djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,362 Commits 21 Branches 274 Tags 785 MiB
57fde2e07b
Commit Graph

1169 Commits

Author SHA1 Message Date
Jeff Epler
57fde2e07b sdcardio: implement new library for SD card I/O 
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot

This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
 2020-06-26 11:50:23 -05:00
Jeff Epler
1d2cc0b968 I2CPeripheral: Rename class and its module 
This is an incompatible change.
 2020-06-25 11:44:19 -05:00
Jeff Epler
076a96ccc6
Merge pull request #3046 from jepler/same51 
Add basic SAM E54  support and SAM E54 Xplained board
 2020-06-25 06:55:27 -05:00
Jeff Epler
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices 
Compute USB_DEVICES instead of requiring it to be specified
 2020-06-24 13:31:56 -05:00
Jeff Epler
f232aef786 supervisor.mk: Compute USB_DEVICES; remove from boards and ports 
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
 2020-06-23 12:59:01 -05:00
Jeff Epler
38659b566c atmel-samd: Finish disabling USB MIDI and/or HID on certain boards 2020-06-23 10:56:27 -05:00
Jeff Epler
d5074220a8 atmel-samd: Add SAM E54 Xplained board 
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
 2020-06-23 10:41:48 -05:00
Jeff Epler
da733c01da atmel-samd: Add support for SAM E54 family MCUs 
This introduces the new macro SAM_D5X_E5X.  This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
 2020-06-23 10:41:48 -05:00
Scott Shawcroft
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board 
PID request for a new board configuration
 2020-06-22 15:09:42 -07:00
Scott Shawcroft
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay 
delay 1ms on SAMD51 when reading processor voltage
 2020-06-22 14:29:43 -07:00
Jeff Epler
d43449a6d6 sparkfun samd51 thing plus: Fix board.I2C() 
This had the SDA and SCL pins transposed, so nothing worked.
 2020-06-22 10:45:27 -05:00
Jeff Epler
a770b5a919 never_reset_pin: Move pin validity check before first use of pin number 2020-06-22 10:45:27 -05:00
Jeff Epler
6638bc32c3 samd: Makefile: Regularize whitespace 2020-06-22 10:45:27 -05:00
Jeff Epler
a580f0f1c4 _pew: move to common-hal 
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10).  Move it.

There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
 2020-06-22 10:45:27 -05:00
Dan Halbert
1687c8b1e3 delay 1ms on SAMD51 when reading processor voltage 2020-06-19 15:25:04 -04:00
Florin Trutiu
b316549590 Added the new assigned VID/PID pair 2020-06-19 19:26:29 +03:00
Florin Trutiu
178be2e3c9 loc_ber_m4_base_board 2020-06-19 18:56:20 +03:00
Jeff Epler
3c3cad5ae6 docs: Improve 5.0.x <-> main branch doc linkrot 
This improves, but does not entirely fix, the broken links that result
from the autoapi change.  It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
 2020-06-14 11:12:35 -05:00
Diego Elio Pettenò
dd5d7c86d2 Fix up end of file and trailing whitespace. 
This can be enforced by pre-commit, but correct it separately to make it easier to review.
 2020-06-03 10:56:35 +01:00
Scott Shawcroft
796373b8be
A number of small ESP32S2 fixes: 
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
 2020-05-28 15:43:55 -07:00
Dan Halbert
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio 
Finish digitalio and pin use tracking for ESP32S2
 2020-05-26 19:18:45 -04:00
Scott Shawcroft
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi 
fix racing issue for SAMD when executing WFI
 2020-05-26 14:54:24 -07:00
Scott Shawcroft
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894 
Add an increment to tcc_refcount to allow deinit to work correctly
 2020-05-26 14:39:59 -07:00
Scott Shawcroft
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0 
Add support for Fluff M0
 2020-05-26 13:18:55 -07:00
Scott Shawcroft
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio 2020-05-26 13:09:57 -07:00
Radomir Dopieralski
4974c933b1 Fix swapped SCK and MISO in Fluff M0 2020-05-26 03:29:05 +02:00
hathach
e79340601f fix racing issue for SAMD when executing WFI 2020-05-25 20:51:02 +07:00
Jeff Epler
5cffd7e88d trinket_m0_haxpress: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
eb85304d04 escornabot: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
03866c0598 meowmeow: disable modules to make build fit with upcoming translations 2020-05-23 20:41:25 -05:00
Jeff Epler
2ed40075a5 pyruler: disable RTC to make build fit with upcoming translations 2020-05-23 20:36:33 -05:00
Radomir Dopieralski
4c01ddcbab Add support for Fluff M0 2020-05-22 18:51:12 +02:00
DavePutz
2e05f628f0
Add an increment to tcc_refcount to allow deinits to work properly 2020-05-21 11:08:26 -05:00
Scott Shawcroft
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio 2020-05-21 08:52:39 -07:00
jason
4f54514be4 Initial version 2020-05-20 21:11:06 -05:00
Scott Shawcroft
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio 2020-05-20 10:48:27 -07:00
Scott Shawcroft
fd0420d432
Update digitalio api for other ports 2020-05-20 09:23:42 -07:00
Scott Shawcroft
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2 
Add initial ESP32S2 support
 2020-05-19 12:53:23 -07:00
Scott Shawcroft
acf4b1bede
Remove reverse methods from per-board defs 2020-05-19 11:43:57 -07:00
Scott Shawcroft
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins 2020-05-19 10:55:02 -07:00
Scott Shawcroft
2c2b53303d
Merge pull request #2837 from k0d/serial-debug 
Add support for a debug console, such as ST-Link VCP.
 2020-05-18 18:13:31 -07:00
Mark Olsson
007c92ee6a Enable showing the console on a debug uart 2020-05-19 02:02:52 +02:00
Scott Shawcroft
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2 2020-05-18 16:46:41 -07:00
Scott Shawcroft
9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode 
Add bytearray.decode() for CPython compatibility
 2020-05-18 14:38:45 -07:00
Dan Halbert
e175a64036
disable rotaryio in CPX crickit 2020-05-15 20:35:12 -04:00
Scott Shawcroft
8edb8e87c8
Turn reverse methods off for trinket haxpress 2020-05-15 17:22:22 -07:00
Scott Shawcroft
86f865afe0
Turn reverse methods off for cpx_crickit 2020-05-15 16:42:22 -07:00
Scott Shawcroft
6aaab005c5
Initial ESP32S2 port. 
Basic blinky works but doesn't check pins.
 2020-05-15 15:36:16 -07:00
Dan Halbert
a3ca9401b4
Shrink crickit build 2020-05-15 18:29:37 -04:00
Scott Shawcroft
0d8bca92e2
Merge pull request #2810 from dherrada/master 
Pyi integration
 2020-05-15 10:31:05 -07:00