djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
12,642 Commits 21 Branches 274 Tags 785 MiB
577a3c4192
Commit Graph

44 Commits

Author SHA1 Message Date
finefoot
e10a044d7c docs/esp8266/tutorial: Change flash mode from dio to dout. 
For some boards, even -fm dio is too fast and they require -fm dout.  This
commit links to the esptool wiki about available flash modes and changes
dio to dout.
 2021-07-07 21:15:58 +10:00
Mike Causer
97fee47716 docs/esp8266: Add SSD1306 to quickref and tutorial. 2021-05-14 12:04:21 +10:00
Damien George
2bf1beef5c docs/esp8266: Add instructions on entering programming mode manually. 
This adds to the ESP8266 tutorial instructions explaining which pins to
pull low to enter programming mode.

Commit made originally by @ARF1 in #2910.

Signed-off-by: Damien George <damien@micropython.org>
 2021-05-04 14:24:40 +10:00
Jesse Andrews
c4ea4c1810 docs/esp8266: In TCP tutorial, add HTTP response code and content-type. 
Show how to send an HTTP response code and content-type.  Without the
response code Safari/iOS will fail.  Without the content-type Lynx/Links
will fail.
 2020-02-03 23:50:09 +11:00
Damien George
90c524c114 docs: Remove spaces on lines that are empty. 2019-12-04 15:02:54 +11:00
Thiago Paes
5463ab6df6 docs/esp8266/tutorial: Make http_get sample function self contained. 2019-10-16 13:52:04 +11:00
Mike Causer
6323cbda4f docs/esp8266: Add tutorial for APA102 LEDs. 2019-05-07 11:45:10 +10:00
Damien George
b3e013f60e docs: Unify all the ports into one set of documentation. 
With this commit there is now only one entry point into the whole
documentation, which describes the general MicroPython language, and then
from there there are links to information about specific platforms/ports.

