Commit Graph

100 Commits

Author SHA1 Message Date
Damien George 5889cf58db py/bc0: Order opcodes into groups based on their size and format. 2019-09-26 15:27:10 +10:00
Damien George 55fcb83a42 py/compile: Support multiple inline asm emitters. 2019-03-14 12:22:25 +11:00
Damien George d9d92f27d7 py/compile: Add support to select the native emitter at runtime. 2019-03-14 12:22:25 +11:00
Damien George 3b973a5658 py: Move mp_native_type_from_qstr() from emitnative.c to nativeglue.c. 2019-03-14 12:22:25 +11:00
Damien George 5a2599d962 py: Replace POP_BLOCK and POP_EXCEPT opcodes with POP_EXCEPT_JUMP.
POP_BLOCK and POP_EXCEPT are now the same, and are always followed by a
JUMP.  So this optimisation reduces code size, and RAM usage of bytecode by
two bytes for each try-except handler.
2019-03-05 16:09:58 +11:00
Damien George e328a5d469 py/scope: Optimise scope_find_or_add_id to not need "added" arg.
Taking the address of a local variable is mildly expensive, in code size
and stack usage.  So optimise scope_find_or_add_id() to not need to take a
pointer to the "added" variable, and instead take the kind to use for newly
added identifiers.
2018-10-28 00:38:18 +11:00
Damien George 80db30a510 py/emit: Completely remove set_native_type, arg type is set in compiler.
In viper mode, the type of the argument is now stored in id_info->flags.
2018-09-15 13:00:11 +10:00
Damien George 07caf4f969 py/emit: Remove need to call set_native_type to set viper return type.
Instead this return type is now stored in the scope_flags.
2018-09-15 12:41:25 +10:00
Damien George 1d7c221b30 py/emit: Remove need to call set_native_type to set native/viper mode.
The native emitter can easily determine the mode via scope->emit_options.
2018-09-15 12:17:14 +10:00
Damien George a3de776486 py/emitnative: Optimise and improve exception handling in native code.
Prior to this patch, native code would use a full nlr_buf_t for each
exception handler (try-except, try-finally, with).  For nested exception
handlers this would use a lot of C stack and be rather inefficient.

This patch changes how exceptions are handled in native code by setting up
only a single nlr_buf_t context for the entire function, and then manages a
state machine (using the PC) to work out which exception handler to run
when an exception is raised by an nlr_jump.  This keeps the C stack usage
at a constant level regardless of the depth of Python exception blocks.

The patch also fixes an existing bug when local variables are written to
within an exception handler, then their value was incorrectly restored if
an exception was raised (since the nlr_jump would restore register values,
back to the point of the nlr_push).

And it also gets nested try-finally+with working with the viper emitter.

Broadly speaking, efficiency of executing native code that doesn't use
any exception blocks is unchanged, and emitted code size is only slightly
increased for such function.  C stack usage of all native functions is
either equal or less than before.  Emitted code size for native functions
that use exception blocks is increased by roughly 10% (due in part to
fixing of above-mentioned bugs).

But, most importantly, this patch allows to implement more Python features
in native code, like unwind jumps and yielding from within nested exception
blocks.
2018-08-16 13:56:36 +10:00
Damien George 18e6358480 py/emit: Combine setup with/except/finally into one emit function.
This patch reduces code size by:

   bare-arm:   -16
minimal x86:  -156
   unix x64:  -288
unix nanbox:  -184
      stm32:   -48
     cc3200:   -16
    esp8266:   -96
      esp32:   -16

The last 10 patches combined reduce code size by:

   bare-arm:  -164
minimal x86: -1260
   unix x64: -3416
unix nanbox: -1616
      stm32:  -676
     cc3200:  -232
    esp8266: -1144
      esp32:  -268
2018-05-23 00:35:16 +10:00
Damien George 436e0d4c54 py/emit: Merge build set/slice into existing build emit function.
Reduces code size by:

   bare-arm:    +0
minimal x86:    +0
   unix x64:  -368
unix nanbox:  -248
      stm32:  -128
     cc3200:   -48
    esp8266:  -184
      esp32:   -40
2018-05-23 00:23:36 +10:00
Damien George d97906ca9a py/emit: Combine import from/name/star into one emit function.
Change in code size is:

   bare-arm:    +4
minimal x86:   -88
   unix x64:  -456
unix nanbox:   -88
      stm32:   -44
     cc3200:    +0
    esp8266:  -104
      esp32:    +8
2018-05-23 00:23:08 +10:00
Damien George 8a513da5a5 py/emit: Combine break_loop and continue_loop into one emit function.
Reduces code size by:

