13be10ef14
rename function to avoid confusion
2022-07-13 13:28:51 -05:00
5c6ee20ca5
on esp32 need to initialize nvs before starting wifi
...
Also, change error handling so that the esp-idf error number
is shown in the traceback in the case of an error.
This allows scanning & connecting to work. I didn't try requests yet.
2022-07-13 11:57:38 -05:00
f620c2901c
Set a small but working heap size for esp32 without psram
2022-07-13 11:10:00 -05:00
ea52ca66dc
Disable SPIRAM bankswitch on esp32
...
We don't use this facility, which was reserving the last 256kiB of
psram.
2022-07-13 10:56:58 -05:00
953f44b46e
Fix spiram limit calculation on esp32
...
esp32 places the psram start at SOC_EXTRAM_DATA_LOW and it can extend
up to SOC_EXTRAM_DATA_SIZE. This is different than esp32-s2 and later,
which place the end at EXTRAM_DATA_HIGH and the limitation of
SOC_EXTRAM_DATA_SIZE was not previously identified as important.
Additionally, the esp32 has a reserved area within himem which was
not being accounted for.
With this change, the Feather ESP32 V2 feather can be used via thonny,
and the other "quick memory corruption tests" I was performing
also all succeed instead of failing.
Before this change, the incorrect address being used for spiram was
0x3fa00000..0x3fc00000 (2MiB). Now, it's 0x3f800000..0x3f9c0000 (1.75MiB)
due to the reserved area and the changed start address.
This is intended to be a no-effect change for other espressif chips besides
original esp32.
2022-07-13 10:52:15 -05:00
afbaa2eb6c
decode_backtrace: Show even more information
...
addr2line can show information about how functions were inlined,
including function names
Typical new output:
```
0x400dec57: mp_obj_get_type at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:68
(inlined by) mp_obj_print_helper at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:133
(inlined by) mp_obj_print_helper at /home/jepler/src/circuitpython/ports/espressif/../../py/obj.c:114
0x400e1a25: fun_builtin_1_call at /home/jepler/src/circuitpython/ports/espressif/../../py/objfun.c:75
0x400dd016: mp_call_function_n_kw at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:665
0x400eac99: mp_execute_bytecode at /home/jepler/src/circuitpython/ports/espressif/../../py/vm.c:936
0x400e1ae9: fun_bc_call at /home/jepler/src/circuitpython/ports/espressif/../../py/objfun.c:297 (discriminator 4)
0x400dd016: mp_call_function_n_kw at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:665
0x400dd03a: mp_call_function_0 at /home/jepler/src/circuitpython/ports/espressif/../../py/runtime.c:638
0x40117c03: parse_compile_execute at /home/jepler/src/circuitpython/ports/espressif/../../shared/runtime/pyexec.c:146
0x4011800d: pyexec_friendly_repl at /home/jepler/src/circuitpython/ports/espressif/../../shared/runtime/pyexec.c:734
0x400eeded: run_repl at /home/jepler/src/circuitpython/ports/espressif/../../main.c:823
(inlined by) main at /home/jepler/src/circuitpython/ports/espressif/../../main.c:922
0x400ef5e3: app_main at /home/jepler/src/circuitpython/ports/espressif/supervisor/port.c:410
0x401bb461: main_task at /home/jepler/src/circuitpython/ports/espressif/build-adafruit_feather_esp32_v2/esp-idf/../../esp-idf/components/freertos/port/port_common.c:141
```
2022-07-12 16:28:33 -05:00
9d5b04ebc4
Merge pull request #6577 from NathanY3G/uf2-family-id-for-stm32f405
...
stm: Make family IDs consistent with TinyUF2
2022-07-12 13:38:40 -07:00
23bbb19138
Merge remote-tracking branch 'adafruit/main' into websocket_serial
2022-07-12 13:15:38 -07:00
d9f6e99942
Fix RP2040 UART
...
It couldn't receive more than 32 bytes in while checking in_waiting
because in_waiting didn't turn interrupts back on correctly.
Fixes #6579
2022-07-11 13:36:44 -07:00
d8447de0b0
Merge pull request #6578 from xuhow/picoed_led_status
...
Picoed led status
2022-07-11 13:23:02 -07:00
c56f363a23
Merge pull request #6572 from todbot/wifi-tx-power-float
...
Fix #6559
2022-07-11 13:08:11 -07:00
e7703e89c9
Merge pull request #6567 from jepler/update-ulab-509
...
update ulab to 5.0.9
2022-07-11 13:05:41 -07:00
08b4a64bd2
Update the PID
2022-07-11 08:39:10 -07:00
be3482ff05
Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed
2022-07-11 16:51:06 +08:00
f22f4f896a
stm: Make family IDs consistent with TinyUF2
...
This should allow UF2 images for STM32F405 boards to be flashed by
TinyUF2.
2022-07-10 21:34:07 +02:00
a658007673
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:26 -07:00
22e061ba35
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:18 -07:00
98692150ac
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:12 -07:00
f464ec3047
Update ports/espressif/common-hal/wifi/Radio.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-07-09 22:17:02 -07:00
9d77a36fbf
update samd-peripherals submodule
2022-07-08 22:47:36 -04:00
bc14b7ad47
Fix the display on the esp box lite
2022-07-08 15:40:59 -07:00
2c7ad7a39f
make translate and pre-commit formatting fixes
2022-07-08 16:53:53 -04:00
3c093713dc
Merge branch 'esp_box_lite' of https://github.com/tannewt/circuitpython into esp_box_lite
2022-07-08 13:46:14 -07:00
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
d869b441f4
further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR
2022-07-08 15:27:00 -04:00
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
afbf4de071
Uncomment or remove debugging changes
2022-07-08 12:53:25 -04:00
c3cd32e773
CPU freq to 240 MHz, redo sdkconfigs
2022-07-08 10:50:00 -04:00
75208573f4
tweak sdkconfig; add temp logging to mp_make_function_from_raw_code
2022-07-08 09:53:29 -04:00
d3e1d1b104
Fix #6559
2022-07-07 19:42:11 -07:00
ab3e786611
disable additional module on matrixportal_m4
2022-07-07 20:00:12 -05:00
c4dfd8e30a
Fix default BOARD setting & messages
...
