9f1eafc380
tests/io/bytesio_ext2: Remove dependency on specific EINVAL value
...
If MICROPY_USE_INTERNAL_ERRNO is disabled, MP_EINVAL is not guaranteed
to have the value 22, so we cannot depend on OSError(22,).
Instead, to support any given port's errno values, without relying
on uerrno, we just check that the args[0] is positive.
2018-05-01 15:48:43 +10:00
28c9824c51
stm32/boards/NUCLEO_H743ZI: Enable ADC peripheral.
2018-05-01 15:39:03 +10:00
8c12f1d916
stm32/adc: Add support for H7 MCU series.
...
ADC3 is used because the H7's internal ADC channels are connected to ADC3
and the uPy driver doesn't support more than one ADC.
Only 12-bit resolution is supported because 12 is hard-coded and 14/16 bits
are not recommended on some ADC3 pins (see errata).
Values from internal ADC channels are known to give wrong values at
present.
2018-05-01 15:36:11 +10:00
0f869bbbf1
ubinascii: some functions should refuse unicode for python3 compatibility
...
.. this maybe should be subject to MICROPY_CPYTHON_COMPAT, except that
is not defined in the main circuitpython ports so it would be a change
that makes no difference.
2018-04-30 20:06:29 -05:00
e7f463320f
tests: Add new tests for ubinascii differences
...
.. some of these tests currently fail, but a subsequent commit will
fix them.
2018-04-30 20:06:29 -05:00
dd0f8689a1
Merge pull request #786 from notro/rtc_set_datetime_precision
...
atmel-samd: RTC: Improve precision when setting datetime
2018-04-29 20:30:37 -07:00
6855541e33
Merge pull request #780 from sommersoft/esp8266_gpio16
...
Fix GPIO16 Board Reset; Updated Usage
2018-04-29 20:09:52 -07:00
62d7a800d7
atmel-samd: RTC: Improve precision when setting datetime
...
The prescaler is not reset when setting the counter so we can be off by
as much as 1023/1024 seconds. Fix this by resetting the RTC module.
2018-04-29 20:43:07 +02:00
396e4ffc34
implemented 'claim_pin' methodology; updated 'open_drain' handling
2018-04-28 17:27:23 +00:00
23e9c3bca7
esp32/modules: Add support scripts for WebREPL.
...
WebREPL now works on the esp32 in the same way it does on esp8266.
2018-04-27 23:58:51 +10:00
c1d4352e65
esp32/mpconfigport: Enable webrepl module and socket events.
2018-04-27 23:57:57 +10:00
999c8b9711
esp32/modsocket: Add support for registering socket event callbacks.
...
The esp8266 uses modlwip.c for its usocket implementation, which allows to
easily support callbacks on socket events (like when a socket becomes ready
for reading). This is not as easy to do for the esp32 which uses the
ESP-IDF-provided lwIP POSIX socket API. Socket events are needed to get
WebREPL working, and this patch provides a way for such events to work by
explicitly polling registered sockets for readability, and then calling the
associated callback if the socket is readable.
2018-04-27 23:57:26 +10:00
98b05e3614
esp32: Add support for and enable uos.dupterm().
2018-04-27 23:51:45 +10:00
04dc4a5034
esp32/mphalport: Improve mp_hal_stdout_tx_XXX functions.
...
This makes way for enabling uos.dupterm().
2018-04-27 23:49:21 +10:00
c0dd9be606
stm32/boards/NUCLEO_H743ZI: Use priority 0 for SysTick IRQ.
...
This follows how all other boards are configured.
2018-04-27 15:16:45 +10:00
deaa46aa66
py/nlrthumb: Fix Clang support wrt use of "return 0".
...
Clang defines __GNUC__ so we have to check for it specifically.
2018-04-27 15:10:42 +10:00
527ba0426c
stm32/system_stm32: Reconfigure SysTick IRQ priority for L4 MCUs.
...
After calling HAL_SYSTICK_Config the SysTick IRQ priority is set to 15, the
lowest priority. This commit reconfigures the IRQ priority to the desired
TICK_INT_PRIORITY value.
2018-04-27 12:54:35 +10:00
4e1f7d43eb
added exception for PULL_UP; corrected open_drain handling
2018-04-27 02:51:07 +00:00
4ed5865280
esp32/mphalport: Improve mp_hal_delay_us so it handles pending events.
...
Thanks to @bboser for the initial idea and implementation.
2018-04-26 20:21:33 +10:00
e1fe3abd09
esp32/mphalport: Use esp_timer_get_time instead of gettimeofday.
...
It's more efficient and improves accuracy.
