Commit Graph

943 Commits

Author SHA1 Message Date
iabdalkader 463a275bc4 stm32/powerctrl: On H7, re-enable disabled OSCs/PLLs on exit from STOP.
This commit saves OSCs/PLLs state before STOP mode and restores them on
exit.  Some boards use HSI48 for USB for example, others have PLL2/3
enabled, etc.
2020-12-07 16:58:38 +11:00
iabdalkader 3e5dd2dbcc stm32/powerctrl: Fix STOP mode voltage scaling on H7 REV V devices. 2020-12-07 16:58:00 +11:00
iabdalkader e9e619fa24 stm32/powerctrl: Define RCC_SR_SFTRSTF flag for H747. 2020-12-07 16:57:29 +11:00
iabdalkader ce9197eb20 stm32/Makefile: Disable text compression in debug builds.
Otherwise the flash overflows.

Fixes issue #6653.
2020-12-07 16:45:15 +11:00
iabdalkader 849748873c stm32/modmachine: Add device and revision ids to machine.info(). 2020-12-07 16:39:18 +11:00
Jim Mussared 0e8af2b370 extmod/modbluetooth: Add API for L2CAP channels.
Also known as L2CAP "connection oriented channels". This provides a
socket-like data transfer mechanism for BLE.

Currently only implemented for NimBLE on STM32 / Unix.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-24 01:07:17 +11:00
Damien George 64180f0742 extmod/machine_i2c: Add init protocol method for generic I2C bindings.
Hardware I2C implementations must provide a .init() protocol method if they
want to support reconfiguration.  Otherwise the default is that i2c.init()
raises an OSError (currently the case for all ports).

mp_machine_soft_i2c_locals_dict is renamed to mp_machine_i2c_locals_dict to
match the generic SPI bindings.

Fixes issue #6623 (where calling .init() on a HW I2C would crash).

Signed-off-by: Damien George <damien@micropython.org>
2020-11-23 19:45:04 +11:00
Jim Mussared 240b3de8bc stm32/rfcore: Depend on NimBLE only when BLE enabled.
This fixes the build for non-STM32WB based boards when the NimBLE submodule
has not been fetched, and also allows STM32WB boards to build with BLE
disabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-18 14:45:51 +11:00
Jim Mussared 21c293fbcd stm32/rfcore: Don't send HCI ACL cmds while another is pending.
And, for TX, the next/prev entries ane unused so set them to NULL to
indicate this.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:09:12 +11:00
Jim Mussared 119c88ef17 stm32/flash: Implement WB55 flash locking.
This is needed to moderate concurrent access to the internal flash, as
while an erase/write is in progress execution will stall on the wireless
core due to the bus being locked.

This implements Figure 10 from AN5289 Rev 3.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:08:30 +11:00
Jim Mussared a64121b0d4 stm32/rfcore: Make RX IRQ schedule the NimBLE handler.
This commit switches the STM32WB HCI interface (between the two CPUs) to
require the use of MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS, and as a
consequence to require NimBLE.  IPCC RX IRQs now schedule the NimBLE
handler to run via mp_sched_schedule.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-16 17:04:27 +11:00
Jim Mussared 61d1e4b01b extmod/nimble: Make stm32 and unix NimBLE ports use synchronous events.
This changes stm32 from using PENDSV to run NimBLE to use the MicroPython
scheduler instead.  This allows Python BLE callbacks to be invoked directly
(and therefore synchronously) rather than via the ringbuffer.

The NimBLE UART HCI and event processing now happens in a scheduled task
every 128ms.  When RX IRQ idle events arrive, it will also schedule this
task to improve latency.

There is a similar change for the unix port where the background thread now
queues the scheduled task.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Jim Mussared 81e92d3d6e extmod/modbluetooth: Re-instate optional no-ringbuf modbluetooth.
This requires that the event handlers are called from non-interrupt context
(i.e. the MicroPython scheduler).

This will allow the BLE stack (e.g. NimBLE) to run from the scheduler
rather than an IRQ like PENDSV, and therefore be able to invoke Python
callbacks directly/synchronously.  This allows writing Python BLE handlers
for events that require immediate response such as _IRQ_READ_REQUEST (which
was previous a hard IRQ) and future events relating to pairing/bonding.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Damien George cc2a35b7b2 stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.
Devices with RTC backup-batteries have been shown (very rarely) to have
incorrect RTC prescaler values.  Such incorrect values mean the RTC counts
fast or slow, and will be wrong forever if the power/backup-battery is
always present.

This commit detects such a state at start up (hard reset) and corrects it
by reconfiguring the RTC prescaler values.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-13 11:23:52 +11:00
Damien George a0623a081c stm32/Makefile: Allow boards to extend all SRC variables.
And rename SRC_HAL -> HAL_SRC_C and SRC_USBDEV -> USBDEV_SRC_C for
consistency with other source variables.