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
2022-07-07 17:17:15 -05:00
601eb91b89
Disable gifio on matrixportal to reclaim flash space
2022-07-07 17:00:00 -05:00
4e88d795e1
Thonny causing crash emitglue.c:199:
2022-07-06 23:01:19 -04:00
4c20b3cb63
Merge pull request #6564 from adafruit/7.3.x
...
7.3.x
2022-07-06 15:25:24 -04:00
d83720f659
Tweak display init
2022-07-05 17:02:52 -07:00
cd77517b2f
Add build for ESP32-S3 Box Lite
2022-07-05 16:35:42 -07:00
18d7165e0f
Merge pull request #6550 from crackmonkey/rp2040-wait-pin-bounds
...
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-05 12:56:14 -07:00
dce9396fe3
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-02 14:32:20 -07:00
07b2697ae3
WIP websocket to serial
2022-07-01 16:57:10 -07:00
c3cf9ba9ce
remove wifi max from sdkconfig
2022-07-01 14:50:47 -07:00
aaeda97818
update PHY section, correct name
2022-07-01 14:50:47 -07:00
aa53d36934
setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5
2022-07-01 14:50:47 -07:00
7e367eeb58
Update "D" mappings
2022-07-01 14:50:47 -07:00
d4b26daf1b
correct creator and creation IDs
2022-07-01 14:50:47 -07:00
6c7faf0eba
Change USB VID & PID to Creator and Creation IDs
2022-07-01 14:50:47 -07:00
3253ae2503
tested and corrected several pins
2022-07-01 14:50:47 -07:00
f10fa566aa
REPL works. Based on QTPYC3.
2022-07-01 14:50:47 -07:00
a3070f6c2a
Changes to Pin Mappings
2022-07-01 14:50:46 -07:00
b37236f83f
C3 does not have PSRAM
2022-07-01 14:50:46 -07:00
af629ab180
Add assumed PID value
2022-07-01 14:50:46 -07:00
c1e6003d26
remove comment that breaks {ID Checker
2022-07-01 14:50:46 -07:00
9bae8549c5
add UART RX TX to mpconfigboard
2022-07-01 14:50:46 -07:00
6763b7b968
add A5
2022-07-01 14:50:46 -07:00
bcf27e146b
fix build break and add io 20/21
2022-07-01 14:50:46 -07:00
dc1c86738a
Initial pin mapping pass
2022-07-01 14:50:46 -07:00
fd4695d0f2
Gettting started with pin mapping.
2022-07-01 14:50:46 -07:00
8814ee03f1
Merge pull request #6542 from todbot/wifi-tx-power
...
Add wifi.radio.tx_power
2022-07-01 14:09:08 -04:00
7589e53fea
WIP websocket accept and hashlib
2022-07-01 10:18:33 -07:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
187f156ac7
Merge pull request #6534 from tannewt/esp_wdt_safe_mode
...
Safe mode when ESP interrupt watchdog fires
2022-06-30 22:56:35 -04:00
63873e2c14
Merge pull request #6528 from tannewt/cp_webserver
...
Add web workflow to ESP boards
2022-06-30 22:53:47 -04:00
698d563dcf
adust wifi.radio.tx_power to be x4 (in db) as mentioned in #6540
2022-06-30 15:33:03 -07:00
2a563cc8ba
first cut at wifi.radio.tx_power
2022-06-30 15:10:16 -07:00
71358a4a63
Merge pull request #6526 from xuhow/elecfreaks_picoed
...
Add some frozen libraries to elecfreaks_picoed
2022-06-30 11:53:59 -07:00
b0efd130c9
ESP32 REPL working through debug UART
2022-06-29 23:19:36 -04:00
3be3e89d82
Merge branch 'main' into cp_webserver
2022-06-29 14:01:32 -07:00
c3a149c14a
Merge pull request #6533 from tannewt/fix_connect_crash
...
Fix auto-wifi created crash
2022-06-29 16:51:33 -04:00
d42c811fb9
Safe mode when ESP interrupt watchdog fires
...
This makes us enter safe mode when sleep on the S3 fails. The
task watchdog is used for the user watchdog.
2022-06-29 12:31:18 -07:00
8dc8265275
Fix auto-wifi created crash
...
The wifi event_handler runs on the other core so we need to be
careful when calling into CP APIs.
Fixes #6503
2022-06-29 11:53:10 -07:00
1f065a313c
Update with startup fix instead of revert
2022-06-29 11:12:29 -07:00
1599844b82
Add some frozen libraries to elecfreaks_picoed
2022-06-29 15:03:29 +08:00
780c4963cb
wip; change never-ever reset pin mechanism
2022-06-28 23:06:49 -04:00
a8bb3eb557
Update to newer 4.4 branch
2022-06-28 15:38:55 -07:00
ca64950503
wip fixes
2022-06-28 18:32:08 -04:00
131d70cebd
restore traceback to matrixportal build
2022-06-28 16:10:55 -04:00
41039445c9
Clean up and add docs
2022-06-27 13:39:09 -07:00
7acc5ebeb9
Add logo for going to home. Fix origin check
2022-06-27 13:39:09 -07:00
3cd05291d0
Static files + welcome page
2022-06-27 13:39:09 -07:00
7543dd9af0
CORS works and autoreload too
2022-06-27 13:39:08 -07:00
92593aa7a1
Fix bind, remove hard coded ip
2022-06-27 13:34:13 -07:00
4f0a7aedfd
WIP adding devices.json and auth
2022-06-27 13:34:13 -07:00
32478345f8
more tweaks
2022-06-27 13:34:13 -07:00
0882cbf823
web server kinda works
2022-06-27 13:34:13 -07:00
61d0f7947b
WIP doesn't flush response before closing
2022-06-27 13:34:13 -07:00
301f3e0456
Start of web server
2022-06-27 13:34:13 -07:00
55784c93de
wip; compiles
2022-06-26 21:22:22 -04:00
02069eb0b5
wip
2022-06-23 15:59:06 -04:00
a055113ed5
Merge pull request #6520 from dhalbert/7.3.1-to-main
...
Merge 7.3.1 changes to main
2022-06-23 11:15:40 -07:00
b0219f9b5b
Merge pull request #6518 from xorbit/rp2040-shim
...
