Neradoc
ba72287db4
Implement default ports to IOTS2
2022-06-22 07:24:27 +02:00
root
e8023f33a9
Test for a BLE disconnect while reading
2022-06-21 19:59:23 -04:00
root
1ad3daf75b
Fix declaration of print_wakeup_cause
2022-06-21 19:56:15 -04:00
root
803c18c71f
Uncommented call to print_wakeup_cause
2022-06-21 19:56:15 -04:00
root
d3903bf2f4
Fix for Issue #6478
2022-06-21 19:56:15 -04:00
Scott Shawcroft
562c73bcc7
Merge pull request #6458 from blues/swan_r5_3v3_enable
...
fix(swan_r5): 3v3 was enabled but then immediately reset.
2022-06-21 13:56:58 -07:00
Matthew McGowan
019a160983
exposes DigitalInOutPin instances on the board, initialized and reserved.
2022-06-20 14:46:58 -07:00
Neradoc
7f968f18c0
move frozen adafruit_circuitplayground to express subdirectory
2022-06-20 16:55:10 -04:00
Scott Shawcroft
c27ecc9bb1
Merge pull request #6495 from DavePutz/issue_6451
...
Test for a BLE disconnect while reading
2022-06-17 09:37:07 -07:00
Dan Halbert
f0bf14094b
Update samd-peripherals to fix SPI DMA problem
2022-06-17 10:59:59 -04:00
Dan Halbert
f590c7cc9a
Merge pull request #6485 from electrolama/add-board-electrolama-minik
...
Add custom board: Electrolama minik (RP2040 module)
2022-06-17 09:01:04 -04:00
root
cdc7140318
Test for a BLE disconnect while reading
2022-06-16 14:56:18 -05:00
Scott Shawcroft
894cea217d
Merge pull request #6486 from DavePutz/issue_6478
...
Fix for Issue #6478
2022-06-15 09:43:09 -07:00
root
8668dee3df
Fix declaration of print_wakeup_cause
2022-06-14 20:51:07 -05:00
root
669e45497c
Uncommented call to print_wakeup_cause
2022-06-14 13:27:15 -05:00
Patrick Van Oosterwijck
ad56a16c2d
Add board Silicognition LLC RP2040-Shim
2022-06-14 11:28:41 -06:00
root
015e95807a
Fix for Issue #6478
2022-06-14 12:14:05 -05:00
Omer Kilic
9fbad229c0
Add custom board: Electrolama minik (RP2040)
2022-06-14 15:51:10 +01:00
Scott Shawcroft
0c418e98b1
Merge remote-tracking branch 'adafruit/main' into auto_wifi
2022-06-13 15:44:43 -07:00
Scott Shawcroft
dc794f91c0
Speed up auto-wifi with wrong password
...
This adds basic timeout support to connect by preventing subsequent
retries if over time. The first connect may still take more than
the timeout.
2022-06-13 15:38:19 -07:00
Scott Shawcroft
1a3d2a5b5e
Shrink nrf52833 builds
...
Make them CIRCUITPY_FULL_BUILD = 0 and rework the boards to have
the same modules enabled (ish.)
Also make ZLIB require FULL_BUILD and disable advanced `micropython`
module APIs by default on all builds.
2022-06-13 15:36:15 -07:00
Scott Shawcroft
b191075ab8
Better length checks
2022-06-13 09:18:42 -07:00
Scott Shawcroft
ab346a27fc
Merge pull request #6468 from blues/stm32_rtc
...
feat(swan_r5): adds a basic STM32 RTC implementation.
2022-06-13 09:00:09 -07:00
Scott Shawcroft
39b8c2c94e
Merge pull request #6453 from KurtE/ESP32_UART
...
ESP32 USE uart_param_config
2022-06-13 08:56:32 -07:00
Matthew McGowan
beafbc7c60
enable RTC for all STM32 devices
2022-06-10 17:37:33 -07:00
Matthew McGowan
6ee8e00936
fix(stm32): correct include path after translation header was moved
2022-06-10 17:37:33 -07:00
Matthew McGowan
a889638468
feat(swan_r5): adds a basic RTC implementation.
2022-06-10 17:37:32 -07:00
Dan Halbert
6e090c96a5
squeeze some specialized builds
2022-06-10 16:24:52 -04:00
Scott Shawcroft
6446010753
Wi-Fi autoconnect and title bar status
...
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD
in `/.env`. When both are defined, CircuitPython will attempt to
connect to the network even when user code isn't running. If the
user code attempts to a network with the same SSID, it will return
immediately. Connecting to another SSID will disconnect from the
auto-connected network. If the user code initiates the connection,
then it will be shutdown after user code exits. (Should match <8
behavior.)
