The unix port has a custom select module which only works with objects that
have a file descriptor, eg files and sockets. On the other hand, bare
metal ports use the common extmod/modselect.c implementation of the select
module that supports polling of arbitrary objects, as long as those objects
provide a MP_STREAM_POLL in their ioctl implementation (which can be done
in C or Python).
This commit removes the unix-specific code and makes unix use the common
one provided by extmod/modselect.c instead. All objects with file
descriptors implement MP_STREAM_POLL so they continue to work.
Signed-off-by: Damien George <damien@micropython.org>
When building for a specific board this must be specified in make
submodules. I.e. make BOARD=STM32F769DISC submodules.
Signed-off-by: Rene Straub <rene@see5.ch>
In applications that use little memory and run GC regularly, the cost of
the sweep phase quickly becomes prohibitives as the amount of RAM
increases.
On an ESP32-S3 with 2 MB of external SPIRAM, for example, a trivial GC
cycle takes a minimum of 40ms, virtually all of it in the sweep phase.
Similarly, on the UNIX port with 1 GB of heap, a trivial GC takes 47 ms,
again virtually all of it in the sweep phase.
This commit speeds up the sweep phase in the case most of the heap is empty
by keeping track of the ID of the highest block we allocated in an area
since the last GC.
The performance benchmark run on PYBV10 shows between +0 and +2%
improvement across the existing performance tests. These tests don't
really stress the GC, so they were also run with gc.threshold(30000) and
gc.threshold(10000). For the 30000 case, performance improved by up to
+10% with this commit. For the 10000 case, performance improved by at
least +10% on 6 tests, and up to +25%.
Signed-off-by: Damien George <damien@micropython.org>
On esp32, the build output consists of:
- micropython.elf
- micropython.map
- micropython.bin -- application only
- micropython.uf2 -- application only
- firmware.bin -- bootloader, partition table and application
Currently everything is available at the download page except
micropython.bin. This commit adds that file but with the extension changed
to .app-bin, to distinguish it from .bin (the full thing).
Signed-off-by: Damien George <damien@micropython.org>
Listing the IDF version number in the board description is not as important
as it once was, when the IDF was still undergoing a lot of changes. Now,
all builds use IDF 5.x and it's possible to query the exact version with
platform.platform().
Signed-off-by: Damien George <damien@micropython.org>
Otherwise constructing an invalid SPI instance (eg machine.SPI(3)) will
mess up machine.SPI(2)'s state before it's detected that it's an invalid
SPI id.
Signed-off-by: Damien George <damien@micropython.org>
On ESP32C3 it's not doing anything. On ESP32S3 the original code prevented
prevented machine.SPI(1) from working.
Signed-off-by: Damien George <damien@micropython.org>
SPI3_HOST is not a macro but rather an enum, so use SOC_SPI_PERIPH_NUM to
detect if it's defined.
Fixes issue #11919.
Signed-off-by: Damien George <damien@micropython.org>
Previously this was explicitly enabled on esp32/stm32/renesas/mimxrt/samd,
but didn't get a default feature level because it wasn't in py/mpconfig.h.
With this commit it's now enabled at the "extra features" level, which adds
rp2, unix-standard, windows, esp8266, webassembly, and some nrf boards.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This way, a bare `-` is never interpreted as an option, even before
`--`. Filenames starting with `-` still need to be put after `--`.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Unless -o is given, output defaults to stdout unless a source file is
given (in which case the source file name is used to derive an output
file name).
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
This changes the ESP32 WDT implementation to use a custom handle so that it
becomes possible to reset the WDT from a thread.
By default esp_task_wdt_add subscribes the task_id of the current task.
That means that if we're running in a different task we are unable to reset
the WDT, which prevents feeding the WDT from a thread directly, or even
from a timer (which may randomly run in a different task when there's
multiple threads).
As an added bonus, the name we set makes the error clearly specify that it
was the user-specified WDT that reset the chip.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Since commit beeb74 we already check in modussl_mbedtls whether this
function is provided by the ESP-IDF before calling it, thus we no longer
need to define it here in order to compile.
Removing it so that if CONFIG_MBEDTLS_DEBUG is defined we do not cause any
'multiple definition' compile errors.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
When MICROPY_SCHEDULER_STATIC_NODES is enabled, the logic is unchanged.
When MICROPY_SCHEDULER_STATIC_NODES is disable, sched_state is now always
initialised to MP_SCHED_IDLE when calling mp_init(). For example, the use
of mp_sched_vm_abort(), if it aborts a running scheduled function, can lead
to the scheduler starting off in a locked state when the runtime is
restarted, and then it stays locked. This commit fixes that case by
resetting sched_state.
Signed-off-by: Damien George <damien@micropython.org>
Also update zlib & gzip docs to describe the micropython-lib modules.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This provides similar functionality to the former zlib.DecompIO and
especially CPython's gzip.GzipFile for both compression and decompression.