Add board Silicognition LLC RP2040-Shim
2022-06-23 11:04:40 -04:00
feb1d903f7
merge 7.3.1 to main
2022-06-23 09:07:49 -04:00
897297bba4
Merge pull request #6516 from Neradoc/setup-default-ports-hiibot-iots2
...
Implement default busses to IOTS2
2022-06-22 09:46:08 -07:00
0b80c62400
Merge branch 'adafruit:main' into rp2040-shim
2022-06-22 11:40:02 -05:00
25206a8aff
Merge pull request #6513 from dhalbert/7.3.x-6495-backport-ble-disconnect-check
...
Test for a BLE disconnect while reading
2022-06-22 09:38:24 -07:00
ba72287db4
Implement default ports to IOTS2
2022-06-22 07:24:27 +02:00
e8023f33a9
Test for a BLE disconnect while reading
2022-06-21 19:59:23 -04:00
1ad3daf75b
Fix declaration of print_wakeup_cause
2022-06-21 19:56:15 -04:00
803c18c71f
Uncommented call to print_wakeup_cause
2022-06-21 19:56:15 -04:00
d3903bf2f4
Fix for Issue #6478
2022-06-21 19:56:15 -04:00
562c73bcc7
Merge pull request #6458 from blues/swan_r5_3v3_enable
...
fix(swan_r5): 3v3 was enabled but then immediately reset.
2022-06-21 13:56:58 -07:00
019a160983
exposes `DigitalInOutPin` instances on the board, initialized and reserved.
2022-06-20 14:46:58 -07:00
7f968f18c0
move frozen adafruit_circuitplayground to express subdirectory
2022-06-20 16:55:10 -04:00
c27ecc9bb1
Merge pull request #6495 from DavePutz/issue_6451
...
Test for a BLE disconnect while reading
2022-06-17 09:37:07 -07:00
f0bf14094b
Update samd-peripherals to fix SPI DMA problem
2022-06-17 10:59:59 -04:00
f590c7cc9a
Merge pull request #6485 from electrolama/add-board-electrolama-minik
...
Add custom board: Electrolama minik (RP2040 module)
2022-06-17 09:01:04 -04:00
cdc7140318
Test for a BLE disconnect while reading
2022-06-16 14:56:18 -05:00
894cea217d
Merge pull request #6486 from DavePutz/issue_6478
...
Fix for Issue #6478
2022-06-15 09:43:09 -07:00
8668dee3df
Fix declaration of print_wakeup_cause
2022-06-14 20:51:07 -05:00
669e45497c
Uncommented call to print_wakeup_cause
2022-06-14 13:27:15 -05:00
ad56a16c2d
Add board Silicognition LLC RP2040-Shim
2022-06-14 11:28:41 -06:00
015e95807a
Fix for Issue #6478
2022-06-14 12:14:05 -05:00
9fbad229c0
Add custom board: Electrolama minik (RP2040)
2022-06-14 15:51:10 +01:00
0c418e98b1
Merge remote-tracking branch 'adafruit/main' into auto_wifi
2022-06-13 15:44:43 -07:00
dc794f91c0
Speed up auto-wifi with wrong password
...
This adds basic timeout support to connect by preventing subsequent
retries if over time. The first connect may still take more than
the timeout.
2022-06-13 15:38:19 -07:00
1a3d2a5b5e
Shrink nrf52833 builds
...
Make them CIRCUITPY_FULL_BUILD = 0 and rework the boards to have
the same modules enabled (ish.)
Also make ZLIB require FULL_BUILD and disable advanced `micropython`
module APIs by default on all builds.
2022-06-13 15:36:15 -07:00
b191075ab8
Better length checks
2022-06-13 09:18:42 -07:00
ab346a27fc
Merge pull request #6468 from blues/stm32_rtc
...
feat(swan_r5): adds a basic STM32 RTC implementation.
2022-06-13 09:00:09 -07:00
39b8c2c94e
Merge pull request #6453 from KurtE/ESP32_UART
...
ESP32 USE uart_param_config
2022-06-13 08:56:32 -07:00
beafbc7c60
enable RTC for all STM32 devices
2022-06-10 17:37:33 -07:00
6ee8e00936
fix(stm32): correct include path after translation header was moved
2022-06-10 17:37:33 -07:00
a889638468
feat(swan_r5): adds a basic RTC implementation.
2022-06-10 17:37:32 -07:00
6e090c96a5
squeeze some specialized builds
2022-06-10 16:24:52 -04:00
6446010753
Wi-Fi autoconnect and title bar status
...
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD
in `/.env`. When both are defined, CircuitPython will attempt to
connect to the network even when user code isn't running. If the
user code attempts to a network with the same SSID, it will return
immediately. Connecting to another SSID will disconnect from the
auto-connected network. If the user code initiates the connection,
then it will be shutdown after user code exits. (Should match <8
behavior.)
This PR also reworks the default displayio terminal. It now supports
a title bar TileGrid in addition to the (newly renamed) scroll area.
The default title bar is the top row of the display and is positioned
to the right of the Blinka logo when it is enabled. The scroll area
is now below the Blinka logo.
The Wi-Fi auto-connect code now uses the title bar to show its
state including the IP address when connected. It does this through
the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s>
is the title bar string. This is commonly supported by terminals
so it should work over USB and UART as well.
Related to #6174
2022-06-09 14:55:54 -07:00
42f05a32a3
Merge branch 'adafruit:main' into main
2022-06-09 08:42:42 +02:00
9c20eb58e9
Merge pull request #6450 from mwisslead/rp2040_pulsein_common_hal_construct
...
Rp2040 pulsein improvements
2022-06-08 08:15:29 -07:00
5c13f844c7
Fixed pre-commit trailing whitespace
2022-06-08 16:43:49 +02:00
91000ea294
Adds support for Challenger RP2040 LoRa boards
2022-06-08 16:38:21 +02:00
0a38088075
Fix dependencies for translate.c again
2022-06-07 07:35:54 +02:00
2baf476530
Merge pull request #6463 from adafruit/7.3.x
...
Catch main up to 7.3.x
2022-06-06 11:58:05 -07:00
6b09f99eaa
Add back ULAB
2022-06-06 10:35:37 -07:00
2f0d82a50b
Disable board.SPI() for Challenger NB RP2040 WiFi
...