This PR also reworks the default displayio terminal. It now supports
a title bar TileGrid in addition to the (newly renamed) scroll area.
The default title bar is the top row of the display and is positioned
to the right of the Blinka logo when it is enabled. The scroll area
is now below the Blinka logo.
The Wi-Fi auto-connect code now uses the title bar to show its
state including the IP address when connected. It does this through
the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s>
is the title bar string. This is commonly supported by terminals
so it should work over USB and UART as well.
Related to #6174
2022-06-09 14:55:54 -07:00
Pontus Oldberg
42f05a32a3
Merge branch 'adafruit:main' into main
2022-06-09 08:42:42 +02:00
Scott Shawcroft
9c20eb58e9
Merge pull request #6450 from mwisslead/rp2040_pulsein_common_hal_construct
...
Rp2040 pulsein improvements
2022-06-08 08:15:29 -07:00
Pontus Oldberg
5c13f844c7
Fixed pre-commit trailing whitespace
2022-06-08 16:43:49 +02:00
Pontus Oldberg
91000ea294
Adds support for Challenger RP2040 LoRa boards
2022-06-08 16:38:21 +02:00
Jeff Epler
0a38088075
Fix dependencies for translate.c again
2022-06-07 07:35:54 +02:00
Scott Shawcroft
2baf476530
Merge pull request #6463 from adafruit/7.3.x
...
Catch main up to 7.3.x
2022-06-06 11:58:05 -07:00
Scott Shawcroft
6b09f99eaa
Add back ULAB
2022-06-06 10:35:37 -07:00
Nathan Young
2f0d82a50b
Disable board.SPI() for Challenger NB RP2040 WiFi
...
This was done as a result of an issue with the SPI pin mappings.
Please refer to the following for additional information: https://ilabs.se/challenger-rp2040-wifi-spi-bug
2022-06-06 09:52:23 +02:00
Dan Halbert
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
Dan Halbert
ac282b2a73
Merge pull request #6440 from tannewt/translate_header
...
Switch translate() to the header file
2022-06-05 23:50:47 -04:00
Dan Halbert
a61c4c1af9
Merge pull request #6411 from fabaff/weact-studio-pico
...
Add support for WeAct Studio Pico
2022-06-05 19:17:56 -04:00
Fabian Affolter
7a073317f7
Update PID (0x102E)
2022-06-06 01:03:02 +02:00
Dan Halbert
c149bbdcfc
Merge pull request #6447 from SimonVail/main
...
Add files via upload
2022-06-05 17:11:44 -04:00
Dan Halbert
db6d506b15
Merge pull request #6456 from dhalbert/adafruit_feather_esp32s3_4mbflash_2mbpsram
...
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-05 12:31:20 -04:00
foamyguy
67de89861e
new argument for feather s3 tft display init
2022-06-04 11:36:45 -05:00
foamyguy
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
foamyguy
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
Scott Shawcroft
be6936c8ec
Shrink MatrixPortal M4 build
2022-06-03 18:57:01 -07:00
Dan Halbert
d1cdb72020
Update ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-06-03 18:21:20 -04:00
Scott Shawcroft
be67067809
Merge remote-tracking branch 'adafruit/main' into translate_header
2022-06-03 15:18:18 -07:00
Matthew McGowan
78e4b9446b
chore(swan_r5): pre-commit formatting
2022-06-03 15:12:41 -07:00
Scott Shawcroft
a4a744bccc
Merge pull request #6441 from gamblor21/static_ip
...
Static IP address for WiFi
2022-06-03 14:56:08 -07:00
Matthew McGowan
113b070e77
fix(swan_r5): 3v3 was enabled but then immediately reset. Moved initialization to reset_board which happens after reset_all_pins.
2022-06-03 14:19:47 -07:00
Dan Halbert
fdb133bbe8
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-02 21:09:37 -04:00
Scott Shawcroft
0d257fc4f8
Fix mpy-cross and unix builds
2022-06-02 12:30:19 -07:00
Dan Halbert
27fb96e6b0
Remove trailing whitespace
2022-06-01 21:35:01 -04:00
Dan Halbert
3ff7ed75c6
Merge pull request #6346 from Neradoc/cpx-frozen-lite
...
Move frozen adafruit_circuitplayground to CPX subdirectory
2022-06-01 21:15:46 -04:00
gamblor21
40e890323b
Add DNS optional to set IP
2022-06-01 20:13:51 -05:00
KurtE
14ab3c7375
ESP32 USE uart_param_config
...
