Jeff Epler
72bce51ce3
restore submodule commits
2022-09-28 14:48:54 -05:00
Jeff Epler
6c3cdceb45
Implement scan, connect, ping
...
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
Dan Halbert
de80db681f
Merge pull request #6915 from dhalbert/ringbuf-cleanup
...
ringbuf cleanup
2022-09-25 17:50:21 -04:00
Dan Halbert
d44edc4a0c
Merge pull request #6937 from jepler/issue6839
...
Use new unique ID for this board
2022-09-24 23:55:06 -04:00
Jeff Epler
f12136af7f
esp32-camera: sync doc with code.
...
Closes : #6836
2022-09-23 08:54:00 -05:00
Jeff Epler
5bbbca4d44
lock and unlock i2c bus around any ops that might access it
2022-09-22 17:03:05 -05:00
Jeff Epler
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
Dan Halbert
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
2b25a5d574
update esp32-camera
2022-09-13 13:16:37 -04:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
microDev
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
Dan Halbert
52080e24eb
status bar control
2022-08-30 15:23:44 -04:00
Jeff Epler
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c
...
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
2022-08-28 16:46:50 -05:00
Jeff Epler
dc27fb967d
error at runtime if no psram actually reserved
2022-08-26 09:27:50 -05:00
Jeff Epler
9f22e75e5e
error if camera is configured but no psram
2022-08-26 09:27:50 -05:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
Scott Shawcroft
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix
...
Fix ESP32 touch; rework common code a bit
2022-08-17 10:24:22 -07:00
Dan Halbert
2bc8d73776
Fix ESP32 touch; rework common code a bit
2022-08-16 20:04:27 -04:00
Martin
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
lady ada
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
MicroDev
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset
...
Audit all boards with LED pins defined
2022-08-13 15:25:02 +05:30
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
Scott Shawcroft
5823bcc744
Merge branch 'main' into c3_short_send
2022-08-11 12:45:02 -07:00
Scott Shawcroft
f1053fb963
Introduce port_yield()
...
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
2022-08-11 11:25:34 -07:00
Scott Shawcroft
f9d724c09e
Fix retries after successful connection.
...
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)
Also, remove extra code from websocket that is leftover from
debugging.
2022-08-10 15:24:08 -07:00
Jeff Epler
c2a45c1f27
Merge pull request #6739 from jepler/qrio-esp32camera
...
Enable qrio to work with rgb565 data, including byte-swapped data
2022-08-10 13:54:40 -05:00
Scott Shawcroft
7a5d2e81fc
Merge pull request #6734 from dhalbert/remove-autobrightness
...
Remove support for auto-brightness
2022-08-10 10:22:53 -07:00
Jeff Epler
86f9d98a5d
fix documentation of framebuffer_count
2022-08-10 11:12:54 -05:00
Dan Halbert
af64faae1e
switch back one I2C message
2022-08-10 12:06:43 -04:00
Dan Halbert
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
Dan Halbert
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
Dan Halbert
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
Scott Shawcroft
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
Jeff Epler
5040e1b7a5
Merge pull request #6684 from jepler/espressif-camera-2
...
Rewrite camera support for the Espressif port
2022-08-09 18:50:25 -05:00
Scott Shawcroft
db837e2b48
Merge pull request #6725 from dhalbert/esp-stack-size-16kB
...
increase main task stack size from 8kB to 16kB
2022-08-09 16:40:16 -07:00
Scott Shawcroft
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
Scott Shawcroft
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
Dan Halbert
c4db71d12e
Merge pull request #6721 from dhalbert/i2c-target
...
Change I2C terminology from "peripheral" to "target"
2022-08-09 16:12:17 -04:00
Dan Halbert
4021b44a39
increase main task stack size from 8kB to 16kB
2022-08-09 15:00:01 -04:00
Scott Shawcroft
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
Scott Shawcroft
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
Scott Shawcroft
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
Jeff Epler
c74746f052
Cross references in documentation always help
2022-08-09 12:20:02 -05:00
Dan Halbert
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
Jeff Epler
5a85b8ab95
improve docstrings based on my best sleuthing
2022-08-09 11:42:19 -05:00
Jeff Epler
ec839d6f90
these items should not have been disabled
2022-08-09 11:42:19 -05:00
Jeff Epler
f87e34b9ed
add shutter button
2022-08-09 11:42:19 -05:00
Dan Halbert
10275001ac
enable web workflow on Feather HUZZAH32
2022-08-09 07:26:18 -04:00
paul
15ad24ba62
ran pre-commit.
2022-08-09 04:32:21 -04:00
lady ada
2cd9222e5e
add includes
2022-08-07 14:32:29 -04:00
lady ada
029b6b6fbe
add default display
2022-08-07 14:12:40 -04:00
paul
a6eadd6259
Added Bee Motion S3 board
2022-08-07 11:59:43 -04:00
paul
f39058edc4
Added Bee S3 board
2022-08-06 22:22:20 -04:00
Jeff Epler
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 16:38:51 -05:00
Dan Halbert
8c10e09ba0
Merge pull request #6667 from jepler/esp-reserve-heap-for-idf
...
Add ability to reserve psram
2022-08-05 15:06:44 -04:00
Jeff Epler
3f49d77036
Improve esp32-s3-eye board definition
2022-08-05 13:10:21 -05:00
Scott Shawcroft
125b276af0
Get CIRCUITPY FATFS directly.
...
Otherwise, you may actually get a non-root filesystem.
Fixes #6575
2022-08-04 16:06:27 -07:00
Jeff Epler
861fa9625d
Add the ESP32-EYE aka ESP-EYE
2022-08-04 15:12:12 -05:00
Jeff Epler
98202c8568
Allow changing camera settings that require reinit
...
