Commit Graph

25 Commits

Author SHA1 Message Date
Scott Shawcroft b16037859c
Fix native epd boards 2023-04-21 14:36:35 -07:00
Scott Shawcroft d5b747b305
Fix board inits 2023-04-21 13:23:01 -07:00
Scott Shawcroft 931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
  This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
  runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
  that safe mode messages show up on the display.

ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
  watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
  display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
  need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.

For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
  converted colors at each index.
* ColorConverter now caches the last converted color. It should make
  conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
MicroDev cda5689263
move `esp32_camera` to `espcamera` 2023-01-27 22:05:43 +05:30
microDev 4f753251db
cleanup `mpconfigboard.mk` of espressif boards
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
2022-10-06 16:15:01 +05:30
Dan Halbert 4cb69a51d5 Use MP_WEAK for default board.c routines 2022-09-08 07:36:50 -04:00
Scott Shawcroft df1435ae94
Audit all boards with LED pins defined
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)

Fixes #6717
2022-08-11 14:41:20 -07:00
Jeff Epler 0e26a937cc
Disable camera everywhere it doesn't fit 2022-08-04 15:12:08 -05:00
Chris Dailey 2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag. 2022-07-27 08:38:52 -04:00
Dan Halbert 76e32dcf93 remove need for CIRCUITPY_ESP_PSRAM 2022-07-08 14:54:55 -04:00
Dan Halbert 780c4963cb wip; change never-ever reset pin mechanism 2022-06-28 23:06:49 -04:00
Dan Halbert 02069eb0b5 wip 2022-06-23 15:59:06 -04:00
root b993313ac1 Don't reset GPIO4 (used for voltage monitoring) 2022-04-05 11:30:12 -05:00
Scott Shawcroft 4363361c87
Board definition clean up
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
  somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
  them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
  with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
Dan Halbert 1c3e03d1b1
Merge pull request #6057 from tannewt/board_pin_reset
Allow ESP boards to customize how a pin is reset
2022-02-17 21:12:11 -05:00
Scott Shawcroft c4fb5f7df1
Allow ESP boards to customize how a pin is reset
This allows board code to override the default pull up reset state.

It is useful for pins that are already externally connected, pulled
or otherwise used by the board.

Fixes #5931
2022-02-17 16:32:29 -08:00
Melissa LeBlanc-Williams 726bf02ea8 Add PortalBase and Fake Requests and update Frozen Libs on Portal boards 2022-02-16 10:12:54 -08:00
Scott Gauche 309f4fb2b9 add half_duplex false param to spi construct function call in some board files 2022-02-08 22:59:26 -05:00
Neradoc b2c8fd3938 add board.STEMMA_I2C alias to some boards 2022-02-02 01:18:46 +01:00
Dan Kulinski 19f9163892 Bringing branch up to date with current main 2022-01-25 11:02:00 -07:00
Dan Kulinski 60801066b2 Fix magtag, openbook for EPaperDisplay constructor 2022-01-24 12:34:01 -07:00
Scott Shawcroft d99847b410
Refactor pin reset on ESP
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.

Fixes #5893
2022-01-20 12:40:41 -08:00
Scott Shawcroft 39639ecd17
Rework configs to take target into account
New script will filter settings to different tiers.
2022-01-13 15:55:37 -08:00
microDev 7dda3ec91c
switch to `IDF_TARGET` for soc dependent stuff
Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com>
2021-09-18 19:49:32 +05:30
Scott Shawcroft 973a90f2aa
Rename esp32s2 port to espressif
This is in preparation for ESP32-S3 support and potentially others.

Related to #4363
2021-09-13 16:44:55 -07:00