 10:55:45 -05:00
ad4bf75367
samd: only set NDEBUG for non-debug builds
2020-09-01 10:55:45 -05:00
4ac7650f22
matrix portal board
2020-08-31 23:56:38 -04:00
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
0adccc50dc
Merge pull request #3346 from tannewt/add_kaluga
...
Add Kaluga board definition
2020-08-29 21:05:20 -04:00
7b59ede25e
Add remaining pins
2020-08-28 18:22:22 -07:00
0bb5c6c07f
Add unique USB PID
2020-08-28 16:37:25 -07:00
81870413af
add default I2C
2020-08-28 19:08:36 -04:00
a09243472c
Add Kaluga board definition
2020-08-28 16:08:24 -07:00
893a125dd0
Merge pull request #3338 from jepler/endpoint-count-checking-stm32f405
...
add endpoint count checking on stm32f405
2020-08-28 11:12:31 -04:00
ac06202c21
Merge pull request #3238 from ElectronicCats/bastwifi
...
Add Bastwifi by Electronic Cats
2020-08-28 11:03:52 -04:00
5d8ac0428b
-Os espruino_pico to save space
2020-08-27 13:34:37 -07:00
563e038c0d
stm: Specify max endpoints for stm32f405xx
...
.. which is why we can't have HID or MIDI on the stm32f405 feather
2020-08-27 15:11:17 -05:00
2b71635c49
Fix esp-idf requirements
2020-08-27 11:45:51 -07:00
fd6e63d806
Hopefully final partition scheme.
2020-08-27 11:43:06 -07:00
767ca5c3dc
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-27 11:42:31 -07:00
49a22b0c55
Merge pull request #3320 from hierophect/stm32-meowbit-fix
...
STM32: Fix Meowbit startup and associated bugs
2020-08-27 13:05:56 -05:00
24fb08dbd9
Merge pull request #3337 from hierophect/pulseout-errorstyle
...
Fix problematic whitespace on pulseout parameter errors
2020-08-27 13:22:26 -04:00
350e88d4b9
Merge pull request #3324 from hierophect/esp32-random
...
Add random to ESP32-S2, fix it on STM32
2020-08-27 13:22:05 -04:00
6100027243
Merge pull request #3315 from tannewt/add_psram
...
Add PSRAM support to ESP32S2
2020-08-27 11:58:59 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
772052598d
Merge branch 'main' into stm32-meowbit-fix
2020-08-27 11:00:29 -04:00
a15f948a40
Merge branch 'main' into esp32-random
2020-08-27 10:49:14 -04:00
fe73cfb922
Merge pull request #3333 from hierophect/esp32-enable-ulab
...
Fix all assignments affected by inline makefile comments
2020-08-27 10:36:59 -04:00
8d2299e61e
Merge remote-tracking branch 'upstream/main' into stm32-meowbit-fix
2020-08-26 18:50:26 -04:00
c229345741
improve efficiency of stm32 random gen
2020-08-26 18:47:19 -04:00
553ac576eb
Disable ulab
2020-08-26 17:48:29 -04:00
c77523503b
Fix trailing whitespace errors across ports and docs
2020-08-26 14:48:46 -04:00
44342732a4
Fix DOS line endings, they give my git fits
2020-08-26 10:56:00 -05:00
5755160720
Merge pull request #3322 from microDev1/microS2
...