Use this function instead of several individual configuration functions
to configure such things as Baud rate, transfer size, stop bits,
parity...
This function also resets both the RX and TX Hardware Fifo
reset functions are called to setup the hardware.
2022-06-01 17:09:44 -07:00
Scott Shawcroft
09c61efcff
Split partition from LTO enable
2022-06-01 11:12:14 -07:00
Scott Shawcroft
6d3698848c
Fix PDMIn.c formatting
2022-06-01 11:04:33 -07:00
gamblor21
4f6d4e2284
Doc fix and add set for DNS
2022-05-31 22:13:18 -05:00
Scott Shawcroft
7fc0aa5791
Fix windows and two samd builds
2022-05-31 14:48:41 -07:00
Scott Shawcroft
4d776339ad
Separate translate object control from LTO
2022-05-31 12:42:59 -07:00
SimonVail
b2344bcde2
Update pins.c
2022-05-30 11:52:29 -04:00
SimonVail
f36dbb386b
Add files via upload
2022-05-30 11:47:51 -04:00
EmergReanimator
e8dd5d35d6
# WARNING: head commit changed in the meantime
...
Fixed STM SPI frequency settings.
Corrected default frequency settings in common_hal_busio_spi_construct.
Fixed common_hal_busio_spi_get_frequency.
2022-05-29 16:13:38 +02:00
foamyguy
ffc451b338
argument for backlight_pwm_frequency and use it in pyportal titano build
2022-05-28 12:01:05 -05:00
Scott Shawcroft
3cc46c74b9
Fix compiles
2022-05-27 15:39:55 -07:00
gamblor21
90fe20a153
Adding manual IP address set
2022-05-27 15:33:54 -05:00
Scott Shawcroft
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
Scott Shawcroft
c676253834
Switch translate() to the header file
...
This allows the compile stage to optimize most of the translate()
function away and saves a ton of space (~40k on ESP). *However*, it
requires us to wait for the qstr output before we compile the rest
of our .o files. (Only qstr.o used to wait.)
This isn't as good as the current setup with LTO though. Trinket M0
loses <1k with this setup.
So, we should probably conditionalize this along with LTO.
2022-05-27 10:33:53 -07:00
Scott Shawcroft
dc5565a5ce
Merge pull request #6436 from dhalbert/judicious-lto
...
LTO: Use -flto and -flto-partition only as needed
2022-05-27 10:31:06 -07:00
Dan Halbert
947f564672
tune LTO on nrf
2022-05-26 22:16:41 -04:00
Scott Shawcroft
67e9fb13bc
Merge pull request #6437 from blues/7.3.x
...
swan_r5 improvements
2022-05-26 15:20:22 -07:00
Dan Halbert
ca085150ee
disable traceback on samd21; re-enable onewireio on Metro m0
2022-05-26 15:33:04 -04:00
Dan Halbert
95fc7e4713
harmless change to force all ports to build
2022-05-26 11:52:58 -04:00
Dan Halbert
d74193c298
Use -flto and -flto-partition only as needed
2022-05-26 11:36:41 -04:00
George White
8539d6518e
flip CTS and RTS pinmux to match RX and TX
2022-05-26 00:06:00 +00:00
George White
99b23b96d9
fix comment typo and mention datasheet
2022-05-26 00:03:46 +00:00
George White
fb3077ccc2
Implement UART hardware flow control on SAMD chips
2022-05-25 21:34:06 +00:00
Matthew McGowan
321163da1a
feat(swan_r5): blink the LED on startup. set VUSB_SELECT and DISCHARGE to floating to avoid any potential issues with them being outputs.
2022-05-25 14:22:19 -07:00
Matthew McGowan
65a5ad09ab
feat(swan_r5): define an ext attribute on the board, which contains attributes for the extended set of castellated pins
2022-05-25 14:21:03 -07:00
Matthew McGowan
5bbaa3b732
feat(swan_r5): the upper 1MB of flash (bank 2) is made available for the filesystem
2022-05-25 14:19:35 -07:00
Matthew McGowan
b607631ae1
feat(swan_r5): UF2 support, with UF2 family IDs assigned to stm32 chipsets.
2022-05-25 14:18:37 -07:00
Dan Halbert
38f91539dc
Merge pull request #6432 from CytronTechnologies/add-maker-zero-samd21
...
Add new board: Cytron Maker Zero SAMD21
2022-05-25 13:58:33 -04:00
Dan Halbert
1fb210bd40
Merge pull request #5491 from pypewpew/remove-gamepadshift
...
