Dan Halbert
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
ZodiusInfuser
f707fa107a
Tweaks to Interstate75 pinout
2021-08-05 15:00:47 +01:00
ZodiusInfuser
11ed759cf9
Tweaks to Plasma2040 pinout
2021-08-05 13:01:50 +01:00
Jeff Epler
ac4b10bcd9
It's "shared-module", not "shared-modules"
2021-08-03 10:37:47 -05:00
ZodiusInfuser
6663dacedb
Added board configurations for Plasma and Interstate
2021-08-03 14:01:56 +01:00
Dan Halbert
a358e5f58a
Add board-specific pico-sdk settings; set xosc multipler for Adafruit boards
2021-07-30 18:50:21 -04:00
Scott Shawcroft
9e54606ba1
Set output low in SIO
2021-07-28 09:00:36 -07:00
Scott Shawcroft
4be904fd4a
Switch to gpio mux to disable/enable pwm signal
2021-07-27 12:38:18 -07:00
Scott Shawcroft
e87e1d8175
Block when setting duty_cycle until the new value is taken
2021-07-27 12:37:35 -07:00
Scott Shawcroft
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch
2021-07-26 18:48:59 -07:00
Scott Shawcroft
412eb87080
Switch to pin, frequency and duty_cycle PulseOut
...
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0
This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.
Most of the way for #3264
Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
Tod Kurt
0d401e7bc8
fix whitespace on new flash chip for Arduino Nano RP2040
2021-07-24 13:22:02 -07:00
Tod Kurt
dcd5b5ab50
added Arduino Nano RP2040 Connect alternate flash chip
2021-07-24 13:12:44 -07:00
Nathan Young
04ce6a6e8c
Check jmp_pin specified when JMP PIN opcodes used
2021-07-23 13:35:20 +02:00
Nathan Young
8221a12cf6
Added support for specifying the JMP pin (RP2 PIO)
2021-07-22 18:39:04 +02:00
Scott Shawcroft
109bd2886b
Fix Arduino RP2040 flash size
...
For RP2040 boards, we now change the default flash size based on
the configured flash. We will still try to read the size from the
flash first.
Fixes #4874
2021-07-21 11:02:55 -07:00
Scott Shawcroft
8723a0335f
Merge pull request #5032 from DavePutz/multi_pulseout
...
Moved global variables to support multiple RP2040 PulseOuts
2021-07-21 10:26:17 -07:00
Scott Shawcroft
e14923028f
Merge pull request #5030 from dhalbert/update-to-raspberrypi-pico-sdk-1.2.0
...
Update pico-sdk to 1.2.0, using raspberrypi repo
2021-07-21 08:14:13 -07:00
root
b2d6203c63
fix formatting
2021-07-21 10:05:09 -05:00
root
0559fcd1c0
Moved global variables to support multiple PulseOuts
2021-07-21 09:52:17 -05:00
Scott Shawcroft
db0adf1253
Merge pull request #5025 from DavePutz/issue_5016
...
Turn off PWM pin during PulseOut construct
2021-07-20 17:25:10 -07:00
root
8fe4fa0114
Turn off PWN pin during PulseOut construct
2021-07-20 17:17:41 -05:00
Dan Halbert
0293ec261a
Update pico-sdk to 1.2.0, using raspberrypi repo
2021-07-20 17:31:29 -04:00
Dan Halbert
128bedae7e
Merge pull request #5019 from DavePutz/issue_5016
...
Ensure RP2040 pin is left low after PulseOut
2021-07-19 17:57:42 -04:00
Dan Halbert
d2f2afe57b
Merge pull request #4925 from microDev1/update-run-mode
...
Add RunMode.UF2 and update esp32s2 run-modes
2021-07-19 16:37:46 -04:00
root
8d79d4e5ee
Ensure pin is left low after PulseOut
2021-07-19 11:46:09 -05:00
microDev
3c25d8e2a0
Merge pull request #5013 from DavePutz/issue_5012
...
Issue #5012 - RP2040 moved globals to PulseIn object to fix multiple instances
2021-07-19 00:21:55 +05:30
root
43275e0b0d
Made suggested changes (mostly)
2021-07-18 12:00:37 -05:00
microDev
9ac607dffa
update run-mode
...
- add microcontroller.RunMode.UF2
- add UF2, NORMAL and BOOTLOADER run-modes to esp32s2
2021-07-18 00:00:58 +05:30
root
1c80696746
iFix formatting
2021-07-16 17:18:06 -05:00
root
588a19a1ab
Issue #5012 - Moved globals to PulseIn object to fix multiple instances
2021-07-16 15:59:08 -05:00
Scott Shawcroft
bba611336c
Merge pull request #4964 from DavePutz/issue_4937
...
Fix for issue #4937 - Implement minimum PulseOut time
2021-07-16 11:29:32 -07:00
root
eebddbb16d
Change min pulse calculation
2021-07-15 21:27:23 -05:00
Scott Shawcroft
c2685970af
Merge pull request #4987 from DavePutz/issue_4983
...
