fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
0d3c5222d8
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-05-10 17:30:33 -04:00
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
579cdf30f1
fix more build errors
2021-05-05 16:49:29 -04:00
adc3d7d55e
update Python API according to review comments
2021-05-03 22:29:02 -04:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
1a52cbcf5d
Format a straggler file
2021-04-30 16:42:25 -05:00
dfa7c3d32d
codeformat: Fix handling of `**`
...
After discussing with danh, I noticed that `a/**/b` would not match `a/b`.
After correcting this and re-running "pre-commit run --all", additional
files were reindented, including the codeformat script itself.
2021-04-30 15:30:13 -05:00
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
e9e9c76ddf
all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
...
To match mp_sched_exception() and mp_sched_schedule().
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
bd54eb566f
nrf/boards/microbit: Use mp_sched_exception() where appropriate.
...
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
bab5a22f0c
Fix build issues
...
H7 compatibility problems in port.c and peripherals/exti
NRF build failures due to new use of const for PinAlarm pin objects
Isolated board flash overage on blackpill_with_flash, remove audio modules
2021-04-29 14:48:16 -04:00
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
9fe8d61656
Fix broken MP macros from 1.11 merge
2021-04-28 18:26:52 -04:00
5c4500dbfa
Fix MP type macros
2021-04-28 15:35:15 -04:00
d4d96bb25f
Merge pull request #4236 from jun2sak/nrf52-sleep
...
sleep and wakeup for nrf52
2021-04-28 12:11:31 -04:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
4e1d2fa056
Adding clearer on-board DotStar pin names.
2021-04-27 12:52:24 -04:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
43840363c2
Fix submodule
2021-04-26 17:59:21 -04:00
872fff7fbb
simplify system_on_idle_until_alarm()
2021-04-25 23:59:21 +09:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
7accb8b173
modify copyright notice.
2021-04-25 19:57:21 +09:00
a17fcb6d1a
add copyright notice. remove obsolete comments.
2021-04-25 19:19:11 +09:00
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
346740e152
Merge pull request #4609 from Neradoc/add_nrf_countio
...
NRF: implement countio
2021-04-23 08:37:00 -04:00
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
01979acd48
Merge pull request #4604 from tannewt/buffer_size
...
Assume max characteristic size when the client
2021-04-20 12:02:06 -04:00
f0b04d403d
Add board definition files for ARAMCON2 Badge
2021-04-19 20:41:01 +03:00
43c16c89c4
Account for max_packet_size in outgoing length
2021-04-15 16:34:06 -07:00
aa28d4f315
Allow setting max_packet_size for PacketBuffer
...
This is handy for remote characteristics because it allows for
the PacketBuffer binding code to have the correct max size. This
PR also adds checks so we don't write outside the outgoing buffer.
2021-04-14 17:09:48 -07:00
223027fe9e
shrink simmel
2021-04-15 01:43:02 +02:00
0d743224f2
add countio to nrf port
2021-04-14 01:37:19 +02:00
b273f59c4e
Assume max characteristic size when the client
2021-04-13 15:37:47 -07:00
6e9429d779
soft reboot for pretending deep sleep.
2021-04-12 20:53:14 +09:00
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor
...
IncrementalEncoder: factor out the quadrature state machine
2021-04-09 13:10:02 -04:00
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
72055ff02b
Merge pull request #4578 from tannewt/packetbuffer_lengths
...
Improve PacketBuffer lengths and remove packet_size
2021-04-08 18:55:24 -04:00
d69ca4a8ae
nrf: switch to shared softencoder implementation
2021-04-08 16:36:10 -05:00
e3b3f97fa6
Improve PacketBuffer packet lengths for remote service
2021-04-08 13:25:11 -07:00
1afd204828
Changed error message to display the generic term 'system firmware' instead of the Nordic specific term 'soft device'
2021-04-02 20:34:37 +02:00
58835e5a5b
Two small PacketBuffer fixes
...
1. Allow for ctrl-c during a write.
2. Handle disconnects when acting as a client.
2021-04-01 14:16:35 -07:00
0752bbd5fd
Fix central pairing and crash on clear
...
The list_clear would crash if we tried to clear a NULL list. (It
can happen if we haven't tried to discover any services.)
2021-03-31 16:04:04 -07:00
da4dceea15
Fix 16MB Winbond names
2021-03-25 11:37:08 -07:00
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
75ba26ee7c
Merge pull request #4421 from kattni/led-pin
...