   bare-arm:    +0
minimal x86:    +0
   unix x64:   -80
unix nanbox:    +0
      stm32:   -12
     cc3200:    +0
    esp8266:   -28
      esp32:    +0
2018-05-23 00:23:04 +10:00
Damien George 6211d979ee py/emit: Combine load/store/delete attr into one emit function.
Reduces code size by:

   bare-arm:   -20
minimal x86:  -140
   unix x64:  -408
unix nanbox:  -140
      stm32:   -68
     cc3200:   -16
    esp8266:   -80
      esp32:   -32
2018-05-23 00:22:59 +10:00
Damien George a4941a8ba4 py/emit: Combine load/store/delete subscr into one emit function.
Reduces code size by:

   bare-arm:    -8
minimal x86:  -104
   unix x64:  -312
unix nanbox:  -120
      stm32:   -60
     cc3200:   -16
    esp8266:   -92
      esp32:   -24
2018-05-23 00:22:55 +10:00
Damien George d298013939 py/emit: Combine name and global into one func for load/store/delete.
Reduces code size by:

   bare-arm:   -56
minimal x86:  -300
   unix x64:  -576
unix nanbox:  -300
      stm32:  -164
     cc3200:   -56
    esp8266:  -236
      esp32:   -76
2018-05-23 00:22:47 +10:00
Damien George 26b5754092 py/emit: Combine build tuple/list/map emit funcs into one.
Reduces code size by:

   bare-arm:   -24
minimal x86:  -192
   unix x64:  -288
unix nanbox:  -184
      stm32:   -72
     cc3200:   -16
    esp8266:  -148
      esp32:   -32
2018-05-23 00:22:44 +10:00
Damien George e686c94052 py/emit: Combine yield value and yield-from emit funcs into one.
Reduces code size by:

   bare-arm:   -24
minimal x86:   -72
   unix x64:  -200
unix nanbox:   -72
      stm32:   -52
     cc3200:   -32
    esp8266:   -84
      esp32:   -24
2018-05-23 00:22:35 +10:00
Damien George 0a25fff956 py/emit: Combine fast and deref into one function for load/store/delete.
Reduces code size by:

   bare-arm:   -16
minimal x86:  -208
   unix x64:  -408
unix nanbox:  -248
      stm32:   -12
     cc3200:   -24
    esp8266:   -96
      esp32:   -44
2018-05-23 00:22:20 +10:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Alexander Steffen 299bc62586 all: Unify header guard usage.
The code conventions suggest using header guards, but do not define how
those should look like and instead point to existing files. However, not
all existing files follow the same scheme, sometimes omitting header guards
altogether, sometimes using non-standard names, making it easy to
accidentally pick a "wrong" example.

This commit ensures that all header files of the MicroPython project (that
were not simply copied from somewhere else) follow the same pattern, that
was already present in the majority of files, especially in the py folder.

The rules are as follows.

Naming convention:
* start with the words MICROPY_INCLUDED
* contain the full path to the file
* replace special characters with _

In addition, there are no empty lines before #ifndef, between #ifndef and
one empty line before #endif. #endif is followed by a comment containing
the name of the guard macro.

py/grammar.h cannot use header guards by design, since it has to be
included multiple times in a single C file. Several other files also do not
need header guards as they are only used internally and guaranteed to be
included only once:
* MICROPY_MPHALPORT_H
* mpconfigboard.h
* mpconfigport.h
* mpthreadport.h
* pin_defs_*.h
* qstrdefs*.h
2017-07-18 11:57:39 +10:00
Damien George dd11af209d py: Add LOAD_SUPER_METHOD bytecode to allow heap-free super meth calls.
This patch allows the following code to run without allocating on the heap:

    super().foo(...)

Before this patch such a call would allocate a super object on the heap and
then load the foo method and call it right away.  The super object is only
needed to perform the lookup of the method and not needed after that.  This
patch makes an optimisation to allocate the super object on the C stack and
discard it right after use.

Changes in code size due to this patch are:

   bare-arm: +128
    minimal: +232
   unix x64: +416
unix nanbox: +364
     stmhal: +184
    esp8266: +340
     cc3200: +128
2017-04-22 23:39:20 +10:00
Damien George 30b42dd72d py: Remove unused "use_stack" argument from for_iter_end emit function. 2017-02-16 18:38:06 +11:00
Damien George f4df3aaa72 py: Allow bytecode/native to put iter_buf on stack for simple for loops.
So that the "for x in it: ..." statement can now work without using the
heap (so long as the iterator argument fits in an iter_buf structure).
2017-02-16 18:38:06 +11:00
Damien George e920bab976 py/emitinline: Move common code for end of final pass to compiler.
This patch moves some common code from the individual inline assemblers to
the compiler, the code that calls the emit-glue to assign the machine code
to the functions scope.
2016-12-09 21:23:17 +11:00
Damien George dd53b12193 py/emitinline: Move inline-asm align and data methods to compiler.
These are generic methods that don't depend on the architecture and so
can be handled directly by the compiler.
2016-12-09 20:54:54 +11:00
Damien George f76b1bfa9f py: Add inline Xtensa assembler.
This patch adds the MICROPY_EMIT_INLINE_XTENSA option, which, when
enabled, allows the @micropython.asm_xtensa decorator to be used.