This was done as a result of an issue with the SPI pin mappings.
Please refer to the following for additional information: https://ilabs.se/challenger-rp2040-wifi-spi-bug
2022-06-06 09:52:23 +02:00
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
ac282b2a73
Merge pull request #6440 from tannewt/translate_header
...
Switch translate() to the header file
2022-06-05 23:50:47 -04:00
a61c4c1af9
Merge pull request #6411 from fabaff/weact-studio-pico
...
Add support for WeAct Studio Pico
2022-06-05 19:17:56 -04:00
7a073317f7
Update PID (0x102E)
2022-06-06 01:03:02 +02:00
c149bbdcfc
Merge pull request #6447 from SimonVail/main
...
Add files via upload
2022-06-05 17:11:44 -04:00
db6d506b15
Merge pull request #6456 from dhalbert/adafruit_feather_esp32s3_4mbflash_2mbpsram
...
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-05 12:31:20 -04:00
67de89861e
new argument for feather s3 tft display init
2022-06-04 11:36:45 -05:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
be6936c8ec
Shrink MatrixPortal M4 build
2022-06-03 18:57:01 -07:00
d1cdb72020
Update ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-06-03 18:21:20 -04:00
be67067809
Merge remote-tracking branch 'adafruit/main' into translate_header
2022-06-03 15:18:18 -07:00
78e4b9446b
chore(swan_r5): pre-commit formatting
2022-06-03 15:12:41 -07:00
a4a744bccc
Merge pull request #6441 from gamblor21/static_ip
...
Static IP address for WiFi
2022-06-03 14:56:08 -07:00
113b070e77
fix(swan_r5): 3v3 was enabled but then immediately reset. Moved initialization to `reset_board` which happens after `reset_all_pins`.
2022-06-03 14:19:47 -07:00
fdb133bbe8
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-02 21:09:37 -04:00
0d257fc4f8
Fix mpy-cross and unix builds
2022-06-02 12:30:19 -07:00
27fb96e6b0
Remove trailing whitespace
2022-06-01 21:35:01 -04:00
3ff7ed75c6
Merge pull request #6346 from Neradoc/cpx-frozen-lite
...
Move frozen adafruit_circuitplayground to CPX subdirectory
2022-06-01 21:15:46 -04:00
40e890323b
Add DNS optional to set IP
2022-06-01 20:13:51 -05:00
14ab3c7375
ESP32 USE uart_param_config
...
Use this function instead of several individual configuration functions
to configure such things as Baud rate, transfer size, stop bits,
parity...
This function also resets both the RX and TX Hardware Fifo
reset functions are called to setup the hardware.
2022-06-01 17:09:44 -07:00
09c61efcff
Split partition from LTO enable
2022-06-01 11:12:14 -07:00
6d3698848c
Fix PDMIn.c formatting
2022-06-01 11:04:33 -07:00
4f6d4e2284
Doc fix and add set for DNS
2022-05-31 22:13:18 -05:00
7fc0aa5791
Fix windows and two samd builds
2022-05-31 14:48:41 -07:00
4d776339ad
Separate translate object control from LTO
2022-05-31 12:42:59 -07:00
b2344bcde2
Update pins.c
2022-05-30 11:52:29 -04:00
f36dbb386b
Add files via upload
2022-05-30 11:47:51 -04:00
e8dd5d35d6
# WARNING: head commit changed in the meantime
...
Fixed STM SPI frequency settings.
Corrected default frequency settings in common_hal_busio_spi_construct.
Fixed common_hal_busio_spi_get_frequency.
2022-05-29 16:13:38 +02:00
ffc451b338
argument for backlight_pwm_frequency and use it in pyportal titano build
2022-05-28 12:01:05 -05:00
3cc46c74b9
Fix compiles
2022-05-27 15:39:55 -07:00
90fe20a153
Adding manual IP address set
2022-05-27 15:33:54 -05:00
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
c676253834
Switch translate() to the header file
...
This allows the compile stage to optimize most of the translate()
function away and saves a ton of space (~40k on ESP). *However*, it
requires us to wait for the qstr output before we compile the rest
of our .o files. (Only qstr.o used to wait.)
This isn't as good as the current setup with LTO though. Trinket M0
loses <1k with this setup.
So, we should probably conditionalize this along with LTO.
2022-05-27 10:33:53 -07:00
dc5565a5ce
Merge pull request #6436 from dhalbert/judicious-lto
...
LTO: Use -flto and -flto-partition only as needed
2022-05-27 10:31:06 -07:00
947f564672
tune LTO on nrf
2022-05-26 22:16:41 -04:00
67e9fb13bc
Merge pull request #6437 from blues/7.3.x
...
swan_r5 improvements
2022-05-26 15:20:22 -07:00
ca085150ee
disable traceback on samd21; re-enable onewireio on Metro m0
2022-05-26 15:33:04 -04:00
95fc7e4713
harmless change to force all ports to build
2022-05-26 11:52:58 -04:00
d74193c298
Use -flto and -flto-partition only as needed
2022-05-26 11:36:41 -04:00
8539d6518e
flip CTS and RTS pinmux to match RX and TX
2022-05-26 00:06:00 +00:00
99b23b96d9
fix comment typo and mention datasheet
2022-05-26 00:03:46 +00:00
fb3077ccc2
Implement UART hardware flow control on SAMD chips
2022-05-25 21:34:06 +00:00
321163da1a
feat(swan_r5): blink the LED on startup. set VUSB_SELECT and DISCHARGE to floating to avoid any potential issues with them being outputs.
2022-05-25 14:22:19 -07:00
65a5ad09ab
feat(swan_r5): define an `ext` attribute on the board, which contains attributes for the extended set of castellated pins
2022-05-25 14:21:03 -07:00
5bbaa3b732
feat(swan_r5): the upper 1MB of flash (bank 2) is made available for the filesystem
2022-05-25 14:19:35 -07:00
b607631ae1
feat(swan_r5): UF2 support, with UF2 family IDs assigned to stm32 chipsets.
2022-05-25 14:18:37 -07:00
38f91539dc
Merge pull request #6432 from CytronTechnologies/add-maker-zero-samd21
...