Adding LED for D13/L pin name.
2021-03-16 18:58:14 -05:00
2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840
...
Add new nRF port for SF MicroMod nRF52840.
2021-03-10 18:13:11 -08:00
d5365cb066
SDIO/QSPI pin names. ¯\_(ツ)_/¯
2021-03-09 18:36:29 -05:00
5beb529f61
Update pins, remove unused defs from board config.
2021-03-09 17:43:13 -05:00
fe0655e121
Update pins, remove unused defs from board config.
2021-03-09 17:39:50 -05:00
1ae858126a
Fix the mpconfigboard.mk that was screwy?
2021-03-09 17:29:10 -05:00
a61db7f12e
Updated SparkFun MicroMod USB PID
...
As per the PID provide by TheHoff, [here](https://forum.sparkfun.com/viewtopic.php?p=223812#p223812 )
2021-03-09 12:54:52 -05:00
c8f36e604c
reset myself, not go REPL, after wakeup from deep sleep.
2021-03-09 00:42:22 +09:00
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
51c7a49853
Merge branch 'main' into nrf52-sleep
2021-03-07 20:50:53 +09:00
5bd1107fec
Clean up.
2021-03-07 20:38:04 +09:00
2eed9a1735
old System OFF sleep code for future reference.
2021-03-07 20:21:33 +09:00
7430b92d27
address hw pin-reset while sleep.
2021-03-07 20:20:29 +09:00
2795c002ad
disable QSPI while system ON idle loop.
2021-03-07 19:14:04 +09:00
cd5c0e99f7
Clean up.
2021-03-07 19:09:01 +09:00
3b76299f39
Add new nRF port for SF MicroMod nRF52840.
2021-03-07 01:06:50 -05:00
3fab9f8b1b
new wait-until-alarm design, don't use System OFF.
2021-03-07 01:09:54 +09:00
e0b96c0f43
[nrf] No need to store `buffer_length` as part of `audiopwmio_pwmaudioout_obj_t`
2021-03-05 06:01:58 -05:00
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
...
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
7cecd99658
remove unused debug printf's.
2021-02-28 16:04:29 +09:00
3e47e00291
address the pretending-to-deep-sleep issue.
2021-02-28 15:57:37 +09:00
498debc826
remove unused debug printf's.
2021-02-28 15:37:25 +09:00
9b34726c0d
GPIO and GPIOTE reg dump for debug.
2021-02-28 15:36:14 +09:00
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-25 16:59:15 -08:00
0f8c96f424
remove trailing whitespaces.
2021-02-26 09:11:35 +09:00
7fd4648cd5
rase error if Alarm time >= 512 sec.
2021-02-26 09:06:11 +09:00
277a67d876
call touchalarm funcs as well as pin/timealarm.
2021-02-26 08:11:50 +09:00
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
2aa5aec0d5
cleanup.
2021-02-26 01:45:12 +09:00
c713d31d0d
move externs to .h
2021-02-26 01:20:55 +09:00
c86ca2a4ff
move externs to .h
2021-02-26 00:51:52 +09:00
9328d09a7a
re-enable parameters check.
2021-02-26 00:50:44 +09:00
61a69daae1
raise NotImplementedError when construct TouchAlarm.
2021-02-25 08:19:03 +09:00
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
f66896ce32
use nRF SDK function to set up memory retention.
2021-02-25 02:34:43 +09:00
9661d67cd3
replace MY_DEBUG_UART -> NRF_DEBUG_PRINT.
2021-02-25 01:49:57 +09:00
72b5f1a9a6
clean up my personal settings.
2021-02-25 01:38:23 +09:00
0f188befb6
set RAM retention just before deep sleep
2021-02-24 00:12:25 +09:00
ec64fa6a29
move dump_xxx functions to debug_uart.c.
2021-02-23 12:16:37 +09:00
372c98626a
move all the debug codes from port.c to debug_uart.c.
2021-02-23 11:56:40 +09:00
9df0f439f3
alarm/pin/__init__.c is no longer used.
2021-02-23 10:31:49 +09:00
5c858a1925
add weak board_deinit().
2021-02-21 16:27:21 +09:00
1da8b9900a
Merge branch 'main' into nrf52-sleep
2021-02-21 13:35:06 +09:00
36c59250dd
some cleanups.
2021-02-21 09:57:14 +09:00
d659c2ce34
move port-specific debug functions from supervisor/shared/serial.c to ports/nrf/supervisor/port.c
2021-02-21 09:55:10 +09:00
793198909e
set SleepMemory size to 256 bytes.
