Commit Graph

475 Commits

Author SHA1 Message Date
Scott Shawcroft
5c72828997
Merge pull request #7760 from Neradoc/01space-042-oled-c3
Adding 01space OLED 0.42 C3
2023-03-23 10:14:48 -07:00
Neradoc
b45d128726 fix lwip name in 01space_lcd042_esp32c3 2023-03-21 16:46:08 +01:00
Neradoc
36e4dc2588 Adding 01space OLED 0.42 C3 2023-03-21 05:01:17 +01:00
Scott Shawcroft
41a8ada327
Merge pull request #7750 from Neradoc/add-ttgo-tdisplay-esp32
Add Lilygo TTGO T-display ESP32 board
2023-03-20 14:40:16 -07:00
Scott Shawcroft
b75d99c5d7
Merge pull request #7745 from Neradoc/lilygo-twatch-v3-MAIN
Add Lilygo T-Watch 2020 V3 (ESP32)
2023-03-20 14:31:32 -07:00
Neradoc
b88e76d3a4 Add builtin display support with shared board.I2C to Lolin S2 Pico 2023-03-19 17:48:36 +01:00
Neradoc
e7c349ea43 Add Lilygo TTGO T-display ESP32 board 2023-03-18 15:27:59 +01:00
Neradoc
f1b7612b5a Add Lilygo T-Watch 2020 V3 (ESP32)
- DISPLAY is in, brightness is ok
- default busses and pin names
- enabled PSRAM
2023-03-18 01:17:46 +01:00
Matthias Kreier
f5b8b8d6f2
tailing whitespace removed (pre-commit run failed) 2023-03-13 15:30:52 +07:00
Matthias Kreier
49e9ea2e9a
add missing pins 4, 36 and 39 - and 4 aliases
The original list left D4 (GPIO4), VN (GPIO39) and VP (GPIO36) out.

Added aliases for 1, 3, 16 and 17 with their GPIO names, even though they won't be used as such since they are UART0 and UART2
2023-03-13 15:17:55 +07:00
MicroDev
7163ab390c
Merge pull request #7715 from bill88t/waveshare_esp32s2_pico
Even more board definition improvements for `waveshare_esp32s2_pico`
2023-03-12 07:46:42 +05:30
Bill Sideris
bfc551c158
Invert led 2023-03-11 14:14:47 +02:00
Bill Sideris
76e83a432c
Debug uart, default spi/i2c 2023-03-11 14:05:45 +02:00
MicroDev
5f0aa4a608
change board config of some esp32s3 boards
- remove unnecessary optimization flags
- shrink adafruit_feather_esp32s3_reverse_tft
2023-03-11 08:53:44 +05:30
BrainBoardz
0054362784
Updated Pin Assignments (Add SPI definition)
Changed incorrect i2C pins assignment in mpconfigboard.h (changed SDA/SCL to GPIO 8/GPIO 9. 
Rename  SD_MOSI, SD_MISO and SD_SCK to MOSI, MISO and SCK
Added SPI define in mpconfigboard.h for SPI
2023-03-09 10:26:54 -05:00
BrainBoardz
6da2ca6770
Update pins.c
Added a comma (,) to the the end of the definition for board_spi_obj
2023-03-08 16:46:31 -05:00
BrainBoardz
1200fe405f
Change GPIO pins for SDA and SCL
Chnage the SDA pin define to GPIO9 and SCL pin define to GPIO8. This now matches the currect GPIO pins numbers in pins.c
The previous GPIO pins number in mpconfigboard.h were incorrect
2023-03-08 16:38:16 -05:00
BrainBoardz
c133e79a08
Updated mpconfigboard.h
Add #defines for SPI_BUS_SCK, SPI_BUS_MOSI and SPI_BUS.MISO
2023-03-08 16:31:47 -05:00
BrainBoardz
7f8a3052be
Updated Pins.c definitions for SPI and I2C
Removed "CD" from the pin definitions for (MISO, MOSI and SCK pins). Specifically Pins 13, 15 and 14. Added Pin definitions for I2C and SPI objects
2023-03-08 16:25:18 -05:00
Scott Shawcroft
482ba05958
Merge pull request #7658 from titimoby/8.0.x.add_Lilygo_tembed
add support Lilygo T-embed esp32s3 board
2023-02-28 09:45:21 -08:00
Thierry Chantier
c6d38e4ba8 add support Lilygo T-embed esp32s3 board 2023-02-28 14:02:21 +00:00
MicroDev
26bab620f7
Merge pull request #7626 from bill88t/wspico-psram-speedup
Waveshare ESP32-S2 Pico psram definition improvements
2023-02-25 16:15:24 +05:30
Scott Shawcroft
f832386cda
Merge remote-tracking branch 'adafruit/main' into banglejs2 2023-02-23 14:43:38 -08:00
Bill Sideris
1461e9448d
Merge branch 'adafruit:main' into wspico-psram-speedup 2023-02-22 20:30:54 +02:00
Dennis Field
d1f5004121 Add ESP32-LyraT board 2023-02-22 10:54:44 -05:00
Bill Sideris
1ea118684c
120M qspi 2023-02-22 00:49:55 +02:00
Scott Shawcroft
de5f58a61d
Merge branch 'main' into banglejs2 2023-02-21 12:04:28 -08:00
Dan Halbert
8ffa7b1d55 Add Adafruit HUZZAH32 breakout 2023-02-20 20:04:22 -05:00
Bill Sideris
a2c22521b4
Updates to waveshare-esp32s2-pico board definition 2023-02-17 15:16:18 +02:00
Scott Shawcroft
931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
  This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
  runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
  that safe mode messages show up on the display.

ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
  watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
  display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
  need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.

For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
  converted colors at each index.
* ColorConverter now caches the last converted color. It should make
  conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
Dan Halbert
d8231f1588 Implement safemode.py 2023-02-13 18:26:38 -05:00
Dan Halbert
9ab0733a28
Merge pull request #7530 from BrainBoardz/main
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
2023-01-31 23:33:34 -05:00
brainboardz
2656ccffe4 Commit01-31 2023-01-31 19:35:57 -05:00
Dan Halbert
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main
Update mpconfigboard.h  with LED definition for BPI-Bit-S2.
2023-01-31 16:08:10 -05:00
Scott Shawcroft
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3
seeed_xiao_esp32c3 flash mode change to dio
2023-01-31 11:29:24 -08:00
Jeff Epler
b8d6f20308
Add front buttons as D0/1/2, matching the silk 2023-01-31 10:02:21 -06:00
brainboardz
f3b1ceeb81 Seventh Commit 2023-01-30 20:45:57 -05:00
brainboardz
f71b4bc018 Sixth Commit 2023-01-30 20:32:19 -05:00
brainboardz
e10816f34c Fifth Commit 2023-01-30 20:20:37 -05:00
brainboardz
3f3519e0ab Fourth Commit 2023-01-30 20:10:34 -05:00
brainboardz
7c525fdcb0 Third Commit 2023-01-30 19:54:11 -05:00
brainboardz
34f480d735 Second Commit 2023-01-30 19:03:57 -05:00
brainboardz
d6ebf1bf43 First commit 2023-01-30 17:12:21 -05:00
Wind-stormger
6e31cd0a4f Update mpconfigboard.h 2023-01-30 15:41:42 +08:00
RetiredWizard
dc5cd27555 seeed_xiao_esp32c3 flash mode change to dio
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
2023-01-30 02:01:33 -05:00
MicroDev
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8
Espressif ESP32-S3 DevKitC-1-N32R8
2023-01-29 10:27:08 +05:30
MicroDev
858e212e34
enable octal flash in sdkconfig 2023-01-29 00:23:02 +05:30
MicroDev
401d160c58
opi flash needs to be flashed in dout 2023-01-28 11:04:21 +05:30
MicroDev
cda5689263
move esp32_camera to espcamera 2023-01-27 22:05:43 +05:30
MicroDev
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8 2023-01-26 11:21:43 +05:30