Commit Graph

16 Commits

Author SHA1 Message Date
Scott Shawcroft 93ee54a2fb
Fix PWM status LED never_reset
It doesn't need never reset because the status LED is only active
when user code isn't.

This also fixes PWM never reset on espressif so that deinit will
undo it.

Fixes #6223
2022-11-15 16:14:31 -08:00
microDev 17ed2a6898
implement certain supervisor functions as properties
- disable_ble_workflow
- set_next_stack_limit
- set_rgb_status_brightness
2022-10-01 23:44:22 +05:30
Scott Shawcroft bdee6cf3b6
Don't update status LED color on brightness change
Brightness changes now happen when the LED isn't active or
initialized. When not init, CP may crash.

Fixes #5872
2022-02-17 14:21:03 -08:00
Scott Gauche 3b418dbddc change half_duplex to be on spi construct 2022-02-08 21:37:38 -05:00
Scott Shawcroft 13db65566d
ESP NeoPixel fixes
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.

Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.

Fixes #5679
2022-01-19 16:29:07 -08:00
Dan Halbert e8ea9c75a1 check for missing pins; deinit txrx leds 2021-11-30 19:16:21 -05:00
Scott Shawcroft f9f3894888
Support multiple status dotstars
Only supporting one left a white dotstar stranded.

Fixes #5170
2021-08-24 14:35:11 -07:00
Dan Halbert 81833035fc raytac_mdbt50q-rx 2021-08-04 15:47:19 -04:00
Scott Shawcroft e7fe0d9a71
Fix single neopixel status boards 2021-07-23 15:42:06 -07:00
Scott Shawcroft 70cbb4eddb
Support multiple status neopixels
Use the 10 neopixels on the playgrounds for status.

Fixes #5039
2021-07-23 15:17:09 -07:00
Scott Shawcroft ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
Now we use never_reset which is generally more correct and easier
to get right.

Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
Scott Shawcroft 499a4388cf
Handle inverted neopixel power 2021-05-19 17:29:02 -07:00
Scott Shawcroft 642fbcf87a
Handle status led power
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
Scott Shawcroft 1a0b4193b7
Simplify the status LED to save power
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
2021-05-13 14:41:20 -07:00
Hierophect 58630a844a Add feature conditionals and clean up 2019-07-22 12:58:28 -04:00
Scott Shawcroft 9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00