Commit Graph

182 Commits

Author SHA1 Message Date
Jeff Epler 52540a9830 Rename EXTENDED_FIELDS -> MP_TYPE_EXTENDED_FIELDS 2021-07-12 06:57:59 -05:00
Jeff Epler 7302bc09a7 rename the type flag to EXTENDED for consistency 2021-07-09 14:59:37 -05:00
Jeff Epler 0d756066e8 milestone: coverage make test_full passes 2021-07-06 10:37:32 -05:00
Jeff Epler df56ba207f WIP 2021-07-06 09:25:56 -05:00
Scott Shawcroft f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Radomir Dopieralski 24473b7983 Separate out mp_obj_list_insert for use in display.Group
Note that for some reason this makes the binary 500 bytes larger!
2021-02-27 21:13:55 +01:00
Radomir Dopieralski e505c59ed8 Separate mp_obj_list_pop so it can be used outside of objlist.c 2021-02-27 20:52:38 +01:00
Jeff Epler 93b373d617 "pop from empty %q"
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
Jeff Epler dddd25a776 Combine similar strings to reduce size of translations
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used.  The net savings on trinket_m0 is
just 32 bytes.

It also means that the translation will include the original English
text, and cannot be translated.  These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
Diego Elio Pettenò 34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Scott Shawcroft 2cc20e8816
Remove unneeded native cast. 2020-01-30 10:59:16 -08:00
Scott Shawcroft f6a635b102
Fix subclassing of objects that are tested. Others may still be broken. 2020-01-27 14:52:42 -08:00
Roy Hooper 767ce1cdf8 remove unnecessary GCC pragmas 2020-01-02 18:03:18 -05:00
Damien George 09376f0e47 py: Introduce MP_ROM_NONE macro for ROM to refer to None object.
This helps to prevent mistakes, and allows easily changing the ROM value of
None if needed.
2019-12-27 22:51:17 +11:00
Damien George 035180ca01 py: Remove commented-out debug printf's from emitbc and objlist.
Any debugging prints should use a macro like DEBUG_printf.
2019-12-20 23:34:46 +11:00
Roy Hooper dc8dd6df20 Revert subscr signature change 2019-12-13 14:29:15 -05:00
Roy Hooper 15072c69c9 push changes 2019-12-13 14:07:53 -05:00
Roy Hooper a9baa441c9 disable -Wunused-parameter on subscr functions 2019-11-23 13:52:14 -05:00
Roy Hooper c770ccd939 make ->subscr take an instance to pass when instance_subscr is called from subscr. 2019-11-23 12:09:26 -05:00
Dan Halbert 7ce3776b80 WIP: rework of Characteristic properties; enhance Descriptor; not tested 2019-08-02 17:57:31 -04:00
Dan Halbert 35b9191857 Don't operate directly on bleio objects in shared-bindings: use common_hal
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
Damien George eee1e8841a py: Downcase all MP_OBJ_IS_xxx macros to make a more consistent C API.
These macros could in principle be (inline) functions so it makes sense to
have them lower case, to match the other C API functions.

The remaining macros that are upper case are:
- MP_OBJ_TO_PTR, MP_OBJ_FROM_PTR
- MP_OBJ_NEW_SMALL_INT, MP_OBJ_SMALL_INT_VALUE
- MP_OBJ_NEW_QSTR, MP_OBJ_QSTR_VALUE
- MP_OBJ_FUN_MAKE_SIG
- MP_DECLARE_CONST_xxx
- MP_DEFINE_CONST_xxx

These must remain macros because they are used when defining const data (at
least, MP_OBJ_NEW_SMALL_INT is so it makes sense to have
MP_OBJ_SMALL_INT_VALUE also a macro).

For those macros that have been made lower case, compatibility macros are
provided for the old names so that users do not need to change their code
immediately.
2019-02-12 14:54:51 +11:00
Scott Shawcroft c60f77d5ab
Check sequence multiply for length overflow
Fixes #1279
2019-02-04 15:33:36 -08:00
Scott Shawcroft 72d993d60c
py changes for supporting superclass constructors that take kwargs 2019-01-14 17:29:19 -08:00
Scott Shawcroft 96ebf5bc3f
Two fixes and translate more strings.
* Fix finding translations with escaped characters.
* Add back \r to translations since its needed by screen.
2018-08-09 13:29:30 -07:00
Scott Shawcroft 7b393bc406 Merge tag 'v1.9.3'
Introduction of ports subdirectory where all ports are moved to

The main change in this release is the introduction of a "ports/"
subdirectory at the top-level of the repository, and all of the ports are
moved here.  In the process the "stmhal" port is renamed to "stm32" to
better reflect the MCU that it targets.  In addition, the STM32 CMSIS and
HAL sources are moved to a new submodule called "stm32lib".