Add new board: Cytron Maker Zero SAMD21
2022-05-25 13:58:33 -04:00
1fb210bd40
Merge pull request #5491 from pypewpew/remove-gamepadshift
...
Remove gamepadshift module
2022-05-25 13:58:06 -04:00
aef5bc40fb
Deleted white spaces
2022-05-26 00:13:27 +08:00
b143314b22
Espressif: fix allocation of multiple Incremental Encoders
2022-05-24 22:37:24 -04:00
9ed71f0c09
Add Cytron Maker Zero SAMD21
2022-05-25 10:09:30 +08:00
0b99967839
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:58 +08:00
46f4fcc42f
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:17 +08:00
9385f793dc
Add Cytron Maker Zero SAMD21
2022-05-25 10:07:33 +08:00
6fa552e257
Delete board.c
2022-05-25 10:04:06 +08:00
5453b331f7
Delete mpconfigboard.h
2022-05-25 10:03:53 +08:00
8806f5b5d8
Delete mpconfigboard.mk
2022-05-25 10:03:45 +08:00
9649d80ea3
Delete pins.c
2022-05-25 10:03:34 +08:00
4e467b7f34
Add Cytron Maker Zero SAMD21
2022-05-25 09:46:20 +08:00
c0152e7dab
Remove gamepadshift module
...
Everything should be using the keypad module instead.
Note: there are several boards that still had gamepadshift enabled. I
did not contact their authors to make sure they already switched to
keypad in their code and documentation. We should probably wait with
merging this for their go ahead.
2022-05-25 00:48:55 +02:00
791064a934
Merge pull request #6427 from dhalbert/8.0.0-onewireio
...
Remove busio.OneWire and bitbangio.OneWire in favor of onewireio.OneWire
2022-05-24 15:32:33 -04:00
ecd30d2338
Merge pull request #6428 from dhalbert/8.0.0-restore-rainbowio
...
restore rainbowio to small builds
2022-05-24 15:32:08 -04:00
8665e85ea6
Merge pull request #6424 from ladyada/main
...
add esp32s3 tft
2022-05-24 15:31:48 -04:00
99d7d0d8bb
Disable ulab for ESP32-S3 TFT
2022-05-24 14:59:34 -04:00
0ea72d61e0
Merge pull request #6425 from KurtE/teensy_retain_fs
...
Teensy Builds retain Filesystem
2022-05-24 11:03:47 -07:00
335c93c044
restore rainbowio to small builds
2022-05-24 12:34:08 -04:00
74c92ffe9e
Remove busio.OneWire and bitbangio.OneWire
2022-05-24 12:26:33 -04:00
92fa02effa
Change 12- to 16-bit scaling to match other ports
...
Result is identical, implementation just resembles other ports instead of being all 1337 about it.
2022-05-24 08:49:05 -07:00
c3f58193ca
Correctly scale analog reading per issue #4794
2022-05-24 08:46:39 -07:00
e22de975b3
try just bitbangio remove
2022-05-24 11:46:03 -04:00
5ef1f2dd5a
Correctly scale analog reading per issue #4794
2022-05-24 08:45:14 -07:00
44b31b098e
Correctly scale analog reading per issue #4794
2022-05-24 08:44:09 -07:00
e9b9f0b13f
Correctly scale analog reading per issue #4794
2022-05-24 08:42:00 -07:00
eefba16644
Correctly scale analog reading per issue #4794
2022-05-24 08:40:51 -07:00
9439ce04bd
try to remove some space?
2022-05-24 11:28:55 -04:00
d47662c448
Teensy Builds retain Filesystem
...
Changed a few things in the link step that satisfies the teensy
loader apps, both the teensy.exe as well as the teensy_loader_cli
such that when you program the board again it should retain the
file sytem that is stored in the upper area of the Flash
2022-05-24 07:06:16 -07:00
bb4beb3fab
add esp32s3 tft
2022-05-23 23:57:35 -04:00
3179db4ef4
move frozen adafruit_circuitplayground to express subdirectory
2022-05-23 22:11:26 +02:00
64df933a83
Merge pull request #6422 from dahanzimin/main
...
Repair mixgo_ce frozen lib to frozen/
2022-05-23 15:00:42 -04:00
0f1973b037
Merge pull request #6418 from solderparty/stamp_round_board
...
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-23 19:42:56 +02:00
943ab120ad
Merge pull request #6414 from dhalbert/pico-sdk-1.3.1
...
update pico-sdk to 1.3.1
2022-05-23 07:31:05 -07:00
6454c5895b
Repair import and stock in under the frozen / directory
2022-05-23 11:19:11 +08:00
2b0518233b
rp2040 PulseIn improvements
2022-05-23 00:45:06 +00:00
893fc66d16
Use common_hal_rp2pio_statemachine_construct for PulseIn
2022-05-23 00:45:06 +00:00
d2d3b27822
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-22 15:52:25 +02:00
6f4f7e089e
Merge pull request #6383 from dahanzimin/main
...
Add MixGo CE board
2022-05-22 08:47:53 -04:00
e5a5ffb9b0
Update board.c
2022-05-22 11:37:39 +08:00
37e376631a
Fix format issues
2022-05-22 11:22:58 +08:00
b62799a798
Add mixgo_ ce_ Serial function, repair sdkconfig
2022-05-22 10:42:56 +08:00
9c643aa907
Merge branch '7.3.x' into merge-7.3.0-rc.1-to-main
2022-05-21 12:57:46 -04:00
338e14d9d4
shrink arduino_mkr1300
2022-05-21 10:21:59 -04:00
3e47d24fb9
Update submodule and create tag
2022-05-21 10:52:14 +08:00
e852b28bb2
update pico-sdk to 1.3.1
2022-05-20 17:52:35 -04:00
309dab4c75
merge 7.3.0-rc.1 changes to main
2022-05-20 15:37:56 -04:00
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
3c20b5f95f
use validator in mimx UART constructor
2022-05-20 00:04:49 -04:00
4356a12504
Update mpconfigboard.mk
2022-05-20 10:55:23 +08:00
73f2621cda
Repair No newline at end of file
2022-05-20 10:38:14 +08:00
525262cd9a
Merge branch 'main' into main
2022-05-20 10:04:02 +08:00
e3896be345
Modify mixgoce_ Lib is a submodule
2022-05-20 09:46:55 +08:00
f1f9ba2371
Add support for WeAct Studio Pico
2022-05-19 23:51:25 +02:00
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
8987bf18d0
Add Winbond flash substitute to boards
2022-05-16 22:39:25 +02:00
624a00ac45
shrink circuitplayground_express_displayio
2022-05-14 08:54:46 -04:00
9fb4582cc8
Merge pull request #6393 from todbot/main
...
fix SPI pin names qtpy esp32s3
2022-05-13 21:54:55 -04:00
936f5bf23e
Merge pull request #6338 from jepler/fix-display-invalid-sh1107
...