The following opcodes are currently supported (ax is a register, a0-a15):

    ret_n()
    callx0(ax)
    j(label)
    jx(ax)

    beqz(ax, label)
    bnez(ax, label)
    mov(ax, ay)
    movi(ax, imm) # imm can be full 32-bit, uses l32r if needed

    and_(ax, ay, az)
    or_(ax, ay, az)
    xor(ax, ay, az)
    add(ax, ay, az)
    sub(ax, ay, az)
    mull(ax, ay, az)

    l8ui(ax, ay, imm)
    l16ui(ax, ay, imm)
    l32i(ax, ay, imm)
    s8i(ax, ay, imm)
    s16i(ax, ay, imm)
    s32i(ax, ay, imm)
    l16si(ax, ay, imm)
    addi(ax, ay, imm)

    ball(ax, ay, label)
    bany(ax, ay, label)
    bbc(ax, ay, label)
    bbs(ax, ay, label)
    beq(ax, ay, label)
    bge(ax, ay, label)
    bgeu(ax, ay, label)
    blt(ax, ay, label)
    bnall(ax, ay, label)
    bne(ax, ay, label)
    bnone(ax, ay, label)

Upon entry to the assembly function the registers a0, a12, a13, a14 are
pushed to the stack and the stack pointer (a1) decreased by 16.  Upon
exit, these registers and the stack pointer are restored, and ret.n is
executed to return to the caller (caller address is in a0).

Note that the ABI for the Xtensa emitters is non-windowing.
2016-12-09 17:07:38 +11:00
Damien George 8e5aced1fd py: Integrate Xtensa assembler into native emitter.
The config option MICROPY_EMIT_XTENSA can now be enabled to target the
Xtensa architecture with @micropython.native and @micropython.viper
decorators.
2016-12-09 16:51:49 +11:00
Damien George c2713592bc py/emit.h: Remove long-obsolete declarations for cpython emitter. 2016-12-09 13:28:25 +11:00
Damien George a5624bf381 py: Combine 3 comprehension emit functions (list/dict/set) into 1.
The 3 kinds of comprehensions are similar enough that merging their emit
functions reduces code size.  Decreases in code size in bytes are:
bare-arm:24, minimal:96, unix(NDEBUG,x86-64):328, stmhal:80, esp8266:76.
2016-09-19 12:23:31 +10:00
Damien George ce8b4e8749 py: Combine continuous block of emit steps into with_cleanup emit call.
Because different emitters need to handle with-cleanup in different ways.
2016-04-07 08:50:38 +01:00
Damien George 8f54c08691 py/inlineasm: Add ability to specify return type of asm_thumb funcs.
Supported return types are: object, bool, int, uint.

For example:

@micropython.asm_thumb
def foo(r0, r1) -> uint:
    add(r0, r0, r1)
2016-01-27 14:27:10 +00:00
Damien George 5d66b427e2 py/emit: Change type of arg of load_const_obj from void* to mp_obj_t. 2015-11-29 14:25:04 +00:00
Damien George 65dc960e3b unix-cpy: Remove unix-cpy. It's no longer needed.
unix-cpy was originally written to get semantic equivalent with CPython
without writing functional tests.  When writing the initial
implementation of uPy it was a long way between lexer and functional
tests, so the half-way test was to make sure that the bytecode was
correct.  The idea was that if the uPy bytecode matched CPython 1-1 then
uPy would be proper Python if the bytecodes acted correctly.  And having
matching bytecode meant that it was less likely to miss some deep
subtlety in the Python semantics that would require an architectural
change later on.

But that is all history and it no longer makes sense to retain the
ability to output CPython bytecode, because:

1. It outputs CPython 3.3 compatible bytecode.  CPython's bytecode
changes from version to version, and seems to have changed quite a bit
in 3.5.  There's no point in changing the bytecode output to match
CPython anymore.

2. uPy and CPy do different optimisations to the bytecode which makes it
harder to match.

3. The bytecode tests are not run.  They were never part of Travis and
are not run locally anymore.

4. The EMIT_CPYTHON option needs a lot of extra source code which adds
heaps of noise, especially in compile.c.

5. Now that there is an extensive test suite (which tests functionality)
there is no need to match the bytecode.  Some very subtle behaviour is
tested with the test suite and passing these tests is a much better
way to stay Python-language compliant, rather than trying to match
CPy bytecode.
2015-08-17 12:51:26 +01:00
Damien George 59fba2d6ea py: Remove mp_load_const_bytes and instead load precreated bytes object.
Previous to this patch each time a bytes object was referenced a new
instance (with the same data) was created.  With this patch a single
bytes object is created in the compiler and is loaded directly at execute
time as a true constant (similar to loading bignum and float objects).
This saves on allocating RAM and means that bytes objects can now be
used when the memory manager is locked (eg in interrupts).

