ff927cb106
stmhal/spi: Clean and/or invalidate D-cache before SPI DMA transfers.
...
On MCUs with a cache (eg F7) this must be done or else the SPI data that is
transferred is incorrect.
2017-03-28 12:54:01 +11:00
9a1b3da158
stmhal/board: Fix existing and add more pin defs for NUCLEO_F767ZI.
2017-03-28 12:42:23 +11:00
8b36664e17
stmhal/boards: Fix alt-func config for PA5 of STM32F767.
2017-03-28 12:41:55 +11:00
dbb2aea428
zephyr/prj_base.conf: Disable legacy kernel compatibility.
...
This keeps dependency on mdef, sysgen and other stuff which complicates
build integration.
2017-03-27 17:06:30 +03:00
54507f78ee
py/objmap: Convert mp_uint_t to size_t.
2017-03-27 12:19:24 +11:00
f648e5442b
esp8266/modesp: Remove long-obsolete and unused espconn bindings.
2017-03-27 12:05:18 +11:00
734775524e
tests/basics: Add test for super() when self is closed over.
2017-03-27 11:29:11 +11:00
40c1272e55
py/compile: When compiling super(), handle closed-over self variable.
...
The self variable may be closed-over in the function, and in that case the
call to super() should load the contents of the closure cell using
LOAD_DEREF (before this patch it would just load the cell directly).
2017-03-27 11:27:08 +11:00
a0973b09ce
py/vm: Fix VM opcode tracing to print correct stack pointer.
...
Also const_table is now moved to the code_state->fun_bc structure.
2017-03-27 10:52:04 +11:00
220df8544b
zephyr/zephyr_getchar: Use native k_sem instead of legacy nano_sem.
2017-03-27 00:41:58 +03:00
06af64a78a
nrf5/bluetooth: Adding template functions for service discovery in bluetooth driver.
2017-03-26 22:59:30 +02:00
0914b34193
nrf5/bluetooth: Adding function to register gattc event handler (central).
2017-03-26 22:57:07 +02:00
025f07dbab
nrf5/bluetooth: Adding intermediate gattc callback function type in bluetooth driver.
2017-03-26 22:51:10 +02:00
49cce723a9
nrf5/bluetooth: Turning off debug logging in bluetooth driver, which does not work well with bluetooth REPL mode.
2017-03-26 21:06:17 +02:00
2f2e67e9bd
nrf5/bluetooth: Fixing some smaller tab errors in the bluetooth driver.
2017-03-26 21:05:06 +02:00
cd2149a47f
nrf5/bluetooth: Updating bluetooth le driver to handle GAP conn param update request. Also updating minor syntax in previous switch case.
2017-03-26 21:02:25 +02:00
fb983c7692
nrf5/boards: Inrease heap size in the nrf52832 w/s132 bluetooth stack linker script.
2017-03-26 20:46:23 +02:00
c230bc021a
nrf5/modules/ubluepy: Update connect method to parse dev_addr parameter and pass it to the bluetooth driver, going through a allocated heap buffer. Adding call to the bluetooth driver to issue a connect. Hardcoding address type for now.
2017-03-26 20:45:21 +02:00
bcf4631e0a
nrf5/bluetooth: Updating connect function in the bluetooth driver to do a successful connect to a peripheral device.
2017-03-26 20:43:43 +02:00
3f810daeb3
py/obj: Change mp_uint_t to size_t for mp_obj_get_array_fixed_n len arg.
2017-03-26 19:20:06 +11:00
9c388f66cf
esp8266/modesp: Use mp_obj_str_get_str instead of mp_obj_str_get_data.
2017-03-26 19:19:48 +11:00
b568448306
extmod/modlwip: Use mp_obj_str_get_str instead of mp_obj_str_get_data.
2017-03-26 19:19:35 +11:00
fb139a4ba6
README: Change Travis & Coveralls badges to not use link references.
...
Link references don't seem to work anymore.
2017-03-26 17:03:54 +11:00
99866a00a0
py/nlrx86: Better check for Zephyr (requires 1.7).
2017-03-26 00:33:23 +03:00
4d147beedb
nrf5/modules/ubluepy: Adding template function for central connect() in peripheral object.
2017-03-25 17:51:52 +01:00
098e64b122
nrf5/modules/ubluepy: Adding locals dict to Scan Entry introducing function to retreive Scan Data. Not working as expected together with .attr. It looks like locals dict functions are treated to be attributes and cannot be resolved.
2017-03-25 17:39:44 +01:00
fa17eabce9
README: Describe extmod/ dir.
2017-03-25 17:12:24 +03:00
c16d1c07ca
README: Add link to docs.micropython.org.
2017-03-25 17:07:57 +03:00
29424304d9
unix: Use mp_obj_str_get_str instead of mp_obj_str_get_data.
2017-03-25 19:54:07 +11:00
ab5689bc9d
py/objarray: Use mp_obj_str_get_str instead of mp_obj_str_get_data.
