Commit Graph

19 Commits

Author SHA1 Message Date
Damien George 4ebdb1f2b2 py: Be more specific with MP_DECLARE_CONST_FUN_OBJ macros.
In order to have more fine-grained control over how builtin functions are
constructed, the MP_DECLARE_CONST_FUN_OBJ macros are made more specific,
with suffix of _0, _1, _2, _3, _VAR, _VAR_BETEEN or _KW.  These names now
match the MP_DEFINE_CONST_FUN_OBJ macros.
2016-10-21 16:26:01 +11:00
neilh10 1be0fde45c stmhal: Enable two USB phys to be supported together.
This is refactoring to enable support for the two USB PHYs available on
some STM32F4 processors to be used at the same time. The F405/7 & F429
have two USB PHYs, others such as the F411 only have one PHY.

This has been tested separately on a pyb10 (USB_FS PHY) and F429DISC
(USB_HS PHY) to be able to invoke a REPL/USB.  I have modified a PYBV10
to support two PHYs.

The long term objective is to support a 2nd USB PHY to be brought up as a
USB HOST, and possibly a single USB PHY to be OTG.
2015-12-09 09:56:36 +00:00
Damien George 55d6218b9a stmhal: Properly define pyb.usb_mode() semantics. 2015-02-13 14:02:51 +00:00
Damien George 39ce2db181 stmhal: Add "CDC" option to pyb.usb_mode, for CDC device only. 2015-02-13 14:02:51 +00:00
Damien George d39c7aa517 stmhal: Add Python-configurable USB HID mode.
Different HID modes can be configured in Python.  You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
Damien George 5cbc9e0db0 stmhal: Reduce coupling between USB driver and readline.
This makes it easier to re-use readline.c and pyexec.c from stmhal in
other ports.
2014-11-27 16:58:31 +00:00
Sven Wegener 0e0ae97975 stmhal: Declare variables extern in include files
Else we end up with several instances of the variable.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2014-11-05 22:52:51 +00:00
Damien George ccacdf44b6 stmhal: Clean up reset/soft-reset code; fix bug init'ing VCP exc.
Make a clearer distinction between init functions that must be done
before any scripts can run (xxx_init0) and those that can be safely
deferred (xxx_init).

Fix bug initialising USB VCP exception.  Addresses issue #788.

Re-order some init function to improve reliability of
reset/soft-reset.
2014-08-04 11:09:51 +01:00
Damien George 8362bffb2e stmhal: Document behaviour of usb_vcp_recv_byte. 2014-08-03 17:30:26 +01:00
Damien George 3c4db9f91c stmhal: Add USB_VCP class/object, for direct USB VCP control.
Before, pyb.stdin/pyb.stdout allowed some kind of access to the USB VCP
device, but it was basic access.

This patch adds a proper USB_VCP class and object with much more control
over the USB VCP device.  Create an object with pyb.USB_VCP(), then use
this object as if it were a UART object.  It has send, recv, read,
write, and other methods.  send and recv allow a timeout to be specified.

Addresses issue 774.
2014-07-31 10:30:42 +01:00
Damien George 951ed9d02f stmhal: Fix REPL printing by cooking output sent to stdout_obj.
Recent changes to builtin print meant that print was printing to the
mp_sys_stdout_obj, which was sending data raw to the USB CDC device.
The data should be cooked so that \n turns into \r\n.
2014-07-20 13:57:43 +01:00
Damien George 6d197740cf stmhal: Stop USB before entering DFU by software. 2014-05-21 19:25:34 +01:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George 3996611c1b stmhal: Add home/end cursor support in readline.
Home/end work in picocom and screen (different codes in those 2
programs).  Also, CTRL-A (for non-empty liny) and CTRL-E act as
home/end.
2014-04-03 23:30:24 +01:00
Damien George 038df43183 stmhal: Implement selector for USB device mode; improve boot up.
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.

Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected.  Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
2014-03-30 00:00:15 +00:00
Damien George 2fb37847a7 stmhal: Tidy up USB CDC+MSC device some more. 2014-03-22 13:21:58 +00:00
Damien George 8913c04831 stmhal: Add support for USB MSC device.
This gives a functioning, independent MSC device.
2014-03-21 23:32:01 +00:00
Damien George 07174c6fca stmhal: Fix escape sequences in USB CDC input. 2014-03-15 12:53:51 +00:00
Damien George b30c02afa0 stmhal: Get USB enumerating a CDC device.
Enumerates CDC device over USB, but doesn't transmit/receive yet.
2014-03-14 00:30:37 +00:00