Follow on from 0fff2e03fe

Signed-off-by: Damien George <damien@micropython.org>
2020-11-13 11:22:28 +11:00
Sébastien NEDJAR b04240cb77 stm32/Makefile: Make the generation of `firmware.bin` explicit.
The file `$(BUILD)/firmware.bin` was used by the target `deploy-stlink` and
`deploy-openocd` but it was generated indirectly by the target
`firmware.dfu`.

As this file could be used to program boards directly by a Mass Storage
copy, it's better to make it explicitly generated.

Additionally, some target are refactored to remove redundancy and be more
explicit on dependencies.
2020-11-12 15:22:44 +11:00
Damien George b99300b53e stm32/boardctrl: Define MICROPY_BOARD_EARLY_INIT alongside others.
Signed-off-by: Damien George <damien@micropython.org>
2020-11-11 21:47:13 +11:00
Damien George 4c3976bbca stm32: Add MICROPY_BOARD calls in various places in stm32_main.
For a board to have full configurability of the soft reset loop.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-11 21:41:04 +11:00
Damien George 1e297c8898 stm32/main: Move update_reset_mode to outside the soft-reset loop.
Running the update inside the soft-reset loop will mean that (on boards
like PYBD that use a bootloader) the same reset mode is used each
reset loop, eg factory reset occurs each time.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-11 21:41:04 +11:00
Damien George 97960dc7de stm32: Support C++ code and user C modules written in C++.
Also build user C modules as part of the stm32 CI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:35:36 +11:00
Damien George df3b466d6c stm32/boards: Factor out common data/bss/heap/stack linker sections.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:31:59 +11:00
Damien George 3e455e9792 stm32/rng: Use SysTick+RTC+unique-id to seed pRNG for MCUs without RNG.
The same seed will only occur if the board is the same, the RTC has the
same time (eg freshly powered up) and the first call to this function (eg
via an "import random") is done at exactly the same time since reset.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 14:14:40 +11:00
robert 59019d7f75 stm32/mpconfigport.h: Seed the urandom module on import.
For seeding the rng_get function is used, which is also the heart of
uos.urandom and pyb.rng, and is a hardware RNG where available.
2020-10-29 14:12:53 +11:00
Damien George 0118c07916 stm32/machine_adc: Fix ADC auto-calibration to run when ADC not enabled.
Prior to this commit, the ADC calibration code was never executing because
ADVREGEN bit was set making the CR register always non-zero.

This commit changes the logic so that ADC calibration is always run when
the ADC is disabled and an ADC channel is initialised.  It also uses the LL
API functions to do the calibration, to make sure it is done correctly on
each MCU variant.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 11:09:43 +11:00
Damien George 581d43b774 stm32/usbd_cdc_interface: Check and handle CDC TX wrap-overflow.
If the device is not connected over USB CDC to a host then all output to
the CDC (eg initial boot messages) is written to the CDC TX buffer with
wrapping, so that the most recent data is retained when the USB CDC is
eventually connected (eg so the REPL banner is displayed upon connection).

This commit fixes a bug in this behaviour, which was likely introduced in
e4fcd216e0, where the initial data in the CDC
TX buffer is repeated multiple times on first connection of the device to
the host.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-22 15:32:41 +11:00
iabdalkader a93d9b8c2d stm32: Fix broken build when FAT FS multi-partition is disabled. 2020-10-22 14:58:29 +11:00
Jim Mussared 893f75546c stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Increase GET_STATE timeout.
When installing WS firmware, the very first GET_STATE can take several
seconds to respond (especially with the larger binaries like
BLE_stack_full).

Allows stm.rfcore_sys_hci to take an optional timeout, defaulting to
SYS_ACK_TIMEOUT_MS (which is 250ms).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:45:03 +11:00
Jim Mussared dfb63b5613 stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix bad variable name.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:44:58 +11:00
Jim Mussared 520bb88d70 stm32/boards/NUCLEO_WB55/rfcore_firmware.py: Fix flash unlock.
The flash can sometimes be in an already-unlocked state, and attempting to
unlock it again will cause an immediate reset.  So make _Flash.unlock()
check FLASH_CR_LOCK to get the current state.

Also fix some magic numbers for FLASH_CR_LOCK AND FLASH_CR_STRT.

The machine.reset() could be removed because it no longer crashes now that
the flash unlock is fixed.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-10-16 10:43:36 +11:00
Jim Mussared fa12bfc227 stm32/rfcore: Update to support WS=1.9.0.0.4.
This WS update to 1.9.0.0.4 broke the workaround used in rfcore for
OCF_CB_SET_EVENT_MASK2, so fix it to support WS 1.8 and 1.9.
2020-10-09 23:52:35 +11:00
Jim Mussared 222ec1a4a8 stm32/boards/NUCLEO_WB55: Add standalone WB55 FUS/WS firmware updater.
This commit adds a script that can be run on-device to install FUS and WS
binaries from the filesystem.  Instructions for use are provided in
the rfcore_firmware.py file.

