djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
31,186 Commits 21 Branches 274 Tags 785 MiB
4bb475b930
Commit Graph

10030 Commits

Author SHA1 Message Date
Phil Underwood
4bb475b930 formatting 2023-06-17 22:49:47 +01:00
Phil Underwood
ec1e7a03b3 Reset UART on deinit, reduces power consumption 2023-06-17 22:42:12 +01:00
leosun
7354e2ad03 fix invalid pin error when create busio.SPI 
on specific SCK/MOSI/MISO pins, the `common_hal_busio_spi_construct`
method always skip miso pins which will lead to a `invalid pin`
exception when SPI initilized
 2023-06-15 07:48:19 +08:00
Jeff Epler
666fb94ca3
Merge pull request #8056 from jepler/matrixportal-s3 
Add Adafruit MatrixPortal S3 board def & update protomatter
 2023-06-13 19:34:08 -05:00
Melissa LeBlanc-Williams
46de2cb682 Add buttons and accelerometer interrupt 2023-06-13 07:59:33 -07:00
Scott Shawcroft
a5e3c6ee82
Merge pull request #8077 from jepler/nrf-synthio 
nrf52840: allow 12 voices
 2023-06-12 12:44:08 -07:00
Seon Rozenblum
14af662ab9 Added support for Unexpected Maker NANOS3 2023-06-12 20:32:46 +10:00
Jeff Epler
d5a2293784 nrf52840: allow 12 voices 
In my testing, the feather bluefruit can do 12 voices at 48kHz!
This is a simple case (no LFOs, no ring modulation) so other situations might
require a lower sample rate, fewer voices, or both.

The sound is a little artifacty & low-fi but I think that's down to the speaker
& use of PWM instead of I2S.
 2023-06-09 11:30:12 -05:00
Dan Halbert
4d5caff0ed fix missing newline 2023-06-08 13:02:24 -04:00
Dan Halbert
46ddacddde
Merge branch 'main' into efr32-doc-fixes 2023-06-08 12:57:09 -04:00
Dan Halbert
6cf7e45f10
Merge pull request #8037 from jpconstantineau/fix-PCA10100 
fix to make buttons and leds compatible with pca10056
 2023-06-08 12:56:09 -04:00
Mario Bodemann
1e3f1d745a Update badger2040 start sequence for more contrast 
This change is taken from the pico-sdk: https://github.com/pimoroni/pimoroni-pico/blob/main/drivers/uc8151_legacy/uc8151_legacy.cpp#L67-L120 and increases the contrast of pictures sent dramatically. It comes with the expense of using way more time when updating though.
 2023-06-08 18:25:45 +02:00
Jeff Epler
d4913b04e0 rgbmatrix: update protomatter 
and re-organize so that esp32 s2/s3 don't do as much at reset

.. it's not necessary (because most data is in esp-idf managed memory)
and doing this saves me from having to debug why reconstruct isn't working
properly on that platform.

This needs to be tested on other platforms again before being merged!
 2023-06-08 10:43:32 -05:00
Jeff Epler
c408193ffe
Merge pull request #8048 from jepler/synthio-biquad 
Synthio: switch to per-note biquad filtering
 2023-06-07 14:48:31 -05:00
applecuckoo
40a31390aa
Remove available modules section 2023-06-07 07:30:02 +12:00
Dan Halbert
e631350b9b
Merge pull request #8070 from dhalbert/port-specific-submodules 
Provide port-specific fetch of submodules
 2023-06-06 14:46:39 -04:00
Dan Halbert
38f6fa27e3 fetch-port-submodules; fetch-all-submodules 2023-06-05 17:23:34 -04:00
applecuckoo
2d78cf3428
Merge branch 'adafruit:main' into efr32-doc-fixes 2023-06-06 08:56:40 +12:00
Jeff Epler
ce84ecf3f6
Fix flash size 2023-06-01 18:57:18 -05:00
Jeff Epler
2fb42579e8
Add minimally tested Adafruit MatrixPortal S3 board def 
tested:
 * board.LED
 * neopixel as status LED
 * i2c scan finds lis3dh sensor
 * psram capacity

not tested:
 * rgb matrix      o_O
 * the gpio pins

Introduce new `board` properties for matrixportal-style boards:
 * MTX_COMMON
 * MTX_ADDRESS

