The reason it was separated is so that the low-level code could be put in
iRAM, for timing reasons. But:
1. Tests show that it's not necessary to have this code in iRAM for it to
function correctly, and taking it out of iRAM reclaims some of that precious
resource. Furthermore, even though these functions were in iRAM there were
some functions that it called (eg pin get/set functions) which were not in
iRAM, so partially defeated the purpose of putting the 1-wire code in iRAM.
2. It's easier to reuse this 1-wire code in other ports if it's in a single
file.
3. If it turns out that certain code does need to be in iRAM then one can
use the MP_FASTCODE macro to do that.
Previous to this patch, a label with value "0" was used to indicate an
invalid label, but that meant a wasted word (at slot 0) in the array of
label offsets. This patch adjusts the label indices so the first one
starts at 0, and the maximum value indicates an invalid label.
This patch fixes a bug whereby the Python stack was not correctly reset if
there was a break/continue statement in the else black of an optimised
for-range loop.
For example, in the following code the "j" variable from the inner for loop
was not being popped off the Python stack:
for i in range(4):
for j in range(4):
pass
else:
continue
This is now fixed with this patch.
This attempts to bootstrap network tests for MicroPython. This commits
sets test/net_inet/ as place for tests which require access to wide
Internet. They aren't intended to be run as part of the main testsuite,
instead to be run manually on demand.
test_tls_sites.py in particular check that it's possible to establish
SSL/TLS connection to select sites on the Internet: few references ones,
plus those for which problems were reported, and resolved.
Fixes for stmhal USB mass storage, lwIP bindings and VFS regressions
This release provides an important fix for the USB mass storage device in
the stmhal port by implementing the SCSI SYNCHRONIZE_CACHE command, which
is now require by some Operating Systems. There are also fixes for the
lwIP bindings to improve non-blocking sockets and error codes. The VFS has
some regressions fixed including the ability to statvfs the root.
All changes are listed below.
py core:
- modbuiltins: add core-provided version of input() function
- objstr: catch case of negative "maxsplit" arg to str.rsplit()
- persistentcode: allow to compile with complex numbers disabled
- objstr: allow to compile with obj-repr D, and unicode disabled
- modsys: allow to compile with obj-repr D and PY_ATTRTUPLE disabled
- provide mp_decode_uint_skip() to help reduce stack usage
- makeqstrdefs.py: make script run correctly with Python 2.6
- objstringio: if created from immutable object, follow copy on write policy
extmod:
- modlwip: connect: for non-blocking mode, return EINPROGRESS
- modlwip: fix error codes for duplicate calls to connect()
- modlwip: accept: fix error code for non-blocking mode
- vfs: allow to statvfs the root directory
- vfs: allow "buffering" and "encoding" args to VFS's open()
- modframebuf: fix signed/unsigned comparison pendantic warning
lib:
- libm: use isfinite instead of finitef, for C99 compatibility
- utils/interrupt_char: remove support for KBD_EXCEPTION disabled
tests:
- basics/string_rsplit: add tests for negative "maxsplit" argument
- float: convert "sys.exit()" to "raise SystemExit"
- float/builtin_float_minmax: PEP8 fixes
- basics: convert "sys.exit()" to "raise SystemExit"
- convert remaining "sys.exit()" to "raise SystemExit"
unix port:
- convert to use core-provided version of built-in import()
- Makefile: replace references to make with $(MAKE)
windows port:
- convert to use core-provided version of built-in import()
qemu-arm port:
- Makefile: adjust object-file lists to get correct dependencies
- enable micropython.mem_*() functions to allow more tests
stmhal port:
- boards: enable DAC for NUCLEO_F767ZI board
- add support for NUCLEO_F446RE board
- pass USB handler as parameter to allow more than one USB handler
- usb: use local USB handler variable in Start-of-Frame handler
- usb: make state for USB device private to top-level USB driver
- usbdev: for MSC implement SCSI SYNCHRONIZE_CACHE command
- convert from using stmhal's input() to core provided version
cc3200 port:
- convert from using stmhal's input() to core provided version
teensy port:
- convert from using stmhal's input() to core provided version
esp8266 port:
- Makefile: replace references to make with $(MAKE)
- Makefile: add clean-modules target
- convert from using stmhal's input() to core provided version
zephyr port:
- modusocket: getaddrinfo: Fix mp_obj_len() usage
- define MICROPY_PY_SYS_PLATFORM (to "zephyr")
- machine_pin: use native Zephyr types for Zephyr API calls
docs:
- machine.Pin: remove out_value() method
- machine.Pin: add on() and off() methods
- esp8266: consistently replace Pin.high/low methods with .on/off
- esp8266/quickref: polish Pin.on()/off() examples
- network: move confusingly-named cc3200 Server class to its reference
- uos: deconditionalize, remove minor port-specific details
- uos: move cc3200 port legacy VFS mounting functions to its ref doc
- machine: sort machine classes in logical order, not alphabetically
- network: first step to describe standard network class interface
examples:
- embedding: use core-provided KeyboardInterrupt object
The CC3100 only allows to set a timeout for receiving data, not for accept,
connect or send. But it can set non-blocking for all these operations and
this patch uses that feature to implement socket timeout in terms of non-
blocking behaviour combined with a loop.
Also, rename Direction.IN to Direction.INPUT and Direction.OUT to Direction.OUTPUT.
This simplifies using them. Prior to the nativeio split this would have led to
clutter in the top-level namespace but having digitalio prevents this.
Fixes#152
This method follows the new HW API and allows to set a hard or soft IRQ
callback when a Pin has a level change. It still remains to make this
method return a IRQ object.
In CPython 3.4 this raises a SyntaxError. In CPython 3.5+ having a
positional after * is allowed but uPy has the wrong semantics and passes
the arguments in the incorrect order. To prevent incorrect use of a
function going unnoticed it is important to raise the SyntaxError in uPy,
until the behaviour is fixed to follow CPython 3.5+.
These implementations are incorrect (eg f2d and d2f don't handle special
values like 0.0) and proper versions can be provided by libgcc (or
equivalent depending on the toolchain).
libgcc is now linked with the stmhal port so that library will provide
these functions from now on.
The latest fashion is pushing certificate sub-chains, instead of a single
certificate, during TLS handshake. These are pushed via single TLS record
and effectively put minimum size limit on TLS record buffer. Recently,
these commonly grew over 4K, so we have little choice but to adjust.
This patch fixes 2 things when printing a floating-point number that
requires rounding up of the mantissa:
- retain the correct precision; eg 0.99 becomes 1.0, not 1.00
- if the exponent goes from -1 to 0 then render it as +0, not -0
A previous fix improved the duty_cycle channel value computation by
removing the reliance on the PER register which gave old values. It
saved the period on the object but failed to set anything for reused
timers. So, this breaks it out into a separate array that can be
shared across all object regardless of whether it used a new or
existing timer.
Baremetal ports standardized on providing localtime(). localtime() offers
more functionality, in particular, strftime() can be completely implemented
in Python with localtime().