2021-02-21 08:19:39 +09:00
41d9d4e0ab
call sd API only when sd enabled.
2021-02-21 08:17:57 +09:00
cf3217e6d4
Merge pull request #4232 from TG-Techie/fix_tg_watch
...
fix TG-Watch ble issue
2021-02-20 18:10:52 -05:00
a9a2145238
fix TG-Watch ble issue
2021-02-20 15:46:33 -05:00
26f8f532f1
safe mode fix.
2021-02-21 00:47:07 +09:00
985e020936
shrink simmel build
2021-02-19 18:41:27 -05:00
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
5c37b73c6d
fix typo to fix nrf builds
2021-02-18 11:09:32 -05:00
cf2427c561
light sleep reason fix.
2021-02-17 21:51:28 +09:00
e6350ff834
Initial commit.
2021-02-17 20:53:18 +09:00
701fdcacaf
nrf/drivers/usb: Add USBD_IRQHandler which calls tud_int_handler.
...
This is needed for TinyUSB to process USB device IRQs.
Related to #6325 .
Signed-off-by: Damien George <damien@micropython.org>
2021-02-13 13:52:53 +11:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
035d16126a
ports: Update to build with new tinyusb.
...
Signed-off-by: Damien George <damien@micropython.org>
2021-02-12 12:50:36 +11:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
ad4656b861
all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
...
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture. So rename this config value to better reflect what it
measures, and also prefix it with MP_.
For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).
Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
7c44354592
ports: Remove def of MP_PLAT_PRINT_STRN if it's the same as the default.
...
To simplify config, there's no need to specify MP_PLAT_PRINT_STRN if it's
the same as the default definition in py/mpconfig.h.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:39:17 +11:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
745ba01768
shrink simmel
2021-02-01 12:22:35 -05:00
993ab6aa2c
nrf/README: Add use of "make submodules" in alternative build paragraph.
...
Add "make submodules" to commands when building for the first time.
Otherwise, on a first time build, the submodules have not been checked out
and a lot of `fatal error: nrfx.h: No such file or directory` errors are
printed.
2021-01-30 14:32:55 +11:00
e285b5b98c
Merge remote-tracking branch 'adafruit/main' into cp-flow
2021-01-27 09:22:41 -08:00
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
f154ee855d
shrink simmel
2021-01-26 10:23:37 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
e27dd26dc7
make translate, BEWARE adds the 'world'
2021-01-18 11:26:39 -08:00
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
c4f0325ff8
Merge pull request #3991 from TG-Techie/main
...
Revision to TG-Watch
2021-01-14 18:43:52 -05:00
c63d5a44a0
restore TG-Watch USB_PID from accidental overwrite
2021-01-14 00:08:34 -05:00
5f8ad0c5e6
correct USB_PRODUCT for TG-Watch
2021-01-14 00:02:56 -05:00
8f8af90098
final name and extra board
2021-01-13 23:51:34 -05:00
ccace62ac9
don't check length for remote characteristic or dedescriptor
2021-01-13 15:35:51 -05:00
4db55652a3
Merge pull request #3964 from dhalbert/ble-timing-fixes
...
Round BLE timing values; fix timeout check
2021-01-11 16:52:14 -08:00
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
8652d69614
update TG-Watch pins, name, and frozen libraries
2021-01-10 04:04:50 -05:00
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
9a1d864331
overflowed tick counter needs 64 bits everywhere
2021-01-06 11:09:06 -05:00
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
fb0c74c5f1
Merge pull request #3662 from ElectronicCats/bastble
...
Add new board BastBLE
2020-12-21 17:39:08 -08:00
d24a5d6270
update path board.h
2020-12-20 15:52:19 -06:00
bd3c5c33fb
define QSPI pinout
2020-12-20 14:57:10 -06:00
Dan Halbert
Scott Shawcroft
Lucian Copeland
Jeff Epler
Artyom Skrobov
Jeff Epler
Jeff Epler
Damien George
Dan Halbert
Scott Shawcroft
Kattni Rembor
jun2sak
Benny Meisels
Neradoc
Neradoc
Jonny Bergdahl
gamblor21
Mark
microDev
nitz
Kevin Matocha
Jonah Yolles-Murphy
BiffoBear
Chris Hemingway
Bernhard Boser
foamyguy
iot49
sabas1080