These are intended to simplify use of the RGBMatrix constructor:
```py
matrix = RGBMatrix(..., addr_pins=MTX_ADDRESS[:3], **MTX_COMMON)
```
removing the need for sending in the following individual parameters:
 * rgb_pins
 * clock_pin
 * latch_pin
 * output_enable_pins
and making construction of a 16/32/64-row display easy by slicing a tuple
of all address pins rather than writing out the individual pins. If it
works out it'll be ported back to the matrixportal m4 as well.
 2023-06-01 17:23:34 -05:00
Pierre Constantineau
6fd700eb11 added HW_LED_STATUS as requested 2023-06-01 10:56:43 -06:00
Scott Shawcroft
f2f19e93ec
Fix listing 2023-06-01 09:47:30 -07:00
tomiahola
31f2faa977
SAM E54 Xplained Pro: add support for SST26VF064B flash chip 2023-06-01 08:36:25 +03:00
Jeff Epler
fed8d5825b
synthio: add biquad filter type & basic filter calculations 
the filter cannot be applied as yet.
 2023-05-29 09:50:18 -05:00
hyx0329
d73f390a4d
M60 keyboard: allow run on battery 
This also expose the battery control pin as BATTERY_ENABLE,
so users can fully power off the keyboard.
 2023-05-28 12:11:34 +08:00
applecuckoo
60935c29eb
Fix up EFR32 port readme 2023-05-28 16:01:59 +12:00
Pierre Constantineau
60ce38ed8b fix trailing space of pins.c 2023-05-26 13:30:32 -06:00
Pierre Constantineau
325037b75e fix to make buttons and leds compatible with pca10056 2023-05-26 13:17:05 -06:00
Dan Halbert
ff2003145f
Merge pull request #8025 from tkroo/patch-1 
update spi pins to match schematic
 2023-05-23 23:11:16 -04:00
Dan Halbert
b9bb966835
Merge pull request #8026 from phamhuyvn/patch-1 
Update pins.c
 2023-05-23 23:10:45 -04:00
Dan Halbert
713d86f42b
Merge pull request #8021 from SiliconLabs/dev 
Silabs fixes, BLE bonding and peripheral changes
 2023-05-23 23:10:19 -04:00
phamhuyvn
2d7fa6dd8a
Update pins.c 
Fixed Button_R from GPIO6 to GPIO7
Fixed LCD_BACKLIGHT from GPIO29 to GPIO26
 2023-05-24 08:44:57 +07:00
David Sullivan
d570b8b4ef update spi pins to match schematic 2023-05-23 17:42:36 -07:00
David Sullivan
72b1bc890f
Update spi pins in mpconfigboard.h 2023-05-23 17:27:53 -07:00
David Sullivan
3f845fe8fd board files for lolin-s3-mini 2023-05-23 14:24:28 -07:00
Dan Halbert
b26e4ca0ae
Merge pull request #7985 from jepler/synthio-lfo-dag 
synthio: Add LFOs
 2023-05-23 15:48:11 -04:00
Dan Halbert
2422179419
Merge pull request #8014 from tkroo/lolin-c3-pico 
Board files for LOLIN C3 PICO
 2023-05-23 15:02:20 -04:00
Scott Shawcroft
596773286d
Merge pull request #8016 from charlieh0tel/new-mimxrt1060-evkb-board 
Adds MIMXRT1060-EVKB as new board.
 2023-05-23 11:11:32 -07:00
Christopher Hoover
49b1368d65 Changed PID to 0x813C. 2023-05-22 20:06:50 -07:00
David Sullivan
a163273ee0
Update ports/espressif/boards/lolin_c3_pico/mpconfigboard.h 
update board I2C pins.

Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2023-05-22 19:00:16 -07:00
Scott Shawcroft
9040ac8bc6
Merge pull request #8003 from dhalbert/esp-touch-alarm-fix 
Esp touch alarm fix
 2023-05-22 13:43:54 -07:00
David Sullivan
a5df186fa7 change copyright notice 2023-05-22 13:30:36 -07:00
Scott Shawcroft
3f7e6db4fa
Merge pull request #8015 from dhalbert/rp2040-sleep-memory 
RP2040 SleepMemory
 2023-05-22 13:08:37 -07:00
David Sullivan
7048ce46b1 match pins to what wemos uses 2023-05-22 10:06:50 -07:00
David Sullivan
393c0bb1f6 move sck, scl, and sda pin assignments 2023-05-21 23:27:58 -07:00
Christopher Hoover
73299ae48c Adds new board for MIMRT1060-EVKB (not to be confused with MIMRT1060-EVK). 2023-05-21 17:42:30 -07:00
Dan Halbert
955d2723d0 RP2040 SleepMemory 2023-05-21 19:05:25 -04:00
David Sullivan
0a1b2f8771 include neopixel lib 2023-05-21 14:30:51 -07:00
David Sullivan
a64d66846b remove leftover files 2023-05-21 12:45:23 -07:00
David Sullivan
ebd7e29b98 create files 2023-05-21 11:35:11 -07:00