The bytecode has changed in this release, compared to the previous release,
and as a consequence the .mpy version number has increased to version 3.
This means that scripts compiled with the previous mpy-cross must be
recompiled to work with this new version.

There have also been various enhancements and optimisations, such as:
check for valid UTF-8 when creating str objects, support for reverse
special binary operations like __radd__, full domain checking in the math
module, support for floor-division and modulo in the viper emitter,
and addition of stack overflow checking when executing a regex.

The stm32 port sees improved support for F7 MCUs, addition of a new board
B_L475E_IOT01A based on the STM32L475, and support for the Wiznet W5500
chipset along with improved socket behaviour.

A detailed list of changes follows.

py core:
- objstr: startswith, endswith: check arg to be a string
- nlrx86,x64: replace #define of defined() with portable macro usage
- objtype: handle NotImplemented return from binary special methods
- objtype: mp_obj_class_lookup: improve debug logging
- map: remove unused new/free functions
- make m_malloc_fail() have void return type, since it doesn't return
- modstruct: in struct.pack, stop converting if there are no args left
- modstruct: check and prevent buffer-read overflow in struct unpacking
- modstruct: check and prevent buffer-write overflow in struct packing
- nlrthumb: get working again on standard Thumb arch (ie not Thumb2)
- objfloat: fix binary ops with incompatible objects
- obj: fix comparison of float/complex NaN with itself
- objtype: implement fallback for instance inplace special methods
- objtuple: properly implement comparison with incompatible types
- objstr: add check for valid UTF-8 when making a str from bytes
- objlist: properly implement comparison with incompatible types
- runtime0.h: move relational ops to the beginning of mp_binary_op_t
- runtime0.h: move MP_BINARY_OP_DIVMOD to the end of mp_binary_op_t
- objtype: make sure mp_binary_op_method_name has full size again
- runtime0.h: put inplace arith ops in front of normal operations
- builtinhelp: simplify code slightly by extracting object type
- runtime: implement dispatch for "reverse op" special methods
- nlrx86: fix building for Android/x86
- builtinhelp: change signature of help text var from pointer to array
- runtime.h: change empty mp_warning macro so var-args are non empty
- modbuiltins: implement abs() by dispatching to MP_UNARY_OP_ABS
- {objfloat,objcomplex}: optimise MP_UNARY_OP_ABS by reusing variables
- mpconfig.h: add note that using computed gotos in VM is not C99
- objstr: strip: don't strip "\0" by default
- objexcept: prevent infinite recursion when allocating exceptions
- stream: remove unnecessary checks for NULL return from vstr_add_len
- vstr: raise a RuntimeError if fixed vstr buffer overflows
- vm: use lowercase letter at start of exception message
- persistentcode: define mp_raw_code_save_file() for any unix target
- add config option to print warnings/errors to stderr
- objfloat: support raising a negative number to a fractional power
- objset: simplify set and frozenset by separating their locals dicts
- objset: check that RHS of a binary op is a set/frozenset
- objset: include the failed key in a KeyError raised from set.remove
- objtype: change type of enum-to-qstr table to uint16_t to save space
- objstr: make empty bytes object have a null-terminating byte
- mpprint: only check for null string printing when NDEBUG not defined
- objtype: clean up unary- and binary-op enum-to-qstr mapping tables
- persistentcode: bump .mpy version number to version 3
- bc: update opcode_format_table to match the bytecode
- modmath: add full checks for math domain errors
- modmath: convert log2 macro into a function
- formatfloat: don't print the negative sign of a NaN value
- formatfloat: use standard isinf, isnan funcs instead of custom ones
- modbuiltins: use existing utf8_get_char helper in builtin ord func
- emitnative: implement floor-division and modulo for viper emitter
- objtype: use CPython compatible method name for sizeof
- objtype: fit qstrs for special methods in byte type
- objtype: define all special methods if requested
- objtype: introduce MICROPY_PY_ALL_INPLACE_SPECIAL_METHODS

