Commit Graph

283 Commits

Author SHA1 Message Date
Scott Shawcroft e1df598199
Split displayio hardware support from core
These are moved:
* Display -> busdisplay.BusDisplay
* FourWire -> fourwire.FourWire
* EPaperDisplay -> epaperdisplay.EPaperDisplay
* I2CDisplay -> i2cdisplaybus.I2CDisplayBus

`paralleldisplay` is now `paralleldisplaybus` (and registered as
`paralleldisplay` too).

Bus related helpers are split out of display_core into bus_core.
It is in still displayio since it is a dependency of both
busdisplay and epaperdisplay.

Fixes #7667
2023-10-24 15:43:34 -07:00
Scott Shawcroft 168c40e940
Merge pull request #8508 from dhalbert/v1.21-merge
V1.21 merge
2023-10-24 15:36:06 -07:00
Jeff Epler 7ab5252cdd
Add CIRCUITPY_MESSAGE_COMPRESSION_LEVEL
to trade compile speed & flash size

Initially enable the faster mode on rp2040 and espressif, where there's
usually plenty of flash available (these advanced techniques save hundreds
to thousands of bytes, which is important on a lot of old samd21 boards
but is a drop in the lake of a 4MB flash chip)
2023-10-20 19:18:18 +01:00
Dan Halbert 4b42a6f4a0 restore old uzlib; remove remaining U and u prefixes 2023-10-19 21:29:57 -04:00
Scott Shawcroft 7bad82a219
C6 compiles, runs but wifi crashes 2023-09-22 10:02:35 -07:00
Jeff Epler ed9cacf41d
Add DotClockFramebuffer 2023-08-30 10:30:15 -05:00
Dan Halbert 2171e67c1b merge latest adafruit/main 2023-08-13 19:43:54 -04:00
Dan Halbert 850877a85f wip; fix generators; typos 2023-08-13 00:30:59 -04:00
Dan Halbert 465d1c673e wip 2023-08-03 23:29:00 -04:00
Jeff Epler 272a2dcdb0
Merge pull request #8218 from jepler/esp32-camera
Update the camera board to use ESP32-S3 microcontroller
2023-07-31 14:48:50 -05:00
Jeff Epler cd181eb5b4
expand on the 0/1 requirement 2023-07-31 10:44:06 -05:00
Jeff Epler e8307a4c02
enable-if-any/all deserve some commentary. 2023-07-31 10:21:53 -05:00
Dan Halbert 5cc42d5041
Merge pull request #8126 from jepler/update-ulab-6.3.2
update ulab to 6.3.2
2023-07-26 11:54:42 -04:00
Jeff Epler c026704fd2
gifio does require displayio 2023-07-26 08:54:02 -05:00
Jeff Epler d83b8db678
restore fontio define 2023-07-25 21:34:57 -05:00
Jeff Epler 9a18524c30
simplify circuitpy_mpconfig with enable-if-any, -all
and make corresponding simplifications in shared-bindings-matrix,
but directly using the final defines from CFLAGS instead of the
status quo.

The net changes are to disable audiocore & audiomixer on some espressif
devices that have no audio output at all. Other than that, the
shared-bindings-matrix seems to be identical.
2023-07-25 19:56:08 -05:00
Jeff Epler fd60cccb06
Re-enable ulab at the expense of some other modules
.. and gate audiomixer based on audiocore (should be no net change)

.. and get rid of now-redundant enables in the espressif mpconfigport
2023-07-25 16:01:11 -05:00
Jeff Epler 8579766ede
Optimize ulab for size on samd51/same51 2023-07-25 09:35:49 -05:00
Scott Shawcroft 2686beab36
Basic USB host support and keyboard workflow
Connects up read, write and ctrl_transfer to TinyUSB. USB Host
support is available on iMX RT and RP2040.

Fixes #6527 (imx) and fixes #5986 (rp2).
2023-07-10 14:22:21 -07:00
Jeff Epler d4913b04e0 rgbmatrix: update protomatter
and re-organize so that esp32 s2/s3 don't do as much at reset

.. it's not necessary (because most data is in esp-idf managed memory)
and doing this saves me from having to debug why reconstruct isn't working
properly on that platform.

This needs to be tested on other platforms again before being merged!
2023-06-08 10:43:32 -05:00
Scott Shawcroft 66edcf5d03
Add PicoDVI support
PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and
Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit
color are half resolution.

Memory layout is modified to give the top most 4k of ram to the
second core. Its MPU is used to prevent flash access after startup.

The port saved word is moved to a watchdog scratch register so that
it doesn't get overwritten by other things in RAM.

Right align status bar and scroll area. This normally gives a few
pixels of padding on the left hand side and improves the odds it is
readable in a case. Fixes #7562

Fixes c stack checking. The length was correct but the top was being
set to the current stack pointer instead of the correct top.
Fixes #7643

