This simplifies allocating outside of the VM because the VM doesn't
take up all remaining memory by default.
On ESP we delegate to the IDF for allocations. For all other ports,
we use TLSF to manage an outer "port" heap. The IDF uses TLSF
internally and we use their fork for the other ports.
This also removes the dynamic C stack sizing. It wasn't often used
and is not possible with a fixed outer heap.
Fixes#8512. Fixes#7334.
micropython puts the pointer-ness into the typedef; we can put the
const-ness there too.
this reduces the delta to micropython; for instance, emitinlinextensa
and emitinlinethumb now match upstream.
These are moved:
* Display -> busdisplay.BusDisplay
* FourWire -> fourwire.FourWire
* EPaperDisplay -> epaperdisplay.EPaperDisplay
* I2CDisplay -> i2cdisplaybus.I2CDisplayBus
`paralleldisplay` is now `paralleldisplaybus` (and registered as
`paralleldisplay` too).
Bus related helpers are split out of display_core into bus_core.
It is in still displayio since it is a dependency of both
busdisplay and epaperdisplay.
Fixes#7667
.. so they need a correct row count, which could be the "core.width"
of a 90/180 rotated display.
While I discovered this on the very unusual 320x960 display it could have
affected any framebuffer display that was taller than it was wide,
including sharp memory displays and rgbmatrix displays.
* can now send the I2C bus initialization code
* can now reset the display on an I/O expander pin
* parameters re-ordered to enable easy use with **board.TFT_IO_EXPANDER
with the i2c bus operating at 400kHz this achieves a 4.8kHz SPI clock
rate which could be worse.
It accepts the same style of init sequence as displayio.
tested by scoping the pins on the espressif lcd dev kit with a dummy init sequence:
```python
dotclockframebuffer.ioexpander_send_init_sequence(
bus=bus,
i2c_address=expander_addr,
gpio_address=1,
gpio_data_len=1,
gpio_data=0xff,
cs_bit=1,
mosi_bit=3,
clk_bit=2,
init_sequence=init_sequence)
```