Fix display invalid sh1107
2022-05-13 20:33:43 -04:00
d2d08fc944
fix SPI pin names qtpy esp32s3
2022-05-13 16:48:13 -07:00
64ca3aa359
Merge pull request #6387 from SimonVail/main
...
Lilygo TTGO T-OI Plus ESP32C3
2022-05-13 18:31:50 -04:00
951eea7748
Merge pull request #6391 from tekktrik/doc/add-additional-builtins-docs
...
Add additional documentation for modules, builtin exceptions
2022-05-13 15:59:39 -04:00
28b14e05e3
shrink thunderpack_v12
2022-05-13 15:45:12 -04:00
1f0bdad083
Update ports/espressif/boards/lilygo_ttgo_t-oi-plus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-05-13 15:02:26 -04:00
395b550fe3
Merge pull request #6389 from tannewt/add_ble_user_reset
...
Add two stage reset for BLE
2022-05-13 14:28:43 -04:00
9028bf213d
Merge pull request #6331 from pypewpew/pewpew_lcd
...
Add new board pewpew_lcd
2022-05-13 12:33:08 -04:00
289fdc1241
Added link to library and guide for rp2pio
2022-05-13 11:15:26 -04:00
3e85cfe26b
Fix ESP and HCI build
2022-05-12 15:23:26 -07:00
ef4d298ca8
Update pins.c
2022-05-12 17:49:48 -04:00
0d92b0a155
Update board.c
2022-05-12 17:46:49 -04:00
b1935975a2
Update board.c
2022-05-12 17:27:48 -04:00
269d51d023
Add two stage reset for BLE
...
This lets the BLE stack run through the wait period after a VM run
when it may be waiting for more writes due to an auto-reload.
User BLE functionality will have their events stopped. Scanning and
advertising is also stopped.
2022-05-12 13:20:44 -07:00
c5db1280ee
Update mpconfigboard.mk
2022-05-12 13:21:58 -04:00
6bdd128fb3
Add files via upload
2022-05-12 13:18:39 -04:00
f69a293795
Create sdkconfig
2022-05-12 13:18:17 -04:00
a4f505dcab
Delete ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3 directory
2022-05-12 13:17:17 -04:00
0b586e9c94
Update board.c
2022-05-12 12:43:52 -04:00
6fe728a9d2
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/pins.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:59 -04:00
6908f5a97e
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/board.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:52 -04:00
b6e6ee7505
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/mpconfigboard.mk
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:44 -04:00
b9ea7458ab
Add files via upload
2022-05-12 11:41:53 -04:00
35d78c135a
Create sdkconfig
2022-05-12 11:41:29 -04:00
f86ebe71b6
Delete Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:40:16 -04:00
0d1740ad27
Create Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:39:39 -04:00
d4b02e22ae
Thank you. I have applied for PID in espressif
2022-05-12 09:38:13 +08:00
b9c28742be
Added newline at the end of the file.
2022-05-11 15:30:45 +08:00
466f2a3644
Updated copyright information.
2022-05-11 15:25:32 +08:00
142ed2a024
Added Maker Feather AIoT S3.
2022-05-11 15:18:31 +08:00
9743aea7aa
Merge pull request #6334 from BigTuna94/add-rp2.65-f
...
Add new Keyboard - RP2.65-F
2022-05-10 16:52:39 -07:00
e7735a3631
Add new board pewpew_lcd
2022-05-10 22:25:32 +02:00
d48f961d0a
Add MixGo CE board
2022-05-10 18:56:13 +08:00
aa625f5ce4
Merge pull request #6366 from dhalbert/espressif-i2c-delay-fix
...
apply i2c delay fix from adafruit/esp-idf
2022-05-08 21:41:46 -04:00
bb46898572
Merge pull request #6361 from mwisslead/rp2040_pulsein_buffer_fix
...
Fix buffer issue for rp2040 PulseIn
2022-05-08 12:37:17 -04:00
8b026a2c38
apply i2c delay fix from adafruit/esp-idf
2022-05-08 09:49:18 -04:00
5f4f66774c
Merge pull request #6360 from jepler/statemachine-improvements
...
Statemachine improvements
2022-05-07 09:35:57 -05:00
561ed3739a
fix the docstrings
2022-05-07 07:49:16 -05:00
34427bd6ba
Update StateMachine.c
2022-05-06 22:36:24 -04:00
b7882edd01
Fix buffer issue for rp2040 PulseIn
2022-05-07 00:57:10 +00:00
b482a732c6
StateMachine: add swap flag
...
Always use DMA if swap flag is enabled.
Improve docs a bit
2022-05-06 15:22:43 -05:00
23c0fc8354
add ability to get, clear txstall flag
...
This can be used to make sure a PIO has actually finished all data
it was schedule to receive via a 'once' background_write
2022-05-06 15:22:43 -05:00
f776749ca3
Key off len, not buf, to decide if anything to DMA
2022-05-06 15:22:43 -05:00
1a9034ff7c
rp2pio: Allow background_write(None) to terminate after complete loop
2022-05-06 15:22:42 -05:00
5edc59f070
Merge pull request #6337 from jepler/property-storage
...
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
30904a8638
Merge pull request #6354 from dhalbert/espressif-dio-fixes
...
espressif: check properly for pull values
2022-05-05 22:44:29 -04:00
02ec1cebf6
Fix pin mapping for thing plus 2040
...