Fix for Issue #4983 - stop state machine before restarting
2021-07-13 12:16:33 -07:00
root
5c9823d8cb
Change order of operations in restart
2021-07-13 11:17:03 -05:00
root
490f263a41
Added code to reset SM program counter during a restart
2021-07-12 14:09:11 -05:00
root
9d5fbea7a3
Fix for Issue #4983 - stop state machine before restarting
2021-07-11 21:02:28 -05:00
root
0ea750b2d0
Fix handling of short pulses
2021-07-11 16:38:24 -05:00
DavePutz
25e799e51a
Add LED and GP25 for Cytron Maker Pi Pico
2021-07-09 20:49:59 -05:00
Scott Shawcroft
58fdf9e940
Merge pull request #4975 from DavePutz/issue_4945
...
Issue #4945 - handle multiple PulseIns
2021-07-09 11:03:16 -07:00
root
4046b0fb0a
Issue #4945 - handle multiple PulseIns
2021-07-08 14:09:21 -05:00
Dan Halbert
ab52a92704
Disallow ctrl-C interrupts of RP2040 SPI and PIO
2021-07-08 13:42:24 -04:00
Dan Halbert
a843b8a0d4
Merge remote-tracking branch 'adafruit/main' into rp2040-audio-and-spi-fixes
2021-07-08 08:22:21 -04:00
Dan Halbert
bd6826496c
Fix various RP2040 audio dma things: (see detailed commit message)
...
1. Check for correct error values from dma_claim_unused_channel.
2. Introduce a .stereo flag for simplicity.
3. Clarify PWM carrier frequency choice.
4. Start introducing quiescent audio value. Still need to ramp up/down.
5. Redo audio stop logic a bit.
6. Fix (unrelated) displayio dependency things.
There is still an interference problem between other DMA users and audio. Still debugging this.
2021-07-08 08:14:49 -04:00
root
f98ec0cfd6
Fix formatting
2021-07-06 14:43:46 -05:00
root
bfa777c55a
Add check for timer success
2021-07-06 14:34:15 -05:00
Daniel Griswold
2519b06478
fix spi definition
2021-07-06 01:15:32 -04:00
root
b2e72b2912
fix formatting
2021-07-05 23:13:18 -05:00
root
6e4613f1a1
Fix formatting
2021-07-05 12:30:26 -05:00
root
9814386d2e
Fix for issue #4937 - Implement minimum pulseout time
2021-07-05 11:38:05 -05:00
Dan Halbert
33bbb8b1f4
RP2040 PWMAudioOut: Release DMA channels after play has finished.
2021-07-01 17:36:29 -04:00
Radomir Dopieralski
b8c4f7d685
MacroPad RP2040: Add initialization for the OLED display
2021-06-29 17:38:14 +02:00
Kattni Rembor
2c2d541e7c
Adding pins to match silk and other RP2040 boards.
2021-06-28 17:10:15 -04:00
Scott Shawcroft
061d3a16ff
Merge pull request #4911 from DavePutz/issue_4908
...
Fix for issue #4908 - pulseout leaving line high
2021-06-24 15:32:48 -07:00
Dan Halbert
836db4e4a1
Merge pull request #4816 from hierophect/rp2040-alarms
...
RP2040: add Alarm module
2021-06-24 08:15:57 -04:00
root
ab1d7429f1
Fix for issue #4908 - pulseout leaving line high
2021-06-23 21:09:27 -05:00
Lucian Copeland
1f3d69d87c
Clean up sleep memory, mark as not-implemented
2021-06-20 17:57:51 -04:00
Jeff Epler
268717e427
ParallelImageCapture: Switch to taking a list of pins
...
.. adopting validate_pins from RGBMatrix into shared-bindings
.. updating other platforms for API change
2021-06-10 11:15:18 -05:00
Ben Clifford
5c835adb10
Correct pull-down direction in parameter documentation for rp2pio
2021-06-09 20:39:56 +00:00
Limor "Ladyada" Fried
c1c101ca2d
Merge pull request #4864 from ladyada/main
...
macropad rev B definion and fix for SH110x addressing
2021-06-07 21:59:56 -04:00
Lucian Copeland
b6a268fca4
Further deinit additions
2021-06-07 14:13:59 -04:00
Lucian Copeland
63c1791d87
Merge remote-tracking branch 'upstream/main' into rp2040-alarms
2021-06-07 14:11:41 -04:00
Lucian Copeland
f2149edbd2
Add deinit to new boards
2021-06-07 12:48:12 -04:00
lady ada
2ff9e9766f
handclang
2021-06-07 12:39:59 -04:00
Limor "Ladyada" Fried
c4f685aab1
Merge pull request #4865 from ZodiusInfuser/pimoroni_boards
...