2018-04-26 20:19:31 +10:00
c7818032b1
docs/library: Add ussl module to library index for unix port.
2018-04-26 17:14:51 +10:00
441ce2a78f
reset GPIO16 to input on deinit
2018-04-26 01:35:58 +00:00
83e390714f
Merge pull request #779 from tannewt/replace_logos
...
Replace MicroPython logos with CircuitPython logos
2018-04-25 18:04:00 -07:00
3d6a6b81a0
Replace MicroPython logos with CircuitPython logos
...
Fixes #306
2018-04-25 15:41:18 -07:00
bd5a5daaae
updated GPIO16 construct and handling
2018-04-25 03:59:36 +00:00
e70ece4c41
now checks for proper pin in is_pin_free; initialize GPIO16 as input in reset_pins
2018-04-25 03:57:09 +00:00
8cadcc8e83
Merge pull request #776 from dhalbert/hid_gamepad
...
HID gamepad support
2018-04-24 14:27:04 -04:00
48f595ee13
convert wrapper class to just a module
2018-04-24 13:28:26 -04:00
9254f365d6
stm32/machine_i2c: Provide hardware I2C for machine.I2C on F7 MCUs.
2018-04-24 23:48:04 +10:00
19778d0a3c
stm32/i2c: Add low-level I2C driver for F7 MCUs.
2018-04-24 23:48:04 +10:00
0c54d0c288
stm32: Rename legacy pyb.I2C helper functions to start with pyb_i2c_.
2018-04-24 17:32:16 +10:00
b73adcc3d9
stm32: Rename i2c.c to pyb_i2c.c.
...
i2c.c implements the legacy pyb.I2C class so rename the file to make this
explicit, and also to make room for an improved I2C driver.
2018-04-24 16:23:36 +10:00
9daa1a68d8
HID gamepad support
2018-04-23 23:51:23 -04:00
8b91260169
stm32/dac: Support MCUs that don't have TIM4/5 and use new HAL macro.
2018-04-24 12:07:59 +10:00
8a949ba599
stm32: Introduce MICROPY_PY_STM config to include or not the stm module.
...
By default the stm module is included in the build, but a board can now
define MICROPY_PY_STM to 0 to not include this module. This reduces the
firmware by about 7k.
2018-04-24 12:01:49 +10:00
d0e00d7fbe
Added built to example
2018-04-23 20:01:53 +02:00
0de8697315
Added note on USB CDC bootloader
2018-04-23 19:58:29 +02:00
ce9f05f91b
add missing files
2018-04-24 00:51:44 +07:00
50e7a4caa8
add bootloader hex
2018-04-24 00:19:04 +07:00
a60efa8202
stm32/uart: Allow ctrl-C to work with UARTs put on REPL via os.dupterm.
2018-04-23 20:44:30 +10:00
513e537215
stm32/uart: Allow ctrl-C to issue keyboard intr when REPL is over UART.
2018-04-23 17:06:40 +10:00
d870a4e835
stm32/boards/NUCLEO_H743ZI: Enable RNG for this board.
2018-04-23 16:43:16 +10:00
70a6a15f8c
stm32/rng: Set RNG clock source for STM32H7.
2018-04-23 16:43:05 +10:00
bdff68db9c
extmod/modlwip: Check if getaddrinfo() constraints are supported or not.
...
In particular don't issue a warning if the passed-in constraints are
actually supported because they are the default values.
2018-04-23 16:38:20 +10:00
f7be5f9bfa
tools/upip: Upgrade upip to 1.2.4.
...
Uses new pypi.org URL, and now creates a socket with the address parameters
returned by getaddrinfo().
2018-04-23 16:11:27 +10:00
58ba74194e
Merge pull request #765 from jerryneedell/jerryn_tick
...
modify tick_delay to handle SysTick->VAL rollover
2018-04-20 15:40:00 -04:00
bef05ffbf1
cleanup in tick.c
2018-04-20 15:23:03 -04:00
fe738598da
modify tick.c to simplify - remove interupt disable from common_hal_pulseio_pulsein_resume
2018-04-20 11:59:33 -04:00
b5ee3b2f21
esp32/README.md: Fix typo readme.
2018-04-20 16:23:55 +10:00
9adfd14644
stm32/sdcard: Implement BP_IOCTL_SEC_COUNT to get size of SD card.
2018-04-20 16:09:03 +10:00
Mike Wadsten
iabdalkader
Jeff Epler
Scott Shawcroft
Noralf Trønnes
sommersoft
Damien George
Ayke van Laethem
Scott Shawcroft
Dan Halbert
Kevin Townsend
hathach
Jerry Needell
Shanee Vanstone
Peter D. Gray