Remove gamepadshift module
2022-05-25 13:58:06 -04:00
Luqmanul Hakim Zulkifli
aef5bc40fb
Deleted white spaces
2022-05-26 00:13:27 +08:00
Dan Halbert
b143314b22
Espressif: fix allocation of multiple Incremental Encoders
2022-05-24 22:37:24 -04:00
Luqmanul Hakim Zulkifli
9ed71f0c09
Add Cytron Maker Zero SAMD21
2022-05-25 10:09:30 +08:00
Luqmanul Hakim Zulkifli
0b99967839
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:58 +08:00
Luqmanul Hakim Zulkifli
46f4fcc42f
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:17 +08:00
Luqmanul Hakim Zulkifli
9385f793dc
Add Cytron Maker Zero SAMD21
2022-05-25 10:07:33 +08:00
Luqmanul Hakim Zulkifli
6fa552e257
Delete board.c
2022-05-25 10:04:06 +08:00
Luqmanul Hakim Zulkifli
5453b331f7
Delete mpconfigboard.h
2022-05-25 10:03:53 +08:00
Luqmanul Hakim Zulkifli
8806f5b5d8
Delete mpconfigboard.mk
2022-05-25 10:03:45 +08:00
Luqmanul Hakim Zulkifli
9649d80ea3
Delete pins.c
2022-05-25 10:03:34 +08:00
Luqmanul Hakim Zulkifli
4e467b7f34
Add Cytron Maker Zero SAMD21
2022-05-25 09:46:20 +08:00
Radomir Dopieralski
c0152e7dab
Remove gamepadshift module
...
Everything should be using the keypad module instead.
Note: there are several boards that still had gamepadshift enabled. I
did not contact their authors to make sure they already switched to
keypad in their code and documentation. We should probably wait with
merging this for their go ahead.
2022-05-25 00:48:55 +02:00
Dan Halbert
791064a934
Merge pull request #6427 from dhalbert/8.0.0-onewireio
...
Remove busio.OneWire and bitbangio.OneWire in favor of onewireio.OneWire
2022-05-24 15:32:33 -04:00
Dan Halbert
ecd30d2338
Merge pull request #6428 from dhalbert/8.0.0-restore-rainbowio
...
restore rainbowio to small builds
2022-05-24 15:32:08 -04:00
Dan Halbert
8665e85ea6
Merge pull request #6424 from ladyada/main
...
add esp32s3 tft
2022-05-24 15:31:48 -04:00
Dan Halbert
99d7d0d8bb
Disable ulab for ESP32-S3 TFT
2022-05-24 14:59:34 -04:00
Scott Shawcroft
0ea72d61e0
Merge pull request #6425 from KurtE/teensy_retain_fs
...
Teensy Builds retain Filesystem
2022-05-24 11:03:47 -07:00
Dan Halbert
335c93c044
restore rainbowio to small builds
2022-05-24 12:34:08 -04:00
Dan Halbert
74c92ffe9e
Remove busio.OneWire and bitbangio.OneWire
2022-05-24 12:26:33 -04:00
Paint Your Dragon
92fa02effa
Change 12- to 16-bit scaling to match other ports
...
Result is identical, implementation just resembles other ports instead of being all 1337 about it.
2022-05-24 08:49:05 -07:00
Paint Your Dragon
c3f58193ca
Correctly scale analog reading per issue #4794
2022-05-24 08:46:39 -07:00
lady ada
e22de975b3
try just bitbangio remove
2022-05-24 11:46:03 -04:00
Paint Your Dragon
5ef1f2dd5a
Correctly scale analog reading per issue #4794
2022-05-24 08:45:14 -07:00
Paint Your Dragon
44b31b098e
Correctly scale analog reading per issue #4794
2022-05-24 08:44:09 -07:00
Paint Your Dragon
e9b9f0b13f
Correctly scale analog reading per issue #4794
2022-05-24 08:42:00 -07:00
Paint Your Dragon
eefba16644
Correctly scale analog reading per issue #4794
2022-05-24 08:40:51 -07:00
lady ada
9439ce04bd
try to remove some space?
2022-05-24 11:28:55 -04:00
KurtE
d47662c448
Teensy Builds retain Filesystem
...
Changed a few things in the link step that satisfies the teensy
loader apps, both the teensy.exe as well as the teensy_loader_cli
such that when you program the board again it should retain the
file sytem that is stored in the upper area of the Flash
2022-05-24 07:06:16 -07:00
lady ada
bb4beb3fab
add esp32s3 tft
2022-05-23 23:57:35 -04:00
Neradoc
3179db4ef4
move frozen adafruit_circuitplayground to express subdirectory
2022-05-23 22:11:26 +02:00
Dan Halbert
64df933a83
Merge pull request #6422 from dahanzimin/main
...