The MP_BC_LOAD_CONST_BYTES bytecode was removed as part of this.

Generated bytecode is slightly larger due to storing a pointer to the
bytes object instead of the qstr identifier.

Code size is reduced by about 60 bytes on Thumb2 architectures.
2015-06-25 14:42:13 +00:00
Damien George c8b60f013b py: Make viper codegen raise proper exception (ViperTypeError) on error.
This fixes a long standing problem that viper code generation gave
terrible error messages, and actually no errors on pyboard where
assertions are disabled.

Now all compile-time errors are raised as proper Python exceptions, and
are of type ViperTypeError.

Addresses issue #940.
2015-04-20 13:29:31 +00:00
Damien George 4112590a60 py, compiler: When just bytecode, make explicit calls instead of table.
When just the bytecode emitter is needed there is no need to have a
dynamic method table for the emitter back-end, and we can instead
directly call the mp_emit_bc_XXX functions.  This gives a significant
reduction in code size and a very slight performance boost for the
compiler.

This patch saves 1160 bytes code on Thumb2 and 972 bytes on x86, when
native emitters are disabled.

Overall savings in code over the last 3 commits are:

bare-arm: 1664 bytes.
minimal:  2136 bytes.
stmhal:    584 bytes (it has native emitter enabled).
cc3200:   1736 bytes.
2015-03-26 16:52:45 +00:00
Damien George a210c774f9 py, compiler: Remove emit_pass1 code, using emit_bc to do its job.
First pass for the compiler is computing the scope (eg if an identifier
is local or not) and originally had an entire table of methods dedicated
to this, most of which did nothing.  With changes from previous commit,
this set of methods can be removed and the methods from the bytecode
emitter used instead, with very little modification -- this is what is
done in this commit.

This factoring has little to no impact on the speed of the compiler
(tested by compiling 3763 Python scripts and timing it).

This factoring reduces code size by about 270-300 bytes on Thumb2 archs,
and 400 bytes on x86.
2015-03-26 16:52:45 +00:00
Damien George 542bd6b4a1 py, compiler: Refactor load/store/delete_id logic to reduce code size.
Saves around 230 bytes on Thumb2 and 750 bytes on x86.
2015-03-26 16:52:45 +00:00
Damien George 9c5cabb502 py: Give error for duplicate label in inline assembler. 2015-03-03 17:08:02 +00:00
Damien George 63f3832e81 py: Combine emit functions for jump true/false to reduce code size.
Saves 116 bytes for stmhal and 56 bytes for cc3200 port.
2015-02-28 15:04:06 +00:00
Damien George 8dfbd2d589 py: Make inline assembler raise proper SyntaxError exception on error.
Also gives line number of location of error.  Very useful!
2015-02-13 01:00:51 +00:00
Damien George 7d414a1b52 py: Parse big-int/float/imag constants directly in parser.
Previous to this patch, a big-int, float or imag constant was interned
(made into a qstr) and then parsed at runtime to create an object each
time it was needed.  This is wasteful in RAM and not efficient.  Now,
these constants are parsed straight away in the parser and turned into
objects.  This allows constants with large numbers of digits (so
addresses issue #1103) and takes us a step closer to #722.
2015-02-08 01:57:40 +00:00
Damien George 0d3cb6726d py: Change vstr so that it doesn't null terminate buffer by default.
This cleans up vstr so that it's a pure "variable buffer", and the user
can decide whether they need to add a terminating null byte.  In most
places where vstr is used, the vstr did not need to be null terminated
and so this patch saves code size, a tiny bit of RAM, and makes vstr
usage more efficient.  When null termination is needed it must be
done explicitly using vstr_null_terminate.
2015-01-28 23:43:01 +00:00
Damien George 0abb5609b0 py: Remove unnecessary id_flags argument from emitter's load_fast.
Saves 24 bytes in bare-arm.
2015-01-16 12:24:49 +00:00
Damien George dab1385177 py: Add load_const_obj to emitter, add LOAD_CONST_OBJ to bytecode.
This allows to directly load a Python object to the Python stack.  See
issue #722 for background.
2015-01-13 15:55:54 +00:00
Damien George 51dfcb4bb7 py: Move to guarded includes, everywhere in py/ core.
Addresses issue #1022.
2015-01-01 20:32:09 +00:00
Paul Sokolovsky 8a8c1fc82f py: Add basic framework for issuing compile/runtime warnings. 2015-01-01 22:09:18 +02:00