81833035fc
raytac_mdbt50q-rx
2021-08-04 15:47:19 -04:00
fc59a7ac02
Merge pull request #5068 from dhalbert/remove-gamepad
...
remove gamepad; deprecate gamepadshift
2021-07-27 11:35:06 -04:00
b0fb709d83
more gamepad removal
2021-07-26 23:34:25 -04:00
901a6c27c0
remove gamepad; deprecate gamepadshift
2021-07-26 22:15:09 -04:00
11ca505fdb
add board.LED wherever possible
2021-07-26 19:57:12 -04:00
70cbb4eddb
Support multiple status neopixels
...
Use the 10 neopixels on the playgrounds for status.
Fixes #5039
2021-07-23 15:17:09 -07:00
0fadf028ef
Create first BLE-only board, Micro:Bit v2
...
This fixes build issues with USB off, tweaks the README to allow
for BLE-only boards and adds the Micro:Bit v2 definition.
Fixes #4546
2021-07-14 09:55:51 -07:00
3940878695
Shrink builds and handle 0-length writes
2021-07-01 12:49:11 -07:00
04b69cde9b
turn off gamepad on most builds;turn off keypad where appropriate
2021-06-17 13:46:45 -04:00
4655a71793
Turn off keypad on some builds to avoid overflow
2021-06-15 14:11:04 -04:00
5c33c9d597
Fix SAMD
...
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
579cdf30f1
fix more build errors
2021-05-05 16:49:29 -04:00
d4d96bb25f
Merge pull request #4236 from jun2sak/nrf52-sleep
...
sleep and wakeup for nrf52
2021-04-28 12:11:31 -04:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
4e1d2fa056
Adding clearer on-board DotStar pin names.
2021-04-27 12:52:24 -04:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
7accb8b173
modify copyright notice.
2021-04-25 19:57:21 +09:00
346740e152
Merge pull request #4609 from Neradoc/add_nrf_countio
...
NRF: implement countio
2021-04-23 08:37:00 -04:00
f0b04d403d
Add board definition files for ARAMCON2 Badge
2021-04-19 20:41:01 +03:00
223027fe9e
shrink simmel
2021-04-15 01:43:02 +02:00
da4dceea15
Fix 16MB Winbond names
2021-03-25 11:37:08 -07:00
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840
...
Add new nRF port for SF MicroMod nRF52840.
2021-03-10 18:13:11 -08:00
d5365cb066
SDIO/QSPI pin names. ¯\_(ツ)_/¯
2021-03-09 18:36:29 -05:00
5beb529f61
Update pins, remove unused defs from board config.
2021-03-09 17:43:13 -05:00
fe0655e121
Update pins, remove unused defs from board config.
2021-03-09 17:39:50 -05:00
1ae858126a
Fix the mpconfigboard.mk that was screwy?
2021-03-09 17:29:10 -05:00
a61db7f12e
Updated SparkFun MicroMod USB PID
...
As per the PID provide by TheHoff, [here](https://forum.sparkfun.com/viewtopic.php?p=223812#p223812 )
2021-03-09 12:54:52 -05:00
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
3b76299f39
Add new nRF port for SF MicroMod nRF52840.
2021-03-07 01:06:50 -05:00
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
cf3217e6d4
Merge pull request #4232 from TG-Techie/fix_tg_watch
...
fix TG-Watch ble issue
2021-02-20 18:10:52 -05:00
a9a2145238
fix TG-Watch ble issue
2021-02-20 15:46:33 -05:00
985e020936
shrink simmel build
2021-02-19 18:41:27 -05:00
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
745ba01768
shrink simmel
2021-02-01 12:22:35 -05:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
f154ee855d
shrink simmel
2021-01-26 10:23:37 -05:00
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
c4f0325ff8
Merge pull request #3991 from TG-Techie/main
...
Revision to TG-Watch
2021-01-14 18:43:52 -05:00
c63d5a44a0
restore TG-Watch USB_PID from accidental overwrite
2021-01-14 00:08:34 -05:00
5f8ad0c5e6
correct USB_PRODUCT for TG-Watch
2021-01-14 00:02:56 -05:00
8f8af90098
final name and extra board
2021-01-13 23:51:34 -05:00
8652d69614
update TG-Watch pins, name, and frozen libraries
2021-01-10 04:04:50 -05:00
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
fb0c74c5f1
Merge pull request #3662 from ElectronicCats/bastble
...