Added board - microS2
2020-08-26 11:03:46 -04:00
f26d15c5c9
Added PSRAM support
2020-08-26 18:39:30 +05:30
01ddb177fc
Remove whitespace in sdkconfig
2020-08-26 09:07:54 -04:00
f7d224705f
Trim trailing whitespace in pins.c
2020-08-26 09:01:27 -04:00
0425305a73
Change microS2 board name
2020-08-26 08:40:46 +05:30
b019ef2e43
Change microS2 board name
2020-08-26 08:38:42 +05:30
f1f316c502
Change microS2 board name
2020-08-26 08:37:36 +05:30
3f699024d9
Change microS2 board name
2020-08-26 08:36:38 +05:30
1dce6bd7ca
Change microS2 board name
2020-08-26 08:35:09 +05:30
bf2b594066
Change microS2 board name
2020-08-26 08:33:21 +05:30
8b71e26abd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-25 16:39:23 -07:00
380cbfba55
Add hash to Socket so it can be used in dicts
2020-08-25 16:15:45 -07:00
69fc872944
Fix espidf.MemoryError print
2020-08-25 16:14:31 -07:00
f71f6631cc
Enable ulab
2020-08-25 14:24:35 -04:00
05bde255f7
Add random to ESP32-S2, fix it on STM32
2020-08-25 14:00:29 -04:00
89c6a44e4e
Added microS2 specific config files
2020-08-25 20:35:08 +05:30
645adaadb0
Added microS2 specific config files
2020-08-25 20:32:44 +05:30
de9fd4a0fb
Fix null dereference, invert auto_brightness to reenable screen
2020-08-25 10:37:55 -04:00
0cc438e6b9
Fix pycubed pwm use
2020-08-24 18:29:34 -07:00
1527a3ce92
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-24 18:25:18 -07:00
c137a16121
Remove Meowbit LSE flag, harsher failure for LSE issues
2020-08-24 14:49:06 -04:00
3eea3b5311
Added microS2 specific config files
2020-08-24 11:12:35 +05:30
fe0f79adce
Making requested modifications
2020-08-21 20:38:19 -05:00
f39708abb2
Add PSRAM support to ESP32S2
...
When configured the CircuitPython heap will be on the external RAM.
When not available, the heap will be 48k inside the IDF heap.
2020-08-21 16:20:58 -07:00
da61845f56
Add missing include
2020-08-21 13:32:59 -07:00
644d2ba7a2
Add more "extern" declarations for gcc10 compat
...
gcc has tightened the restrictions on forward declarations that lack
"extern". Fix them up.
2020-08-21 14:39:37 -05:00
83deea0e03
Fix copy pasta and stub build
2020-08-21 11:17:42 -07:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
701e80a025
Make socket reads interruptable
2020-08-21 11:00:02 -07:00
58573a70e1
bring submodules up to date
2020-08-21 11:10:33 -04:00
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory
...
Update mini sam m4 memory
2020-08-20 19:05:39 -05:00
6eae7ce78f
Requested changes to pulsein
2020-08-20 16:57:00 -05:00
135626a038
Update mpconfigboard.mk
...
Added support for second type of memory chip.
2020-08-20 13:50:52 -05:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
e47447ba59
Merge pull request #3306 from kamtom480/usb_fix
...
spresense: call usb_background function
2020-08-20 11:23:16 -07:00
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors
...
Add usb-endpoint-count checking
2020-08-20 11:21:01 -07:00
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family
...
SAM E54: Use correct CFG_TUSB_MCU
2020-08-20 11:13:05 -07:00
e2891bc7d4
spresense: call usb_background function
2020-08-20 16:21:25 +02:00
80b15f6b3b
Add error handling w/temp debug logs
2020-08-19 17:51:33 -07:00
23aefe9509
Add usb-endpoint-count checking
...
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value. Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
2020-08-19 16:47:40 -05:00
eb8b42aff1
Add basic error handling
2020-08-19 14:23:28 -07:00
9602ee6265
Disable wifi debug logging and memory log
2020-08-19 14:23:28 -07:00
dcc42f6281
Remove debug prints
2020-08-19 14:23:28 -07:00
Scott Shawcroft
Lucian Copeland
Anson He
Ryan T. Hamilton
Jeff Epler
Mark Roberts
Scott Shawcroft
lady ada
microDev
Jeff Epler
Dan Halbert
nitz
Ryan T. Hamilton
Brian Dean
askpatricw
Kamil Tomaszewski
Rémi Sarrailh
DavePutz
Jerry Needell
root
Dan Halbert
Jeff Epler
Benjamin Shockley