This commit doesn't change content (almost, it does fix a few internal
links), it just reorganises things.
 2018-10-01 13:53:53 +10:00
Olivier Ortigues
298b325f3e docs/esp8266: Add a note concerning GPIO16 pull capabilities. 2018-02-15 11:15:12 +11:00
Olivier Ortigues
d072573226 docs/esp8266: Update PWM doc regarding clipping of min/max values. 2018-02-15 11:14:34 +11:00
Ryan Finnie
1e2b78111b docs/esp8266/tutorial: Fix typo, change -> changed. 2017-12-13 17:30:02 +11:00
Gabe
9e0cdb22f1 docs/esp8266/tutorial: Update neopixel with example of using 4 bbp. 2017-10-04 10:35:22 +11:00
Matthew Brener
d003daee06 docs/esp8266/tutorial: Fix typo, "its" to "it's" in powerctrl.rst. 2017-07-24 10:33:03 +10:00
Damien George
0a54b6dce9 docs/esp8266/tutorial/intro: Fix some grammatical typos. 2017-06-26 15:12:48 +10:00
Paul Sokolovsky
beb94b6efc docs/esp8266/tutorial/intro: Sphinx requires blank lines around literal blocks. 
At least, Sphinx 1.3.6.
 2017-06-23 22:04:33 +03:00
Paul Sokolovsky
51668dffaa docs/esp8266/tutorial/intro: Discourage use of 512kb firmwares. 
This follows similar warnings in other parts of docs.
 2017-06-23 22:00:40 +03:00
Paul Sokolovsky
272a5d95e0 docs/esp8266: Consistently replace Pin.high/low methods with .on/off. 2017-05-30 07:36:25 +03:00
Paul Sokolovsky
a1c39ffb69 docs/esp8266/tutorial/intro: Reword section on flash size requirement. 
Give a clearly dissuading tone on end users trying 512KB version
- it has to many end-usery features lacking.
 2017-04-14 01:12:04 +03:00
James Ouyang
e73a0b944f docs/esp8266/tutorial: Update since esptool 1.3 added Python 3 support. 
esptool 1.3 now supports both Python 2.7 and 3.4+.
Updated github link to now-official espressif repo.
 2017-03-07 18:23:24 +11:00
Damien George
3217bbe491 docs/esp8266/tutorial: Specify the baudrate in picocom example command. 2017-02-07 16:58:43 +11:00
Max
e1f495a4bd docs/esp8266/tutorial: Close socket after reading page content. 2017-01-04 11:15:02 +11:00
Andrew Mulholland
71ff0b549d docs/esp8266/tutorial: Update intro to add Getting the firmware section. 
Add a "Getting the firmware" section to better describe how to get hold of
the MicroPython firmware, especially if you have a 512kb module.
 2016-12-30 14:27:02 +11:00
Paul Sokolovsky
5630778f0f esp8266: Update docs for esptool 1.2.1/SDK 2.0 (--flash_size=detect). 2016-11-08 04:52:07 +03:00
Paul Sokolovsky
5c3d75c937 docs/esp8266: Update for new WebREPL setup procedure. 2016-11-06 10:02:33 +03:00
Damien George
13c5a228c9 docs/esp8266: Update quickref and tutorial for OneWire/DS18X20 driver. 2016-08-29 12:52:50 +10:00
Paul Sokolovsky
5e01fb01b3 docs/esp8266/intro: Add command to install esptool.py 1.0.1 via pip. 
It used a standard BootROM programming algo and may be useful as a
fallback.
 2016-08-10 21:40:40 +03:00
Paul Sokolovsky
2146cdab5e docs/esp8266/tutorial/pins: Fix typo in commands for pin input mode. 2016-08-09 21:13:27 +03:00
Paul Sokolovsky
3e5534caf7 docs/esp8266/intro: Focus on hazards of unearthed power wrt electronics. 2016-08-07 22:41:34 +03:00
Paul Sokolovsky
d2cab0b7be docs/esp8266/tutorial/intro: Add anchor for link from quickeref. 2016-08-07 22:16:40 +03:00
Paul Sokolovsky
a9923d190e docs/esp8266/intro: Add troubleshooting section. 
Tries to summarize most of the issues we've seen so far.
 2016-08-07 17:28:33 +03:00
Paul Sokolovsky
919c54f750 docs/esp8266/intro: Rename to "Getting started" from "Introduction". 
People tend to skip introductions (everyone knows what esp8266 is, right?),
so try to do A/B testing with a title inviting to read it.
 2016-08-07 17:28:23 +03:00
Paul Sokolovsky
1966745689 esp8266/tutorial/intro: Reword para abou -fm dio switch. 
Not all NodeMCU boards require it.
 2016-08-07 16:31:09 +03:00
Mike Causer
ce166e6b68 docs: Spelling mistakes 2016-08-02 11:17:46 +03:00
Mike Causer
b4564841b6 docs: Add DHT to ESP8266 Quick Ref and Tutorial 2016-08-01 14:39:57 +03:00
Ben Hagen
0b913bd09f docs/esp8266/tutorial/network_basics: Minor typo fix, ap becomes ap_if. 2016-06-06 10:08:30 +01:00
Damien George
9b4502b7e8 docs/esp8266/tutorial: Fix typo in do_connect() network example. 
Fixes issue #2065.
 2016-05-11 13:40:28 +01:00
Paulus Schoutsen
c156e89379 Fix ESP8266 Network tutorial 
The socket should either connect to `addr` or `addr_info[0][-1]`. Not to `addr[0][-1]`.
 2016-05-07 23:24:24 -07:00
Damien George
56fd33a6dd docs/esp8266/tutorial: Change name of ESP8266 firmware to match actual. 2016-05-03 16:42:52 +01:00
Paul Sokolovsky
c68c327310 docs/esp8266/tutorial/repl: Reword description of initial WebREPL setup a bit. 2016-05-03 18:40:16 +03:00
Paul Sokolovsky
1f396c58d9 docs/esp8266/tutorial/repl: Suggest using hosted WebREPL client. 
At http://micropython.org/webrepl .
 2016-05-03 18:35:43 +03:00
Damien George
5d05993f10 esp8266/tutorial: Mention that esptool is available via pip. 2016-05-03 14:05:50 +01:00
Damien George
8af64bcf2b docs/esp8266/tutorial: Update pins tutorial to reflect changes in API. 2016-05-03 13:56:15 +01:00
Damien George
879bc4197a docs/esp8266: Add ESP8266 tutorial. 2016-05-03 01:39:04 +01:00
Paul Sokolovsky
5c8147528e docs/esp8266/tutorial: Add tutorial placeholder page. 2016-04-22 22:37:02 +03:00