The commit also removes unneeded functionality from the existing rfcore.py
debug script (and renames it rfcore_debug.py).
2020-10-08 17:39:15 +11:00
Jim Mussared 7c76a2dfcf stm32/rfcore: Add Python API for basic rfcore operations.
The new functions provide FUS/WS status, version and SYS HCI commands:
- stm.rfcore_status()
- stm.rfcore_fw_version(fw_id)
- stm.rfcore_sys_hci(ogf, ocf, cmd)
2020-10-08 17:37:11 +11:00
iabdalkader 9855b9cd82 stm32/sdcard: Fix H7 build when using SDMMC2.
Changes are:
- Fix missing IRQ handler when SDMMC2 is used instead of SDMMC1 with H7
  MCUs.
- Removed outdated H7 series compatibility macros.
- Defined common IRQ handler macro for F4 series.
2020-10-06 23:33:38 +11:00
iabdalkader 7497d891a7 stm32/sdio: Don't change any DMA2 settings on H7 MCUs.
DMA2 clock and registers should be left in their current state in the H7
build.
2020-10-06 23:31:08 +11:00
Damien George 0fff2e03fe stm32/Makefile: Allow boards to extend SRC_C, SRC_O and OBJ variables.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-02 15:46:13 +10:00
Damien George d4b61b0017 extmod/utime_mphal: Add generic utime.time_ns() function.
It requires mp_hal_time_ns() to be provided by a port.  This function
allows very accurate absolute timestamps.

Enabled on unix, windows, stm32, esp8266 and esp32.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 14:20:42 +10:00
Damien George 71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 9e0533b9e1 extmod/machine_spi: Remove "id" arg in SoftSPI constructor.
The SoftSPI constructor is now used soley to create SoftSPI instances, it
can no longer delegate to create a hardware-based SPI instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 3e16763201 stm32/rfcore: Fix FUS layout and size of ipcc_device_info_table_t.
The device info table has a different layout when core 2 is in FUS mode.
In particular it's larger than the 32 bytes used when in WS mode and if the
correct amount of space is not allocated then the end of the table may be
overwritten with other data (eg with FUS version 0.5.3).  So update the
structure to fix this.

Also update rfcore.py to disable IRQs (which are enabled by rfcore.c), to
not depend on uctypes, and to not require the asm_thumb emitter.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-22 14:08:22 +10:00
Tweako 8af9796b16 stm32/led: Support PWM output without TIM3.
For example, the STM32WB55 doesn't have TIM3 but can still drive LEDs using
PWM on other timers.
2020-09-18 18:37:11 +10:00
Damien George 8f20cdc353 all: Rename absolute time-based functions to include "epoch".
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values.  And
different ports may use a different Epoch.

To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").

Along with this rename, the following things have changed:

- mp_hal_time_ns() is now specified to return the number of nanoseconds
  since the Epoch, rather than since 1970 (but since this is an internal
  function it doesn't change anything for the user).

- littlefs timestamps on the esp8266 have been fixed (they were previously
  off by 30 years in nanoseconds).

Otherwise, there is no functional change made by this commit.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 17:20:34 +10:00
Damien George bd7af6151d ports: Add utime.gmtime() function.
To portably get the Epoch.  This is simply aliased to localtime() on ports
that are not timezone aware.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:25:36 +10:00
Damien George b31cb21a39 stm32/servo: Fix angle and speed methods to work again with -ve args.
Fixes a regression introduced by 70affd9ba2

Fixes issue #6403

Signed-off-by: Damien George <damien@micropython.org>
2020-09-12 13:47:59 +10:00
Damien George 709398daae stm32/rtc.h: Include py/obj.h to make header self contained.
Signed-off-by: Damien George <damien@micropython.org>
2020-09-10 20:46:40 +10:00
Damien George 547688c58c stm32/usb: Don't nul pyb_hid_report_desc if MICROPY_HW_USB_HID disabled.
So this code can be used if pyb_hid_report_desc is not included in the
port's root pointer list.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-10 20:46:35 +10:00
Jim Mussared 632e3b7acc stm32/boards/NUCLEO_WB55: Add Python helper code for rfcore.
This allows prototyping rfcore.c improvements from Python.

This was mostly written by @dpgeorge with small modifications to work after
rfcore_init() by @jimmo.
2020-09-08 23:54:02 +10:00
Jim Mussared e2390d5a2f stm32/rfcore: Enable RX IRQ on BLE IPCC channel for better performance.
Before this change there was up to a 128ms delay on incoming payloads from
CPU2 as it was polled by SysTick.  Now the RX IRQ immediately schedules the
PendSV.
2020-09-08 23:53:12 +10:00