GPIO 26 was mapped to GPIO 28
2022-05-05 21:11:32 -04:00
a9d929627a
minor comment update
2022-05-05 14:40:49 -05:00
0f3eb9f46e
espressif: check properly for pull values
2022-05-04 22:51:27 -04:00
03b1a0284e
Merge pull request #6352 from billvanleeuwen424/removeDuplicateInclude
...
Removed duplicate include, fixes issue #6278
2022-05-04 21:47:17 -04:00
27cbf1321c
Merge pull request #6350 from dhalbert/samd-SRC_C-conditionals
...
Compile more SAMD things conditionally
2022-05-04 21:46:26 -04:00
76040a9380
removed duplicate include per issue 6278
2022-05-04 14:57:37 -04:00
b71ea29a8b
Merge pull request #6330 from KurtE/rp2040_uart_rs485
...
[RP2040] Allow any GPIO pin for RS485 direction pin
2022-05-04 13:32:36 -04:00
a7ec8b02e9
Merge pull request #6328 from KurtE/mixrt_uart_rs485
...
[mimxrt (teensy) Allow Any GPIO pin for RS485 pin
2022-05-04 13:30:09 -04:00
98ae047525
Compile more SAMD things conditionallly
2022-05-04 11:41:48 -04:00
e25e177a6f
Merge pull request #6343 from dhalbert/missing-board-LED
...
add board.LED to Metro M4 AirLift LIte and PyRuler
2022-05-03 19:17:04 -04:00
6378343bb3
As I mentioned in issue #6332 ,
...
there return of a read operation that times out with no data received
is inconsistent:
```
Adafruit CircuitPython 7.3.0-beta.1-31-g73f6b4867-dirty on 2022-04-30; Adafruit Feather RP2040 with rp2040
>>>
>>> import board, busio
>>> print(board.UART().read(5))
None
Adafruit CircuitPython 6.3.0 on 2021-06-01; FeatherS2 with ESP32S2
>>> import board,busio
>>> print(board.UART().read(5))
None
Adafruit CircuitPython 7.3.0-beta.1 on 2022-04-07; Adafruit Feather STM32F405 Express with STM32F405RG
>>> import board, busio
>>> print(board.UART().read(5))
None
Adafruit CircuitPython 7.3.0-beta.1-31-g73f6b4867-dirty on 2022-04-28; Teensy 4.1 with IMXRT1062DVJ6A
>>> import board, busio
>>> print(board.UART().read(5))
b''
```
Since I have a PR on this file anyway, I thought I would put in the change to make it consistent
with the other 3 board types I tried. Can not say about any of the others.
2022-05-03 13:39:49 -07:00
b181caaefc
add board.LED to Metro M4 AirLift LIte and PyRuler
2022-05-03 16:08:01 -04:00
7d7986b041
Add NEOPIXEL pin
...
Closes : #6307
2022-05-03 12:21:15 -05:00
510890b207
Enable squeezing property storage in flash
...
.. and enable it on atmel-samd and raspberrypi. On trinket_m0 this saves
96 net bytes of flash. There are 216 bytes actually saved by reducing
the flash storage size of the property descriptors, but added code in
several paths takes back over half of the 'raw savings'.
By organizing the "get-only" and "get-set" (but no delete) properties
each in a different section, we can represent then more efficiently.
Testing performed: that a get-only property can still be gotten but
can't be set or deleted; that a get-set property can sill be gotten or
set but can't be deleted. Tested on pygamer.
Because this requires linker file support, I only enabled it on two of
the ports.
2022-05-03 08:48:53 -05:00
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
a23ede8bc4
update USB VID/PID codes to match pidcodes request
2022-05-02 19:49:30 -04:00
7e622c3ff7
mpconfigboard.h also needs neopixel tweak
2022-05-02 13:23:55 -07:00
5d4e964de0
fix qtpy_esp32s3_nopsram neopixel pins
2022-05-02 13:04:05 -07:00
1fad381513
[RP2040] Allow any GPIO pin for RS485 direction pin
...
As I mentioned in issue #6310 while investigating that the Teensy port
did not support RS485_dir pin on normal GPIO pins, I found that it
was not implemented either as well on some other ports.
So was curious to implement it for RP2040 using same approach as I did
for the MIMXRT in the Pull Request #6328
That is I setup the specified pin as a normal GPIO pin in output mode
and then when you do a write operation it sets the GPIO pin logically
high, and when the write completes I set it logically low.
Note: knowing when I can set it low can be tricky, as you need to make
sure the full output has completed otherwise the data will be corrupted.
I am using: uart_tx_wait_blocking(self->uart);
Which looks like it is supposed to wait until the busy status is no
longer set, which the Reference manual mentioned, but this is leaving
the line logically set longer than I would like.
however I have tried running it with my hacked up version of the
Python Robotis DynamixelSDK and was able to talk to some AX servos.
I did have to change the library slightly for the RP2040, as the
library was erroring out when you did something like uart.read(5)
and it timed out without receiving anything. The RP2040 returned
None whereas I think the Teensy returned an empty set, which is what
it looks like the PySerial original code expects.
Not sure if anyone is interested in this, but thought i would
put it out as PR and see.
2022-04-30 14:31:08 -07:00
816a26e8b7
Merge pull request #6321 from dhalbert/samd21-ticks-for-display
...
Preserve ticks for displays across VMs
2022-04-28 09:37:21 -04:00
e63a327107
Bound PulseIn start indexes to maxlen.
2022-04-28 02:28:34 +00:00
b25d810af9
Preserve ticks for displays across VMs
2022-04-27 20:06:47 -04:00
73f6b48676
[mimxrt (teensy) Allow Any GPIO pin for RS485 pin
...
The existing code was setup that allowed you to specify an RTS
pin to be used as an RS485 direction pin, however there are no
RTS pins that are exposed on any of the Teensy 4.x boards.
Instead Arduino code base allowed you to specify any GPIO pin to
work instead. So I added the code in to facilitate this.
In addition the alternative code to wrap your own GPIO pin set high and low
around call(s) to uart.write() will not currently work, unless maybe you
fudge it and add your own delays as the write will return after the last
byte was pushed onto the UART’s hardware FIFO queue and as such if you
then immediately set the IO pin low, it will corrupt your output stream.
The code I added detects that you are setup to use the RS485 pin and
before it returns will wait for the UART’s Transfer complete status flag
to be set.