Repair mixgo_ce frozen lib to frozen/
2022-05-23 15:00:42 -04:00
arturo182
0f1973b037
Merge pull request #6418 from solderparty/stamp_round_board
...
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-23 19:42:56 +02:00
Scott Shawcroft
943ab120ad
Merge pull request #6414 from dhalbert/pico-sdk-1.3.1
...
update pico-sdk to 1.3.1
2022-05-23 07:31:05 -07:00
dahanzimin
6454c5895b
Repair import and stock in under the frozen / directory
2022-05-23 11:19:11 +08:00
Michael Wisslead
2b0518233b
rp2040 PulseIn improvements
2022-05-23 00:45:06 +00:00
Michael Wisslead
893fc66d16
Use common_hal_rp2pio_statemachine_construct for PulseIn
2022-05-23 00:45:06 +00:00
arturo182
d2d3b27822
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-22 15:52:25 +02:00
Dan Halbert
6f4f7e089e
Merge pull request #6383 from dahanzimin/main
...
Add MixGo CE board
2022-05-22 08:47:53 -04:00
大汉子民
e5a5ffb9b0
Update board.c
2022-05-22 11:37:39 +08:00
dahanzimin
37e376631a
Fix format issues
2022-05-22 11:22:58 +08:00
dahanzimin
b62799a798
Add mixgo_ ce_ Serial function, repair sdkconfig
2022-05-22 10:42:56 +08:00
Dan Halbert
9c643aa907
Merge branch '7.3.x' into merge-7.3.0-rc.1-to-main
2022-05-21 12:57:46 -04:00
Dan Halbert
338e14d9d4
shrink arduino_mkr1300
2022-05-21 10:21:59 -04:00
dahanzimin
3e47d24fb9
Update submodule and create tag
2022-05-21 10:52:14 +08:00
Dan Halbert
e852b28bb2
update pico-sdk to 1.3.1
2022-05-20 17:52:35 -04:00
Dan Halbert
309dab4c75
merge 7.3.0-rc.1 changes to main
2022-05-20 15:37:56 -04:00
Dan Halbert
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
Dan Halbert
3c20b5f95f
use validator in mimx UART constructor
2022-05-20 00:04:49 -04:00
大汉子民
4356a12504
Update mpconfigboard.mk
2022-05-20 10:55:23 +08:00
大汉子民
73f2621cda
Repair No newline at end of file
2022-05-20 10:38:14 +08:00
大汉子民
525262cd9a
Merge branch 'main' into main
2022-05-20 10:04:02 +08:00
dahanzimin
e3896be345
Modify mixgoce_ Lib is a submodule
2022-05-20 09:46:55 +08:00
Fabian Affolter
f1f9ba2371
Add support for WeAct Studio Pico
2022-05-19 23:51:25 +02:00
Dan Halbert
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
Neradoc
8987bf18d0
Add Winbond flash substitute to boards
2022-05-16 22:39:25 +02:00
Dan Halbert
624a00ac45
shrink circuitplayground_express_displayio
2022-05-14 08:54:46 -04:00
Dan Halbert
9fb4582cc8
Merge pull request #6393 from todbot/main
...
fix SPI pin names qtpy esp32s3
2022-05-13 21:54:55 -04:00
Dan Halbert
936f5bf23e
Merge pull request #6338 from jepler/fix-display-invalid-sh1107
...
Fix display invalid sh1107
2022-05-13 20:33:43 -04:00
Tod Kurt
d2d08fc944
fix SPI pin names qtpy esp32s3
2022-05-13 16:48:13 -07:00
Dan Halbert
64ca3aa359
Merge pull request #6387 from SimonVail/main
...
Lilygo TTGO T-OI Plus ESP32C3
2022-05-13 18:31:50 -04:00
Dan Halbert
951eea7748
Merge pull request #6391 from tekktrik/doc/add-additional-builtins-docs
...
Add additional documentation for modules, builtin exceptions
2022-05-13 15:59:39 -04:00
Dan Halbert
28b14e05e3
shrink thunderpack_v12
2022-05-13 15:45:12 -04:00
SimonVail
1f0bdad083
Update ports/espressif/boards/lilygo_ttgo_t-oi-plus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-05-13 15:02:26 -04:00
Kattni
395b550fe3
Merge pull request #6389 from tannewt/add_ble_user_reset
...
Add two stage reset for BLE
2022-05-13 14:28:43 -04:00