2017-03-25 19:53:31 +11:00
64a4f11b2d
py: Remove MP_STATE_CTX, use MP_STATE_THREAD instead (it's an alias).
...
MP_STATE_CTX was recently aliased to MP_STATE_THREAD and can now be
removed.
2017-03-24 18:43:28 +11:00
707f16b05c
py: Use mp_locals/mp_globals accessor funcs instead of MP_STATE_CTX.
...
To improve maintainability of the code.
2017-03-24 18:41:11 +11:00
f4ee1ba9b4
py/objnamedtuple: Use size_t where appropriate, instead of mp_uint_t.
2017-03-24 17:25:25 +11:00
d1b93ced78
py/objtype: Use size_t where appropriate, instead of mp_uint_t or uint.
2017-03-24 16:58:13 +11:00
bfb48c1620
tests/float: Add tests for round() of inf, nan and large number.
2017-03-24 11:00:45 +11:00
c236ebfea7
py/modbuiltins: Allow round() to return a big int if necessary.
...
Previous to this patch, if the result of the round function overflowed a
small int, or was inf or nan, then a garbage value was returned. With
this patch the correct big-int is returned if necessary and exceptions are
raised for inf or nan.
2017-03-24 11:00:45 +11:00
125eae1ba3
py/modbuiltins: For round() builtin use nearbyint instead of round.
...
The C nearbyint function has exactly the semantics that Python's round()
requires, whereas C's round() requires extra steps to handle rounding of
numbers half way between integers. So using nearbyint reduces code size
and potentially eliminates any source of errors in the handling of half-way
numbers.
Also, bare-metal implementations of nearbyint can be more efficient than
round, so further code size is saved (and efficiency improved).
nearbyint is provided in the C99 standard so it should be available on all
supported platforms.
2017-03-24 11:00:45 +11:00
fb161aa45a
lib/libm: Add implementation of nearbyintf, from musl-1.1.16.
2017-03-24 10:38:11 +11:00
f38b0ba037
nrf5/bluetooth: Adding function for connecting to a device (in central role). Not yet tested.
2017-03-23 21:03:40 +01:00
bacb52aa2d
tests/float: Add tests for math funcs that return ints.
...
One should test bigint, inf and nan to make sure all cases are covered.
2017-03-23 23:54:10 +11:00
c073519ec8
py/objint: Handle special case of -0 when classifying fp as int.
...
Otherwise -0.0 is classified as a bigint, which for builds without bigints
will lead unexpectedly to an overflow.
2017-03-23 23:51:35 +11:00
febeff4af4
py/modmath: Allow trunc/ceil/floor to return a big int if necessary.
...
Previous to this patch, if the result of the trunc/ceil/floor functions
overflowed a small int, or was inf or nan, then a garbage value was
returned. With this patch the correct big-int is returned if necessary,
and exceptions are raised for inf or nan.
2017-03-23 22:57:08 +11:00
f64a3e296e
py/lexer: Remove obsolete comment, since lexer can now raise exceptions.
2017-03-23 16:40:24 +11:00
60656eaea4
py: Define and use MP_OBJ_ITER_BUF_NSLOTS to get size of stack iter buf.
...
It improves readability of code and reduces the chance to make a mistake.
This patch also fixes a bug with nan-boxing builds by rounding up the
calculation of the new NSLOTS variable, giving the correct number of slots
(being 4) even if mp_obj_t is larger than the native machine size.
2017-03-23 16:36:08 +11:00
507119f4d8
py/sequence: Convert mp_uint_t to size_t where appropriate.
2017-03-23 16:23:20 +11:00
c88cfe165b
py: Use size_t as len argument and return type of mp_get_index.
...
These values are used to compute memory addresses and so size_t is the
more appropriate type to use.
2017-03-23 16:17:40 +11:00
3f3df43501
msvc: Remove directory with generated files when cleaning.
...
This assures after cleaning all build artefacts (qstr related files,
generated version header) have been removed.
2017-03-23 15:49:57 +11:00
c61131380d
windows: Make msvc project file support any version from VS2013 to VS2017
...
Instead of having the PlatformToolset property hardcoded to a specific
version just set it to the value of DefaultPlatformToolset: this gets
defined according to the commandline environment in which the build was
started.
Instead of just supporting VS2015 the project can now be built by any
version from VS2013 to VS2017 and normally future versions as well, without
quirks like VS asking whether you want to upgrade the project to the latest
version (as was the case when opening the project in VS2017) or not being
able to build at all (as was the case when opening the project in VS2013).
Also adjust the .gitignore file to ignore any artefacts from VS2017.
2017-03-23 15:44:27 +11:00
92cd000842
minimal/Makefile: Change C standard from gnu99 to c99.
2017-03-23 15:41:38 +11:00
4afa782fb4
bare-arm/Makefile: Change C standard from gnu99 to c99.
2017-03-23 15:41:04 +11:00
Damien George
Paul Sokolovsky
Glenn Ruben Bakke
stijn