Commit Graph

71 Commits

Author SHA1 Message Date
Dan Halbert c37f021791 regularize and shrink many builds 2021-05-05 12:35:41 -04:00
Kattni Rembor 2b910b7292 Adding LED for D13/L pin name. 2021-03-16 12:14:40 -04:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Jeff Epler f1ada8e880 Automatically count EXTERNAL_FLASH_DEVICES 2021-03-07 11:48:39 -06:00
Kevin Matocha a7a4f93ff8 Updated build configs to turn off BITMAPTOOLS for smaller builds 2021-02-25 15:44:32 -06:00
gamblor21 49e059cdaf Removing frozen libraries 2021-01-16 16:37:42 -06:00
Scott Shawcroft 91245297e8
Merge pull request #3659 from iot49/msgpack
module msgpack
2021-01-11 15:22:39 -08:00
Kattni Rembor bbd4de33d1 Add adafruit_bus_device to CPX builds. 2021-01-04 15:53:39 -05:00
Scott Shawcroft 344d3c59cb
Merge branch 'main' into msgpack 2020-12-11 11:10:30 -08:00
Scott Shawcroft 0b4bcd9599
Fix build and more comments 2020-12-08 13:05:21 -08:00
Scott Shawcroft 40118bcf57
Add `board_deinit` for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
Bernhard Boser 59c3e25168
disable on boards tight on memory. add stddef.h to imports (not actually needed). 2020-12-01 18:39:24 -08:00
gamblor21 f61c4e62c1 Removing from smaller builds 2020-11-11 10:24:33 -06:00
Kenny 3c46e3a6aa
Turn off async for circuitplayground express
Firmware too large
2020-10-11 08:16:36 -07:00
microDev 4c7d9e3aaf
Update make translate script 2020-09-29 11:14:30 +05:30
microDev 36da92075b Update safe mode reason 2020-09-13 22:57:24 +05:30
microDev 5deac8d249 Update board specific safe mode message 2020-09-13 18:22:40 +05:30
Jerry Needell 2bdd62220e adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice 2020-07-27 21:50:36 -04:00
Jeff Epler 1d2cc0b968 I2CPeripheral: Rename class and its module
This is an incompatible change.
2020-06-25 11:44:19 -05:00
Dan Halbert 68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Dan Halbert 4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Dan Halbert 81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
Dan Halbert 7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Dan Halbert ba1b36a800 Uncomment vm.c SUPEROPT (debugging typo); trim a few builds 2019-06-12 13:09:09 -04:00
Dan Halbert 1bb4fccc3b Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files 2019-06-12 11:08:22 -04:00
Dan Halbert 0b3f29780a shrink a bunch of builds to fit 2019-06-11 18:46:06 -04:00
Dan Halbert 4e85c1ef91 Implement forced clean builds for boards so designated.
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.

Fixes #1910.
2019-05-24 15:32:24 -04:00
Dan Halbert 0199d9810b Make pinyin fit on cpx 2019-05-21 15:18:56 -04:00
Scott Shawcroft 796fc3f5ab
Update font location and shrink a bunch of builds 2019-04-12 15:25:48 -07:00
Scott Shawcroft 0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Dan Halbert fbf166af1a enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit 2019-03-20 14:36:24 -04:00
sommersoft 2cd6a79016 better handle frequencyio inclusion 2019-03-01 22:46:57 -06:00
Dan Halbert cf545cd477 WIP: fix issues with remaining atmel-samd builds 2019-02-15 09:52:45 -05:00
Scott Shawcroft aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space. 2019-01-22 18:49:37 -08:00
Scott Shawcroft 2d136d58bf
Fix other builds and hallowing 2019-01-17 14:45:29 -08:00
Scott Shawcroft 6ef8639971
Rework safe mode and have heap overwrite trigger it.
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.

The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.

A couple NeoPixel fixes are included for the nRF52 as well.

Fixes #1034. Fixes #990. Fixes #615.
2018-12-06 14:24:20 -08:00
Dan Halbert 11de8fdca7 merge 3.x swap of /lib and .frozen; update frozen libs 2018-11-15 15:00:23 -05:00
Scott Shawcroft 43f7ca7985
Incorporate feedback:
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
Scott Shawcroft 9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
ATMakersBill bd4188a092 adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh 2018-11-03 14:42:27 -04:00
Dan Halbert 9ea809bef7 add pin claiming to devices 2018-08-31 18:38:05 -04:00
Scott Shawcroft 769788d3c7 Turn off USB pin objects since they are always used for USB. 2018-06-08 12:56:32 -07:00
Scott Shawcroft fd71e56891 atmel-samd: Re-org helper peripheral files into their own subdirectory.
Ideally in the future they won't depend on ASF4 or MicroPython.
2018-06-01 15:07:31 -07:00
Dan Halbert 45db48bbaa make longint choice mechanism more readable 2018-05-22 08:04:14 -04:00
Dan Halbert 5680933483 refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00
Noralf Trønnes cf33ad9a54 atmel-samd/samd21: Enable long int on Express boards
This is necessary for using 1970 epoch in the time module.
2018-05-18 12:35:26 +02:00
Matt Land 173a0a5faa arduino, circuitplayground, feather boards 2018-05-17 13:42:08 -04:00
Matt Land 3144654854 SPI for all boards 2018-05-16 15:36:36 -04:00
Matt Land 244866c2c3 spi on much 2018-05-16 15:25:24 -04:00
Matt Land 10888be8e8 fixed pins 2018-05-16 15:07:12 -04:00