extmod:
- modubinascii: only include uzlib/tinf.h when it's really needed
- modussl_mbedtls: allow to compile with MBEDTLS_DEBUG_C disabled
- machine_pinbase: put PinBase singleton in ROM
- re1.5: upgrade to v0.8.2, adds hook for stack overflow checking
- modure: add stack overflow checking when executing a regex
- uos_dupterm: update uos.dupterm() and helper funcs to have index
- uos_dupterm: swallow any errors from dupterm closing the stream
- vfs: replace VLA in proxy func with small, static sized array
- modussl: add finaliser support for ussl objects
- modussl_mbedtls: allow to compile with unix coverage build

lib:
- add new submodule, stm32lib containing STM32 CMSIS and HAL source
- embed/abort_: use mp_raise_msg helper function
- libm: fix tanhf so that it correctly handles +/- infinity args
- libm: remove implementation of log2f, use MP_NEED_LOG2 instead
- axtls: update, support for SSL_EAGAIN return code
- berkeley-db-1.xx: update, allow to override MINCACHE, DEFPSIZE

drivers:
- memory/spiflash: change from hard-coded soft SPI to generic SPI
- display/ssd1306.py: improve performance of graphics methods
- nrf24l01: make nRF24L01 test script more portable
- display/ssd1306: implement SSD1306_I2C poweron method
- display/ssd1306: make poweron() work the same with SSD1306_SPI
- wiznet5k: improve the performance of socket ops with threading
- wiznet5k: get low-level W5500 driver working

tools:
- upip: upgrade to 1.2.2
- pyboard: use repr() when quoting data in error messages
- pyboard: update docstring for additional device support

tests:
- object_new: better messages, check user __new__() method
- class_new: add checks for __init__ being called and other improvements
- class_new: add another testcase for __new__/__init__ interaction
- class_inplace_op: test for inplace op fallback to normal one
- run-bench-tests: update locations of executables, now in ports/
- class_reverse_op: test for reverse arith ops special methods
- run-tests: skip class_inplace_op for minimal profile
- run-tests: fix copy-paste mistake in var name
- cpydiff: add cases for locals() discrepancies
- extmod: add test for ure regexes leading to infinite recursion
- extmod: add test for '-' in character class in regex
- run-tests: close device under test using "finally"
- net_inet: update tls test to work with CPython and incl new site

unix port:
- rename modsocket.c to modusocket.c
- modusocket: remove #if MICROPY_SOCKET_EXTRA code blocks
- enable MICROPY_PY_REVERSE_SPECIAL_METHODS

stm32 port:
- modmachine: make machine.bootloader() work when MPU is enabled
- modmachine: improve support for sleep/deepsleep on F7 MCUs
- compute PLL freq table during build instead of at run time
- modmachine: for F7 MCU, save power by reducing internal volt reg
- boards/pllvalues.py: make script work with both Python 2 and 3
- Makefile: use lib/stm32lib instead of local cmsis and hal files
- remove cmsis and hal files, they are now a submodule
- Makefile: automatically fetch stm32lib submodule if needed
- update to new STM Cube HAL library
- fix clock initialisation of L4 MCUs
- rename stmhal port directory to stm32
- remove unused usbd_msc.c file
- boards: change remaining stm32f4xx_hal_conf.h to unix line ending
- boards: change linker scripts to use "K" instead of hex byte size
- boards: fix I2C1 pin mapping on NUCLEO_F401RE/F411RE boards
- i2c: when scanning for I2C devices only do 1 probe per address
- modnwwiznet5k: release the GIL on blocking network operations
- boards: add new board B_L475E_IOT01A based on STM32L475
- make-stmconst.py: make sure mpz const data lives in ROM
- timer: make pyb.Timer() instances persistent
- mpconfigport.h: add configuration for max periphs on L4 series
- usbdev: make the USBD callback struct const so it can go in ROM
- usbdev: change static function variable to non-static
- usbdev: put all CDC state in a struct
- usbdev: put all HID state in a struct
- usbdev: simplify CDC tx/rx buffer passing
- usbdev: simplify HID tx/rx buffer passing
- usbdev/core: add state parameter to all callback functions
- usbdev: put all state for the USB device driver in a struct
- usbdev: simplify pointers to MSC state and block dev operations
- usbdev: merge all global USB device state into a single struct
- usbdev: make device descriptor callbacks take a state pointer
- usbdev: move all the USB device descriptor state into its struct
- timer: enable ARPE so that timer freq can be changed smoothly
- modnwwiznet5k: get the IP address of an established socket
- boards: fix typos in stm32f767_af.csv table
- usbd_cdc_interface: don't reset CDC output buf on initialisation
- modnwwiznet5k: implement WIZNET5K.isconnected() method
- modusocket: make getaddrinfo() work when passed an IP address
- modusocket: return OSError(-2) if getaddrinfo fails
- mpconfigport.h: add MICROPY_THREAD_YIELD() macro
- modnwwiznet5k: add support for W5500 Ethernet chip
- modnwwiznet5k: increase SPI bus speed to 42MHz
- modnwwiznet5k: implement stream ioctl for the Wiznet driver
- mphalport: improve efficiency of mp_hal_stdout_tx_strn_cooked
- make uos.dupterm() conform to specs by using extmod version