This makes Bitmap subscr raise IndexError instead of ValueError
when the index arguments are wrong.
2023-04-19 15:14:02 -07:00
Jeff Epler 05cf5213e2
Allow disabling each class in keypad
.. for boards like pewpewm4 which need a specific kind. And need
some space.
2023-04-01 19:22:52 -05:00
Jeff Epler 13e17e6dcd
Make synthio debuggable in unix coverage port 2023-04-01 11:46:36 -05:00
Jeff Epler 02f8a45dfa
synthio: allow increasing number of channels
12 channels works well on metro m7
2023-04-01 11:46:27 -05:00
hathach 8c1095b268
Merge branch 'main' into add-codespell 2023-03-23 14:09:57 +07:00
hathach fecc1bdedb
fix typos (partial) detected by codepell 2023-03-18 22:17:02 +07:00
Scott Shawcroft 5bb8a7a7c6
Improve iMX RT performance
* Enable dcache for OCRAM where the VM heap lives.
* Add CIRCUITPY_SWO_TRACE for pushing program counters out over the
  SWO pin via the ITM module in the CPU. Exempt some functions from
  instrumentation to reduce traffic and allow inlining.
* Place more functions in ITCM to handle errors using code in RAM-only
  and speed up CP.
* Use SET and CLEAR registers for digitalio. The SDK does read, mask
  and write.
* Switch to 2MiB reserved for CircuitPython code. Up from 1MiB.
* Run USB interrupts during flash erase and write.
* Allow storage writes from CP if the USB drive is disabled.
* Get perf bench tests running on CircuitPython and increase timeouts
  so it works when instrumentation is active.
2023-03-14 12:30:58 -07:00
Dan Halbert b6a7613350
Merge pull request #7470 from microdev1/espnow
Add ESP-NOW Support
2023-03-10 12:21:56 -05:00
Scott Shawcroft a8b34bd067
Merge pull request #7549 from gamblor21/gif_displayio_support
Animated GIF support
2023-02-21 11:39:29 -08:00
Mark fa435468fa
Merge branch 'main' into gif_displayio_support 2023-02-13 18:30:51 -06:00
Dan Halbert d8231f1588 Implement safemode.py 2023-02-13 18:26:38 -05:00
gamblor21 0c95e6a08e Moving to gifio module 2023-02-12 11:17:34 -06:00
MicroDev 14c3b52b8d
Merge branch 'main' into espnow 2023-02-03 01:37:07 +05:30
Neradoc f0058774d0 add CIRCUITPY_SKIP_SAFE_MODE_WAIT to circuitpy_mpconfig.mk
use #if (also a CIRCUITPY_ULAB)
2023-01-29 00:56:16 +01:00
MicroDev cda5689263
move `esp32_camera` to `espcamera` 2023-01-27 22:05:43 +05:30
MicroDev 7330c638b9
minimal changes to make espnow work 2023-01-20 14:12:55 +05:30
Dan Halbert 03b43b7b3f complete rework for microcontroller.cpu.frequency and wifi.radio MAC addresses 2023-01-02 11:45:58 -05:00
Scott Shawcroft f8ac1d9261
Rework the coproc API
It is now a generic `memorymap` API and an ESP specific `espulp` module.

Fixes #7218. Fixes #3234. Fixes #7300.
2022-12-19 14:08:38 -05:00
Jeff Epler 3459fe322b
Withdraw the _environ module
This existed solely for testing, so expose it a different way during
the unix coverage build

Also turn off os.getenv support on samd21.
2022-12-08 15:33:10 -06:00
Jeff Epler ef2bfdb5db
dotenv becomes settings.toml 2022-12-08 12:44:20 -06:00
Jeff Epler f5c637dc10
Add adafruit_pixelmap.PixelMap
.. a fast helper for animations. It is similar to and inspired by the
PixelMap helper in Adafruit LED Animation library, but with an extremely
fast 'paste' method for setting a series of pixels. This is a common
operation for many animations, and can give a substantial speed improvement.

It's named `adafruit_pixelmap` so that we can package a compatible version
in pure Python for systems that can't fit it in C in flash, or for
Blinka.

This is a proof of concept and can make a very fast comet animation:
```python
import time
import adafruit_pixelbuf
import adafruti_pixelmap
import board
import neopixel
from supervisor import ticks_ms
from adafruit_led_animation.animation.solid import Solid
from adafruit_led_animation import color

pixel_pin = board.GP0
pixel_num = 96

pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB")

evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2)))
odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4))
print(odd_indices)
odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices)
assert len(odds) == len(odd_indices)


comet_length = 16

comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4)
        for i in range(comet_length)]
comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4)
        for i in range(comet_length)]

pos1 = 0
pos2 = 96//4

while True:
    evens.paste(comet1, pos1, wrap=True, reverse=False, others=0)
    pos1 = (pos1 + 1) % len(evens)

    odds.paste(comet2, pos2, wrap=True, reverse=True, others=0)
    pos2 = (pos2 - 1) % len(odds)
    pixels.show()

    m = ticks_ms()
    if m % 2000 > 1000:
        time.sleep(.02)
```
2022-11-11 07:54:33 -06:00
microDev 5232e3f6c3
add coproc module 2022-10-20 09:09:44 +05:30
Dan Halbert 7e4b2a09eb
Merge pull request #7000 from MicroDev1/storage-extend
Add Storage Extension Support
2022-10-13 10:05:55 -04:00
Jeff Epler dcb650c513 pico w: add ssl module
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
2022-10-05 13:12:43 -04:00
Dan Halbert ed87579a65 add missing native modules to support matrix 2022-10-04 19:22:18 -04:00
microDev 9fe7308b88
conditionally add storage extension 2022-10-04 17:26:28 +05:30
Dan Halbert db065a299f
Merge pull request #6933 from jepler/🥧🐮
Implement a useful subset of `wifi` and `socketpool` modules on 🥧🐮
2022-09-28 18:09:24 -04:00
Jeff Epler 346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out 2022-09-28 10:06:33 -05:00
Dan Halbert c567b43441 add CIRCUITPY_USB_IDENTIFICATION to turn off on smallest builds 2022-09-20 14:32:38 -04:00
Dan Halbert 6bb47038d5 Merge remote-tracking branch 'adafruit/main' into adcdma 2022-09-15 20:42:51 -04:00