Add new board BastBLE
2020-12-21 17:39:08 -08:00
d24a5d6270
update path board.h
2020-12-20 15:52:19 -06:00
bd3c5c33fb
define QSPI pinout
2020-12-20 14:57:10 -06:00
88b1e2fe61
remove Internal flash unnecessary
2020-12-20 13:35:15 -06:00
8f9cd7075e
Merge pull request #3752 from jepler/gcc10
...
build: Update to gcc10
2020-12-17 11:03:40 -05:00
bbbd621b18
nrf: simmel: remove some unneeded modules to make it fit
2020-12-15 10:54:37 -06:00
344d3c59cb
Merge branch 'main' into msgpack
2020-12-11 11:10:30 -08:00
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
34bbcc4910
exclude nrf/simmel due to lack of flash
2020-12-02 13:05:00 -08:00
fe1c2fa6f0
Removed bus device from simmel build
2020-12-01 19:11:17 -06:00
33ca357094
fix VID and PID
2020-11-16 22:10:37 -06:00
089fa82067
Fix pre-commit
2020-11-16 21:21:24 -06:00
6a6e998ea5
Added BastBLE
2020-11-07 19:21:36 -06:00
92cd599ea3
Modify the pins of the hiibot_bluefi.
2020-11-05 09:14:53 +08:00
09ae9aefa8
Merge pull request #3610 from Edrig/main
...
Add new board to nrf port: holyiot_nrf52840
2020-10-30 12:03:34 -07:00
5ab2f16f64
Change Board Name to ADM_B_NRF52840_1
...
edit : .github/workflows/build.yml
rename : ports/nrf/boards/holyiot_nrf52840/board.c -> ports/nrf/boards/ADM_B_NRF52840_1/board.c
rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h
rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk
rename : ports/nrf/boards/holyiot_nrf52840/pins.c -> ports/nrf/boards/ADM_B_NRF52840_1/pins.c
2020-10-28 22:08:10 +01:00
b44011d196
fix railing Whitespace pin.c
2020-10-28 01:43:42 +01:00
b5c95e3b1a
Merge branch 'main' of https://github.com/Edrig/circuitpython into main
...
modifié : boards/holyiot_nrf52840/pins.c
2020-10-28 00:40:46 +01:00
9b911b2211
modifié : pins.c
2020-10-28 00:38:07 +01:00
27827a4fef
Fix EOF error
...
modifié : mpconfigboard.mk
modifié : pins.c
2020-10-28 00:34:07 +01:00
d0426b3438
Update pins.c
...
fix mistake
2020-10-27 23:54:46 +01:00
5deb045a81
Ready to PR
...
* ../../.github/workflows/build.yml
+ boards/holyiot_nrf52840/board.c
+ boards/holyiot_nrf52840/mpconfigboard.h
+ boards/holyiot_nrf52840/mpconfigboard.mk
+ boards/holyiot_nrf52840/pins.c
2020-10-26 23:32:57 +01:00
ff69ab603d
fix CPB SPI pin definitions
2020-10-21 17:07:30 -04:00
94beeabc51
remove unnecessary board configuration and address feedback
2020-10-11 22:42:59 -07:00
f5f1e29dc0
disable async/await on a several small ucontrollers
2020-10-10 15:43:12 -07:00
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
8d6a28a9ff
Update user button names.
2020-09-18 17:01:44 -04:00
5249a228a0
More pin names cleanup.
2020-09-18 14:27:00 -04:00
db078922e4
Removed TXD/RXD, fixed whitespace.
2020-09-17 21:32:19 -04:00
be3e478fce
Add SDA & SDL, RX & TX to pins.c
...
Despite the [silk on the dock board](https://wiki.makerdiary.com/nrf52840-m2-devkit/resources/nrf52840_m2_devkit_hw_diagram_v1_0.pdf ), the SDA/SCL pins weren't defined. Though, they were already defined in `mpconfigboard.h`.
Same for RX/TX. It looks like it declared `TXD` and `RXD`, so I didn't want to remove those, but I think it makes sense to have the "standard" pin names, but I moved ithem to illustrate they were all referencing the same pins.