cc3200 port:
- enable micropython.kbd_intr() method
- use standard implementation of keyboard interrupt

esp8266 port:
- rename axtls_helpers.c to posix_helpers.c
- posix_helpers: set ENOMEM on memory alloc failure
- set DEFPSIZE=1024, MINCACHE=3 for "btree" module
- esp_mphal: send data in chunks to mp_uos_dupterm_tx_strn
- modnetwork: add "bssid" keyword arg to WLAN.connect() method
- modules/webrepl_setup: add info about allowed password length

zephyr port:
- Makefile: revamp "test" target after ports were moved to ports/
- use CONFIG_NET_APP_SETTINGS to setup initial network addresses
- switch to interrupt-driven pull-style console

pic16bit port:
- add definition of SEEK_SET to unistd.h

docs:
- pyboard/tutorial: add "timeout=0" to UART in pass-through example
- more xrefs to "MicroPython port" in glossary
- library/network: fix ref to "socket" module (should be "usocket")
- machine.Signal: improve style/grammar and add usage example
- library: add description of "index" parameter to uos.dupterm()
- library/micropython: fix typo in RST formatting
- library/framebuf.rst: generalise constructor to all colour formats
- btree: describe page caching policy of the underlying implementation
- esp8266/tutorial: update neopixel with example of using 4 bbp
- library/network: clarify usage of "bssid" arg in connect() method
- pyboard/quickref: add info for Switch, RTC, CAN, Accel classes
- pyboard/tutorial: update now that yellow LED also supports PWM
- esp8266/quickref: add quickref info for RTC class
- library: add missing cross-ref links for classes in pyb module
- library/network: update docs to state that W5500 is supported
- uselect: document one-shot polling mode
- usocket: elaborate descriptions
- usocket: document inet_ntop(), inet_pton()
- library/network: add dhcp_hostname parameter
- reference/isr_rules: minor typo correction
- ussl: fix module name refs and use "MicroPython port" term
- esp8266/general: add section on TLS limitations
- usocket: document that settimeout() isn't supported by all ports
- ure: add "|" (alternative) to the list of supported operators
- reference/isr_rules.rst: add tutorial on use of micropython.schedule()

travis:
- use --upgrade when pip is installing cpp-coveralls
- update build command now that stm32 Wiznet config has changed

examples:
- hwconfig_console: add .on()/.off() methods

all:
- convert mp_uint_t to mp_unary_op_t/mp_binary_op_t where appropriate
- convert remaining "mp_uint_t n_args" to "size_t n_args"
- make new ports/ sub-directory and move all ports there
- update Makefiles and others to build with new ports/ dir layout
- remove inclusion of internal py header files
- use NULL instead of "" when calling mp_raise exception helpers

README:
- update "Dependencies" section
- add explicit section on contributing
- add gcc and arm-none-eabi-newlib to list of required components

