Commit Graph

75 Commits

Author SHA1 Message Date
RetiredWizard ecde85734c Remove a couple unneeded includes. 2023-01-23 15:17:24 -05:00
RetiredWizard fb4def2824 remove CIRCUITPY_RTC = 1 from mpconfigport.mk
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
2023-01-23 14:52:20 -05:00
RetiredWizard 43b1d2618e
Remove erroneous left over comment 2023-01-23 14:19:27 -05:00
RetiredWizard 4f830f1bbb Fix parameter name and remove unnecessary function 2023-01-21 22:57:52 -05:00
RetiredWizard 3361ec390d Broadcom port: Add 'fake' RTC support
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
2023-01-21 22:19:10 -05:00
Scott Shawcroft ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
Scott Shawcroft c3a96a63c0
Enable* web workflow for Pico W
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.

Progress on #7214
2022-11-21 16:24:05 -08:00
MicroDev c3c1717813
refactor common port specific Makefile code 2022-11-18 23:00:28 +05:30
MicroDev e2a3597263
add awesome new make error message
Copied from initial implementation on atmel-samd

Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
2022-11-18 11:27:23 +05:30
Jeff Epler 907c5d387f
Tweak black_bindings
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.

Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation

This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)

It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.

I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Dan Halbert db065a299f
Merge pull request #6933 from jepler/🥧🐮
Implement a useful subset of `wifi` and `socketpool` modules on 🥧🐮
2022-09-28 18:09:24 -04:00
Jeff Epler 346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out 2022-09-28 10:06:33 -05:00
Jeff Epler b2cc8d2aad
run black_bindings across all bindings 2022-09-27 15:21:42 -05:00
Dan Halbert e25c195b78 fix broadcom UART ringbuf init 2022-09-25 09:12:23 -04:00
Dan Halbert ea15a9118a ringbuf cleanup 2022-09-21 10:03:05 -04:00
RetiredWizard 14b604f48c
Add LED pin definition to Zero 2W board 2022-09-10 23:18:25 -04:00
RetiredWizard 28756936d5
Add HW_LED_STATUS pin to Zero 2W board 2022-09-10 23:17:02 -04:00
RetiredWizard 38a0ca324e
Uses different pins for RX/TX 2022-09-10 21:48:10 -04:00
RetiredWizard f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:42:41 -04:00
RetiredWizard 1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:40:31 -04:00
RetiredWizard 1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:39:51 -04:00
RetiredWizard 29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:39:03 -04:00
RetiredWizard fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:38:16 -04:00
RetiredWizard 72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:37:31 -04:00
RetiredWizard a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:36:41 -04:00
RetiredWizard 7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:36:01 -04:00
RetiredWizard 0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:34:45 -04:00
RetiredWizard ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX 2022-09-10 21:33:29 -04:00
Dan Halbert 4cb69a51d5 Use MP_WEAK for default board.c routines 2022-09-08 07:36:50 -04:00
Dan Halbert 84807cd6eb Change I2C terminology from "peripheral" to "target" 2022-08-09 13:13:19 -04:00
Neradoc eabe8b971a list extensions instead of macros names ("bin,uf2" not BIN_UF2)
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
Neradoc d021d9ae4a Move build extensions to board directories
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
Scott Shawcroft ac460dd1e1
Merge branch 'main' into esp32 2022-07-13 15:30:53 -07:00
Jeff Epler c4dfd8e30a
Fix default BOARD setting & messages
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
2022-07-07 17:17:15 -05:00
Dan Halbert 8bb369cac5 refactor debug UART to console UART; get working on ESP32 2022-06-30 23:16:46 -04:00
Scott Shawcroft 4d776339ad
Separate translate object control from LTO 2022-05-31 12:42:59 -07:00
Scott Shawcroft 9d10a3da66
Conditionalize LTO 2022-05-27 12:59:54 -07:00
Dan Halbert a01dec1df9 message consolidation and more use of validators 2022-05-19 15:38:37 -04:00
Jeff Epler 78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
Jeff Epler 31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
Scott Shawcroft 83593a1558
Start of USB host API
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)

Related to #5986
2022-03-07 18:07:25 -08:00
Scott Gauche a8d8651873 Canonical C style for half_duplex = true/false 2022-02-08 23:13:22 -05:00
Scott Gauche 89ad767b8f add half_duplex to spi constructs in other ports but raise not implemented errors 2022-02-08 22:25:23 -05:00
Dan Halbert cc410ad6a3 common-hal I2C combined write_read 2022-01-31 22:03:30 -05:00
Scott Shawcroft bec36f5c7f
Add Pi Zero and update PIDs 2022-01-07 11:47:31 -08:00
Scott Shawcroft 39a239113f
Enable neopixel for status 2022-01-07 11:23:50 -08:00
Scott Shawcroft 3238d8364d
Piunora + full build + high speed usb 2022-01-07 11:23:50 -08:00
Scott Shawcroft 5f32d1f34b
Piunora pinout 2022-01-07 11:23:49 -08:00
Dan Halbert afd686986a
Merge pull request #5800 from tannewt/rpi_zero
Initial Pi Zero support
2022-01-07 09:05:30 -05:00
Scott Shawcroft 2a2f94df15
Update tinyusb for zero support 2022-01-06 08:52:33 -08:00