I mimicked the whitespace I saw in the metro_nrf52840_express port.
2020-09-17 20:46:59 -04:00
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
...
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
95e27bb8bf
Add more PIDs for unique boards
2020-09-15 13:43:35 -07:00
8e77981ad5
Merge pull request #3297 from simmel-project/i2c
...
Update Simmel board definition to reflect DVT hardware
2020-08-18 12:55:45 -07:00
771388cde2
Remove trailing space.
2020-08-18 11:44:31 -07:00
211c134950
add I2C, remove unused pins
2020-08-18 19:02:23 +08:00
a4508f846d
stash config
2020-08-18 18:16:49 +08:00
94ecf33a5c
Merge pull request #3281 from dhalbert/fix-spim3-buffer-location
...
SPIM3 buffer must be in first 64kB of RAM
2020-08-17 19:28:03 -04:00
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
af1291ec28
dynamically enable or disable QSPI by default
2020-08-07 16:23:42 +08:00
7854625c4e
avoid using the RGB LEDs to save energy
2020-08-05 16:08:13 +08:00
6dc0f4f1b6
add an option to turn off QSPI when sleep
2020-08-05 01:10:58 +08:00
debbf1028a
Merge pull request #3196 from IkigaiSense/ikigaisense_vita
...
add-ikigaisense_vita-nRF52840
2020-07-27 16:10:57 -07:00
204cdada7c
remove unnecessary mk files parameters
2020-07-24 09:53:40 -05:00
c937fa1760
fix formatting
2020-07-23 19:29:57 -05:00
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
1ee8a09da2
add-ikigaisense_vita-nRF52840
2020-07-23 14:39:59 -06:00
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
610e0171aa
Disable existing native networking.
...
We're moving towards a co-processor model and a Wiznet library is
already available.
New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
2020-07-17 17:43:02 -07:00
7bb508bf43
Merge pull request #3157 from tinkeringtech/tinkeringtech-scoutmakes-azul
...
Addition of Tinkeringtech ScoutMakes Azul nRF52840 based platform to CircuitPython
2020-07-16 11:03:31 -07:00
49fcfd14d2
Added the TinkeringTech ScoutMakes Azul platform to CircuitPython
2020-07-15 21:49:34 -04:00
d712d1281c
Merge branch 'main' into master
2020-07-13 15:53:44 -07:00
c8752ff93e
use RGB LEDs as status indicators
2020-07-11 21:25:32 +08:00
8e26fdc0e9
add LED status, remove unused macros
2020-07-11 10:51:31 +08:00
7ff499046b
use VID & PIDs granted by Seeed
2020-07-11 00:37:45 +08:00
0068c76fa6
Merge pull request #3135 from arms22/bless_dev_board_multi_sensor
...
Add new board BLE-SS dev board Multi Sensor
2020-07-09 10:29:57 -07:00
678f266394
fix pre-commit check
2020-07-09 10:25:46 +00:00
96f6ce222c
add makerdiary m60 keyboard
...
Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>
2020-07-09 10:02:27 +00:00
e81d22cd67
add makerdiary nrf52840 m.2 devkit
...
Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>
2020-07-09 10:01:04 +00:00
bb5cdcf954
Add new board BLE-SS dev board Multi Sensor
2020-07-09 11:26:45 +09:00
768149fb01
modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-08 10:36:41 -05:00
5a9aac472a
modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-07 14:37:59 -05:00
dc2f729d19
modified: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.mk
...
modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-07 14:37:08 -05:00
b5af05cd31
new file: ports/nrf/boards/raytac_mdbt50q-db-40/board.c
...
new file: ports/nrf/boards/raytac_mdbt50q-db-40/bootloader/6.0.0/pca10056_bootloader_6.0.0_s140.zip
new file: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.h
new file: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.mk
new file: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-07 12:27:23 -05:00
57fde2e07b
sdcardio: implement new library for SD card I/O
...
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
33496e9c68
Add nice!nano board support
2020-06-05 19:58:54 -05:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
9380c34cf7
Merge remote-tracking branch 'adafruit/master' into wdt-nrf
2020-05-27 10:47:08 -07:00
d06a7c4671
Correct HiiBot BlueFi USB_PID
...