.gitattributes:
- remove obsolete entries for stmhal/hal, stmhal/cmsis
- add entries for files that will move to ports/ dir
2017-11-02 12:41:50 -07:00
Scott Shawcroft 73c15dcf8b Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge
This is prep for merging in the NRF5 pull request.
2017-10-24 22:31:16 -07:00
Damien George f4059dcc0c all: Use NULL instead of "" when calling mp_raise exception helpers.
This is the established way of doing it and reduces code size by a little
bit.
2017-10-24 22:39:36 +11:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Paul Sokolovsky 5c603bd0fd py/objlist: Properly implement comparison with incompatible types.
Should raise TypeError, unless it's (in)equality comparison.
2017-09-07 00:10:10 +03:00
Damien George 58321dd985 all: Convert mp_uint_t to mp_unary_op_t/mp_binary_op_t where appropriate
The unary-op/binary-op enums are already defined, and there are no
arithmetic tricks used with these types, so it makes sense to use the
correct enum type for arguments that take these values.  It also reduces
code size quite a bit for nan-boxing builds.
2017-08-29 13:16:30 +10:00
Dan Halbert ef61b5ecb5 Initial merge of micropython v1.9.2 into circuitpython 2.0.0 (in development) master.
cpx build compiles and loads and works in repl; test suite not run yet
esp8266 not tested yet
2017-08-25 22:17:07 -04:00
Javier Candeira 35a1fea90b all: Raise exceptions via mp_raise_XXX
- Changed: ValueError, TypeError, NotImplementedError
  - OSError invocations unchanged, because the corresponding utility
    function takes ints, not strings like the long form invocation.
  - OverflowError, IndexError and RuntimeError etc. not changed for now
    until we decide whether to add new utility functions.
2017-08-13 22:52:33 +10:00
Paul Sokolovsky bfc2092dc5 py/modsys: Initial implementation of sys.getsizeof().
Implemented as a new MP_UNARY_OP. This patch adds support lists, dicts and
instances.
2017-08-11 09:43:07 +03:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Scott Shawcroft 30ee7019ca Merge tag 'v1.9.1'
Fixes for stmhal USB mass storage, lwIP bindings and VFS regressions

This release provides an important fix for the USB mass storage device in
the stmhal port by implementing the SCSI SYNCHRONIZE_CACHE command, which
is now require by some Operating Systems.  There are also fixes for the
lwIP bindings to improve non-blocking sockets and error codes.  The VFS has
some regressions fixed including the ability to statvfs the root.

All changes are listed below.

py core:
- modbuiltins: add core-provided version of input() function
- objstr: catch case of negative "maxsplit" arg to str.rsplit()
- persistentcode: allow to compile with complex numbers disabled
- objstr: allow to compile with obj-repr D, and unicode disabled
- modsys: allow to compile with obj-repr D and PY_ATTRTUPLE disabled
- provide mp_decode_uint_skip() to help reduce stack usage
- makeqstrdefs.py: make script run correctly with Python 2.6
- objstringio: if created from immutable object, follow copy on write policy

extmod:
- modlwip: connect: for non-blocking mode, return EINPROGRESS
- modlwip: fix error codes for duplicate calls to connect()
- modlwip: accept: fix error code for non-blocking mode
- vfs: allow to statvfs the root directory
- vfs: allow "buffering" and "encoding" args to VFS's open()
- modframebuf: fix signed/unsigned comparison pendantic warning

lib:
- libm: use isfinite instead of finitef, for C99 compatibility
- utils/interrupt_char: remove support for KBD_EXCEPTION disabled

tests:
- basics/string_rsplit: add tests for negative "maxsplit" argument
- float: convert "sys.exit()" to "raise SystemExit"
- float/builtin_float_minmax: PEP8 fixes
- basics: convert "sys.exit()" to "raise SystemExit"
- convert remaining "sys.exit()" to "raise SystemExit"

unix port:
- convert to use core-provided version of built-in import()
- Makefile: replace references to make with $(MAKE)

windows port:
- convert to use core-provided version of built-in import()

qemu-arm port:
- Makefile: adjust object-file lists to get correct dependencies
- enable micropython.mem_*() functions to allow more tests

stmhal port:
- boards: enable DAC for NUCLEO_F767ZI board
- add support for NUCLEO_F446RE board
- pass USB handler as parameter to allow more than one USB handler
- usb: use local USB handler variable in Start-of-Frame handler
- usb: make state for USB device private to top-level USB driver
- usbdev: for MSC implement SCSI SYNCHRONIZE_CACHE command
- convert from using stmhal's input() to core provided version