2022-04-27 11:26:08 -07:00
b7541088f4
shrink circuitplayground_express_crickit
2022-04-26 17:51:47 -04:00
7a77aae4be
shrink feather_m0_supersized
2022-04-26 16:52:43 -04:00
6b25ccf1a4
remove stray space
2022-04-26 14:26:42 -04:00
63abd9a9cf
Merge pull request #6312 from dhalbert/adjust-neopixel-timings
...
test and adjust NeoPixel timings on multiple ports
2022-04-26 13:18:47 -04:00
3a8fb4e956
Merge pull request #5852 from jepler/floppy
...
Add floppyio
2022-04-26 11:40:19 -04:00
c8e8171cec
Merge pull request #6300 from jepler/pio-continuous
...
rp2040: add a background write with looping to StateMachines
2022-04-26 10:09:02 -04:00
910662e833
Finalised motor 2040 pins
2022-04-26 12:56:31 +01:00
1ccf767112
Merge branch 'adafruit:main' into motor
2022-04-26 10:23:14 +01:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
0642917cf7
Merge pull request #6270 from FoamyGuy/tilegrid_bitmap_property
...
adding bitmap property to TileGrid
2022-04-25 09:09:28 -04:00
fdf8207e05
Merge pull request #6281 from ViktorWiz/w5100s-evb-pico
...
Added WIZnet board W5100s-evb-pico
2022-04-25 09:09:08 -04:00
5b7e0754dd
Merge pull request #6287 from KurtE/mimxrt_pwm
...
Fix PWM Support for the MIMXRT boards
2022-04-25 09:02:40 -04:00
1a89a2d366
fix doc build
2022-04-23 13:25:59 -05:00
989fb828d4
Revamp background writing
...
Now a 'once' and a 'loop' buffer can be specified.
'once' is useful for things like writing a neopixel strip in the background,
if you can guarantee the buffer contents are stable until the write is complete.
'loop' is useful for periodic things, like pwm & servos.
both together are useful for some special cases of pwm/servo, where a
transitional waveform needs to be played for one repetition and then
a new waveform needs to be played after that.
The API is renamed to reflect that it's a more generic 'background'
operation.
2022-04-23 13:09:36 -05:00
8d9dc1fb93
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 11:47:40 -07:00
3c343cf1b8
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 11:47:30 -07:00
3885bc9018
Merge pull request #6303 from DavePutz/issue_4452
...
Fix for issue #4452 - time.sleep on STM
2022-04-22 13:34:31 -04:00
1312e5c759
Update ports/mimxrt10xx/supervisor/port.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:16:27 -07:00
f102c15bb4
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:40 -07:00
79dd2a6cd5
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Fix Comment spelling
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:29 -07:00
53b7caf13c
Update ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-04-22 09:15:01 -07:00
e8541e866c
fix end of file issue
2022-04-22 15:02:50 +09:00
28296f98f8
update pid
2022-04-22 14:59:28 +09:00
f91be019f6
Merge branch 'adafruit:main' into w5100s-evb-pico
2022-04-22 14:52:04 +09:00
289aaae954
Fix for issue #4452 - time.sleep on STM
2022-04-21 17:05:44 -05:00
76d54ca8ad
shrink sparkfun_redboard_turbo
2022-04-21 12:58:46 -04:00
457aba79f4
fix doc build
2022-04-20 08:09:38 -05:00
4aea8049c5
Merge pull request #6279 from mjs513/main
...
Added Settable Clock for MIMXRT BOARDS
2022-04-20 08:31:41 -04:00
1fcc73bc24
Merge pull request #6261 from KurtE/PortSerialHooksIssue
...
disable on mimxrt10xx (Teensy40 41) Serial port Hooks
2022-04-19 23:04:07 -04:00
144eb5dfd4
fix lost DMA IRQ
2022-04-19 16:42:27 -05:00
ebc426d9e6
Remove debug prints, improve docs
2022-04-19 16:39:04 -05:00
b128f180ca
switch to single single dma channel, fix some bugs
2022-04-19 16:33:51 -05:00
49769cfea4
Convert to use debug rx/tx pins to trigger adding this code
...
As per review request
2022-04-19 14:02:16 -07:00
33d6d55675
the basics work
...
the sequence has to be a minimum length, 8 entries, but this problem
is not detected. I don't THINK this is an insurmountable problem.
2022-04-19 15:14:50 -05:00
33f5598acc
Stub 'continuous write' functionality
2022-04-19 11:35:43 -05:00
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
6425e937b5
Merge pull request #6289 from stonehippo/samd51_mm_flash
...
Samd51 mm flash
2022-04-18 18:59:58 -04:00
eab4867e61
Remove dead replaced code
...
As requested, I removed the dead code that was replaced
2022-04-18 15:46:36 -07:00
3b5171c4ff
Move hook implementation to supervisor
2022-04-18 14:09:36 +00:00
4ab3881a82
Merge pull request #6282 from xuhow/elecfreaks_picoed
...
Elecfreaks picoed
2022-04-18 10:07:17 -04:00
32fc084b39
Removed compiler flag in favor of MP_WEAK implementation
2022-04-18 13:10:12 +00:00
0ba93b20e5
Setup flash pins on Sparkfun SAMD51 Micromod
2022-04-18 13:10:12 +00:00
208bfb33aa
Deleted Warnings Chanaged ValueError Method
2022-04-17 15:04:16 -04:00
Jeff Epler
Scott Shawcroft
Melissa LeBlanc-Williams
Xu Hao
Nathan Young
Tod Kurt
Dan Halbert
Dan Halbert
Nick Lopez
Patrick
Patrick Van Oosterwijck
Neradoc
root
Matthew McGowan
Omer Kilic
Pontus Oldberg
Fabian Affolter
foamyguy
gamblor21
KurtE
SimonVail
EmergReanimator
George White
Luqmanul Hakim Zulkifli
Radomir Dopieralski
Paint Your Dragon
lady ada
arturo182
dahanzimin
Michael Wisslead
大汉子民
Kattni
Alec Delaney
Kong Wai Weng
Guy Dupont
billvanleeuwen424
Zach Richard
ZodiusInfuser
ViktorWiz
mjs513