Donated a PID set for HiiBot BlueFi.
2020-05-27 11:47:15 -04:00
d0f1b59be5
nrf: pca10100: disable some unused features to shrink image
...
This removes some features that are largely unused in order to get the
image to fit.
Recommended in
https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632859678
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
33001f4e19
nrf: simmel: shrink filesystem to fit watchdog timer
...
The watchdog timer has increased the amount of code and text that's
required.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
0169ea5155
nrf: discard arm exception sections
...
Since these exceptions are unused, don't include them in the output
binary.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
595f6387c2
watchdog: rename module from `wdt` and move to `microcontroller`
...
This also places it under the `microcontroller` object.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
fbe1c05832
nrf: simmel: enable wdt support
...
This enables WDT support for Simmel. Other platforms cannot yet use
WDT because it overflows their flash storage.
Enable CIRCUITPY_WDT support for the nrf target.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
17ef2df2ca
nrf: ld: add ARM.exidx to output image
...
With the WDT changes, building Circuit Python results in the following error:
/opt/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx LMA [00000000000621c8,00000000000621cf] overlaps section .data LMA [00000000000621c8,0000000000062383]
This is because unwinding data is getting generated, but has nowhere to go.
Re-enable this data in the linker script so it is saved.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
19f0d82048
Merge pull request #2955 from BradChan/master
...
Add hiibot_bluefi board definitions
2020-05-26 15:37:35 -04:00
f002c784c0
nrf: linker: add a new .uninitialized section
...
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.
The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
4f7b4241a2
add hiibot_bluefi
2020-05-18 09:42:37 +08:00
ffaeeda749
nrf: simmel: decrease flash filesystem size
...
The flash filesystem must be reduced in order to allow the current
build to fit.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
f7fcd43516
nrf: simmel: disable SPIM3
...
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
79c055f958
nrf: simmel: enable aesio
...
This adds AES support to simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
235098efb8
nrf: simmel: correct CSn pin
...
The CSn pin is pin 6 on bank 1, not bank 0.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go
...
add nRF52840 based Makerdiary Pitaya Go
2020-05-11 16:34:27 -07:00
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100
...
nrf: add pca10100
2020-05-04 10:51:01 -04:00
b128399d1e
nrf: simmel: enable CIRCUITPY_USB_HID
...
Simmel had USB HID disabled in order to save space. However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID. This in turn caused HID to be included
in the USB Configuration Descriptor.
For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython. However, in the most recent version this has rightfully
caused asserts to appear during configuration.
Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
cb4fc894d7
nrf: add pca10100
...
This is the nRF52833-DK board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:07:49 +08:00
7dd3ddc06b
use Nordic's VID which seems to be allowed
...
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
2020-05-01 06:10:43 +00:00
1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-30 13:25:31 -07:00
74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout
...
Update teknikio bluebird pin assignments
2020-04-30 11:50:02 -07:00
36a71560c2
update teknikio bluebird pin assignments
2020-04-30 09:58:27 -04:00
4393a88fb6
add nRF52840 based Makerdiary Pitaya Go
2020-04-30 07:38:20 +00:00
180f5c6a94
Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes
2020-04-29 22:11:22 -04:00
a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-29 10:51:21 -07:00
1d0781bf12
nrf: add simmel board
...
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
b9e494b85a
add submodule to TG-Watch02A
2020-04-28 00:03:02 -04:00
76b466a38a
add submodule to TG-Watch02A
2020-04-27 22:49:30 -04:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
Dan Halbert
Kattni
Scott Shawcroft
Jeff Epler
Artyom Skrobov
Dan Halbert
Scott Shawcroft
jun2sak
Benny Meisels
Neradoc
microDev
nitz
Jeff Epler
Kevin Matocha
Jonah Yolles-Murphy
gamblor21
foamyguy
iot49
sabas1080
Jeff Epler
Bernhard Boser
cyz
Gaetan
Noel Gaetan
Jerry Needell
Kenny
Mark Roberts
bunnie
Yihui Xiong
root
ikigaisense
TinkeringTech
arms22
Arudinne
Nick
Diego Elio Pettenò
Sean Cross
JoeBakalor
TG-Techie