This class can be used directly, and also can be used from Python to
implement (via io.BytesIO) zlib.decompress and zlib.compress, as well as
gzip.GzipFile.
Enable/disable this on all ports/boards that zlib was previously configured
for.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Collapsing the two adjacent calls to outbits saves 32 bytes.
Bringing defl_static.c into lz77.c allows better inlining, saves 24 bytes.
Merge the Outbuf/uzlib_lz77_state_t structs, a minor simplification that
doesn't change code size.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This library used a mix of "tinf" and "uzlib" to refer to itself. Remove
all use of "tinf" in the public API.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit makes the following changes:
- Replace 256-byte reverse-bits-in-byte lookup table with computation.
- Replace length and distance code lookup tables with computation.
- Remove comp_disabled check (it's unused).
- Make the dest_write_cb take the data pointer directly, rather than the
Outbuf.
Saves 500 bytes on PYBV11.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The compression algorithm implemented in this commit uses much less memory
compared to the standard way of implementing it using a hash table and
large look-back window. In particular the algorithm here doesn't allocate
hash table to store indices into the history of the previously seen text.
Instead it simply does a brute-force-search of the history text to find a
match for the compressor. This is slower (linear search vs hash table
lookup) but with a small enough history (eg 512 bytes) it's not that slow.
And a small history does not impact the compression too much.
To give some more concrete numbers comparing memory use between the
approaches:
- Standard approach: inplace compression, all text to compress must be in
RAM (or at least memory addressable), and then an additional 16k bytes
RAM of hash table pointers, pointing into the text
- The approach in this commit: streaming compression, only a limited amount
of previous text must be in RAM (user selectable, defaults to 512 bytes).
To compress, say, 1k of data, the standard approach requires all that data
to be in RAM, plus an additional 16k of RAM for the hash table pointers.
With this commit, you only need the 1k of data in RAM. Or if it's
streaming from a file (or elsewhere), you could get away with only 256
bytes of RAM for the sliding history and still get very decent compression.
In summary: because compression takes such a large amount of RAM (in the
standard algorithm) and it's not really suitable for microcontrollers, the
approach taken in this commit is to minimise RAM usage as much as possible,
and still have acceptable performance (speed and compression ratio).
Signed-off-by: Damien George <damien@micropython.org>
There are enough places that implement __exit__ by forwarding directly to
mp_stream_close that this saves code size.
For the cases where __exit__ is a no-op, additionally make their
MP_STREAM_CLOSE ioctl handled as a no-op.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This will be replaced with a new deflate module providing the same
functionality, with an optional frozen Python wrapper providing a
replacement zlib module.
binascii.crc32 is temporarily disabled.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
On targets that provide a reference TinyUSB implementation, like ESP32,
the SDK already defines and implements standard callback functions such
as tud_cdc_line_state_cb(). This causes a symbol clash when enabling
shared implementations like the MicroPython 1200 touch functionality.
To avoid this symbol clash, add an optional macro to allow ports to
use a different function name in the shared implementation.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Implement a standard machine.bootloader() method for ESP32-series devices.
No default implementation, each board can enable it as required.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Some targets like the ESP32-S3 use the IDF Component Manager to provide
additional dependencies to the build. Make sure to include these extra
components when collecting properties used by MicroPython-specific build
steps, like qstr preprocessing.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Re-enable some features required for the board to still build and the lora
driver to run.
This board only has 192KB of flash total, so default stm32 build is very
close to the limit.
Before:
LINK build-B_L072Z_LRWAN1/firmware.elf
text data bss dec hex filename
184352 68 14112 198532 30784 build-B_L072Z_LRWAN1/firmware.elf
(12256 bytes free)
After:
LINK build-B_L072Z_LRWAN1/firmware.elf
text data bss dec hex filename
155028 68 14052 169148 294bc build-B_L072Z_LRWAN1/firmware.elf
(41580 bytes free)
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This adds named-pins support to the esp32 port, following other ports.
Since the name of esp32 CPU pins is just GPIOx, where x is an integer, the
Pin.cpu dict is not supported and CPU pins are just retrieved via their
existing integer "name" (the cost of adding Pin.cpu is about 800 bytes,
mostly due to the additional qstrs).
What this commit supports is the Pin.board dict and constructing a pin by
names given by a board. These names are defined in a pins.csv file at the
board level. If no such file exists then Pin.board exists but is empty.
As part of this commit, pin and pin IRQ objects are optimised to reduce
their size in flash (by removing their gpio_num_t entry). The net change
in firmware size for this commit is about -132 bytes.
Signed-off-by: Damien George <damien@micropython.org>
Sometimes mp_hal_get_pin_obj() was used. machine_pin_find() is the
internal name, and the external interface is mp_hal_get_pin_obj().
Signed-off-by: robert-hh <robert@hammelrath.com>