cc3200 port:
- convert from using stmhal's input() to core provided version

teensy port:
- convert from using stmhal's input() to core provided version

esp8266 port:
- Makefile: replace references to make with $(MAKE)
- Makefile: add clean-modules target
- convert from using stmhal's input() to core provided version

zephyr port:
- modusocket: getaddrinfo: Fix mp_obj_len() usage
- define MICROPY_PY_SYS_PLATFORM (to "zephyr")
- machine_pin: use native Zephyr types for Zephyr API calls

docs:
- machine.Pin: remove out_value() method
- machine.Pin: add on() and off() methods
- esp8266: consistently replace Pin.high/low methods with .on/off
- esp8266/quickref: polish Pin.on()/off() examples
- network: move confusingly-named cc3200 Server class to its reference
- uos: deconditionalize, remove minor port-specific details
- uos: move cc3200 port legacy VFS mounting functions to its ref doc
- machine: sort machine classes in logical order, not alphabetically
- network: first step to describe standard network class interface

examples:
- embedding: use core-provided KeyboardInterrupt object
2017-06-20 10:56:05 -07:00
Damien George 6213ad7f46 py: Convert mp_uint_t to size_t for tuple/list accessors.
This patch changes mp_uint_t to size_t for the len argument of the
following public facing C functions:

mp_obj_tuple_get
mp_obj_list_get
mp_obj_get_array

These functions take a pointer to the len argument (to be filled in by the
function) and callers of these functions should update their code so the
type of len is changed to size_t.  For ports that don't use nan-boxing
there should be no change in generate code because the size of the type
remains the same (word sized), and in a lot of cases there won't even be a
compiler warning if the type remains as mp_uint_t.

The reason for this change is to standardise on the use of size_t for
variables that count memory (or memory related) sizes/lengths.  It helps
builds that use nan-boxing.
2017-03-29 12:56:17 +11:00
Damien George c88cfe165b py: Use size_t as len argument and return type of mp_get_index.
These values are used to compute memory addresses and so size_t is the
more appropriate type to use.
2017-03-23 16:17:40 +11:00
Scott Shawcroft 75d6abe3bb Correct name of mp_raise_NotImplementedError to make error name. 2017-02-24 16:46:38 +01:00
Scott Shawcroft 12fa5b3a66 Switch exception throwing to mp_raise helpers. It saves a little code space each time to share the call. 2017-02-24 15:13:07 +01:00
Damien George 89267886cc py/objlist: For list slice assignment, allow RHS to be a tuple or list.
Before this patch, assigning anything other than a list would lead to a
crash.  Fixes issue #2886.
2017-02-20 15:09:59 +11:00
Damien George e6003f466e py: De-optimise some uses of mp_getiter, so they don't use the C stack.
In these cases the heap is anyway used to create a new object so no real
need to use the C stack for iterating.  It saves a few bytes of code size.
2017-02-16 19:11:34 +11:00
Damien George ae8d867586 py: Add iter_buf to getiter type method.
Allows to iterate over the following without allocating on the heap:
- tuple
- list
- string, bytes
- bytearray, array
- dict (not dict.keys, dict.values, dict.items)
- set, frozenset

Allows to call the following without heap memory:
- all, any, min, max, sum

TODO: still need to allocate stack memory in bytecode for iter_buf.
2017-02-16 18:38:06 +11:00
Damien George 58d9eeb8d9 py/objlist: Convert mp_uint_t to size_t where appropriate. 2017-02-16 16:51:16 +11:00
Damien George 7d0d7215d2 py: Use mp_raise_msg helper function where appropriate.
Saves the following number of bytes of code space: 176 for bare-arm, 352
for minimal, 272 for unix x86-64, 140 for stmhal, 120 for esp8266.
2016-10-17 12:17:37 +11:00
Paul Sokolovsky c4a8004933 py: Get rid of assert() in method argument checking functions.
Checks for number of args removes where guaranteed by function descriptor,
self checking is replaced with mp_check_self(). In few cases, exception
is raised instead of assert.
2016-08-12 22:39:03 +03:00