Added definition for upcoming Pimoroni RP2040 board
2021-06-07 11:13:01 -04:00
lady ada
3890271f19
turn off all neopix when booting
2021-06-06 18:30:17 -04:00
lady ada
01195c2089
update to rev B
2021-06-06 15:57:41 -04:00
Scott Shawcroft
bc014cecb5
Merge pull request #4859 from DavePutz/hcsr04_fix
...
Fix pulsein pause and resume functions to handle HCSR04
2021-06-04 13:26:05 -07:00
root
57334c812e
Fix pulsein pause and resume functions to handle HCSR04
2021-06-04 12:10:41 -05:00
ZodiusInfuser
af7557b53b
Updated with final USB PID
2021-06-04 16:02:32 +01:00
Jeff Epler
a99eba35b8
Merge pull request #4809 from DavePutz/issue_4266
...
Fix for Issue #4266 - second PWMAudioOut interferes with the first one
2021-06-03 19:08:28 -05:00
ZodiusInfuser
6011db3aec
Added board definition
2021-06-03 15:49:23 +01:00
Dan Halbert
6af36757a7
lengthen RP2040 xosc startup time
2021-06-02 08:50:20 -04:00
root
8761e4bfd7
Initialize pacing timer
2021-05-30 12:12:38 -05:00
Kong Wai Weng
b06ec0a776
Added libraries dependency.
2021-05-30 09:57:00 +08:00
root
a2b220370e
Fix formatting issue
2021-05-29 12:26:41 -05:00
root
760e8c77bd
Changes to correct repeat playing on a channel
2021-05-29 11:55:10 -05:00
Kong Wai Weng
ebe4d90ac3
Updated the copyright information.
2021-05-29 10:12:22 +08:00
Lucian Copeland
feff243e8f
Add RTC deep sleep alarm support
2021-05-28 13:52:05 -04:00
Kong Wai Weng
ebda9e07f4
Use 4 spaces instead of tab.
2021-05-29 01:04:13 +08:00
Kong Wai Weng
bfcb8c5896
Do not use neopixel as status LED. Also removed the unused definition.
2021-05-29 00:47:14 +08:00
Kong Wai Weng
5920ac647a
Modified the essential files for Maker Pi RP2040.
2021-05-28 22:42:54 +08:00
Kong Wai Weng
321e5dd16f
Use underscore instead of dash for board name.
2021-05-28 18:01:02 +08:00
Lucian Copeland
24041f34b0
Merge remote-tracking branch 'upstream/main' into rp2040-alarms
2021-05-27 18:40:40 -04:00
Lucian Copeland
8e1892ac6f
Implement RP2040 Alarm module
...
Adds light and deep sleep functionality for the TimeAlarm and PinAlarm
alarm categories. Adds board deinit for all platforms.
2021-05-27 18:33:29 -04:00
Kong Wai Weng
da7c74f614
Initial commit.
2021-05-27 18:02:52 +08:00
root
24e641a834
Fix for Issue #4266
2021-05-25 16:06:00 -05:00
Scott Shawcroft
038c9d6194
Merge pull request #4796 from Neradoc/nera-pwmrgb-status-pimoroni
...
Enable the PWM status LED on Pimoroni Tiny 2040 and PicoSystem
2021-05-24 13:30:55 -07:00
lady ada
2e90d5ed07
clang a bit
2021-05-22 12:39:42 -04:00
lady ada
d52f149e84
add ESP CS pin to make wifi demos easier
2021-05-22 12:22:28 -04:00
lady ada
ac855afb48
Some pin neatening and updated PID to unused Adafruit one!
2021-05-22 11:57:46 -04:00
BlitzCityDIY
14dbec7c04
Merge branch 'main' of https://github.com/blitzcitydiy/circuitpython into main
2021-05-22 01:02:21 -04:00
BlitzCityDIY
9f4eb48e70
Updating MISO
...
While testing WIFI realized MISO was defined incorrectly
2021-05-22 01:02:06 -04:00
BlitzCityDIY
352281e23e
Adding Arduino Nano RP2040 Connect
...
Re-commiting to fix local GitHub config issues. Adding CircuitPython support for the Arduino Nano RP2040 Connect. Have tested all digital and analog I/O, I2C, onboard LSM6DSOX. Uses the AT25SF128A external flash.
2021-05-21 20:44:11 -04:00
Neradoc
6808d04d53
enable the PWM status LED on Pimonoroni Tiny 2040 and PicoSystem
2021-05-21 20:13:30 +02:00
Scott Shawcroft
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
Scott Shawcroft
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
Scott Shawcroft
9dabe882f1
Fix safe mode on rp2040
2021-05-19 10:18:43 -07:00
Limor "Ladyada" Fried
b667736110
Merge branch 'adafruit:main' into main
2021-05-18 20:55:55 -04:00
lady ada
d8b895f1d7
add LED and speaker - natch!
2021-05-18 20:53:13 -04:00