These can only be changed in a group, though any items to keep
unchanged can be unspecified or specified as None.
2022-08-04 15:12:11 -05:00
Jeff Epler
428fbcd343
remove debug message during build
2022-08-04 15:12:10 -05:00
Jeff Epler
0e26a937cc
Disable camera everywhere it doesn't fit
2022-08-04 15:12:08 -05:00
Jeff Epler
230532f0eb
one last doc build fix
2022-08-04 15:12:07 -05:00
Jeff Epler
a9d53ad2a6
Fix "check-stubs" problems
2022-08-04 15:12:06 -05:00
Jeff Epler
7cb40c9054
further doc build fixes
2022-08-04 15:12:05 -05:00
Jeff Epler
81fb9a5f20
specify return type for docs
2022-08-04 15:12:04 -05:00
Jeff Epler
8bdbe0355a
Add more getters
2022-08-04 15:12:02 -05:00
Jeff Epler
badcae5ace
Fix docstring errors
2022-08-04 15:12:01 -05:00
Jeff Epler
aead0dfe45
Return a Bitmap from take() when appropriate
2022-08-04 15:12:00 -05:00
Jeff Epler
54fe753602
Enable gifio and qrio when appropriate
2022-08-04 15:11:59 -05:00
Jeff Epler
258f72640a
Implement a pile of getters & setters
2022-08-04 15:11:57 -05:00
Jeff Epler
69949ecb43
update PID for this board
2022-08-04 15:11:56 -05:00
Jeff Epler
d1b89fca91
Reset camera when interpreter is reset
2022-08-04 15:11:55 -05:00
Jeff Epler
f54c7adddc
Must treat NO_PIN cast to uint8_t the same as NO_PIN
...
Otherwise, deinitializing a camera with e.g., the powerdown
pin unspecified results in an assertion failure in a debug build.
2022-08-04 15:11:54 -05:00
Jeff Epler
1d1e139379
fix taking multiple pictures
2022-08-04 15:11:53 -05:00
Jeff Epler
b903a020fd
Enable display on esp32-s3-eye
2022-08-04 15:11:52 -05:00
Jeff Epler
8d673bdbf5
reserve 1MB of PSRAM for camera framebuffer on esp32s3-eye
...
.. this setting can be overridden with a bigger or smaller value in
CIRCUITPY/.env but 1/8 of PSRAM seems like a good initial value. It's
enough to store a single 800x600 or 640x480 RGB565 frame, or multiple
smaller frames such as 320x240.
2022-08-04 15:11:51 -05:00
Jeff Epler
5db6db0128
add esp32-camera
...
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 15:11:50 -05:00
Jeff Epler
8e08cc38f8
Add default I2C bus to Kaluga
2022-08-04 15:11:48 -05:00
Scott Shawcroft
e0cb8ef17e
Merge pull request #6694 from dhalbert/esp32-no-psram
...
ESP32 no psram support; other ESP32 cleanup
2022-08-04 11:49:39 -07:00
Scott Shawcroft
3707b54e3b
Merge pull request #6672 from bill88t/main
...
Add Waveshare ESP32-S2-Pico
2022-08-04 11:09:59 -07:00
Dan Halbert
202fac59f8
ESP32 fixes for no PSRAM; some cleanup
2022-08-04 13:44:52 -04:00
Dan Halbert
d4e8c19b49
merge from main
2022-08-04 12:43:23 -04:00
Jeff Epler
82be75adb5
Add ability to reserve psram
...
.. the primary user of which will be the camera, since the framebuffers
must be allocated via esp-idf allocation function and never from the
gc heap.
A board can have a default value, and the value can also be set in the
/.env file using the key CIRCUITPY_RESERVED_PSRAM with the value being
the reserved size in bytes.
Co-authored-by: Dan Halbert <halbert@adafruit.com>
2022-08-03 16:19:40 -05:00
bill88t
68bb6b9988
ran precommit
2022-08-03 09:14:26 +03:00
Bill Sideris
efa3e40f90
Add the one obtained from esp
2022-08-03 08:48:28 +03:00
Dan Halbert
d3d5e36548
update adafruit/esp-idf for ESP32_ECO3_CACHE_LOCK_FIX fix
2022-08-02 22:37:06 -04:00
Dan Halbert
b027d111a9
remove custom console UART from sdkconfig-esp32.defaults
2022-08-02 22:00:59 -04:00
Dan Halbert
534a482d94
initial HUZZAH32 bring-up, with hacked pins
2022-08-02 21:47:46 -04:00
Dan Halbert
767234e79c
Merge pull request #6688 from tannewt/fix_esp32c3_paste
...
Fix C3 when pasting 128+ characters
2022-08-02 21:35:02 -04:00
Dan Halbert
524cc5e274
Merge pull request #6685 from tannewt/esp32_ww
...
Enable Web Workflow on Feather ESP32 V2
2022-08-02 21:30:23 -04:00
Scott Shawcroft
9de8ae70b6
Fix C3 when pasting 128+ characters
...
The ringbuf used to fill up and the recv interrupt would block CP.
Now it'll disable the interrupt until we have enough room in the
ringbuf.
Fixes #6678
2022-08-02 15:25:19 -07:00
Scott Shawcroft
1c69fe1727
Fix S2/S3 USB
...
The new Kconfig that fixed C3 added a dependency on USB_OTG_SUPPORTED
that is only calculated if we include the usb module in cmake.
Fixes #6679
2022-08-02 14:11:09 -07:00
Scott Shawcroft
74e841d835
Read fuses to know what flash and ram pins to never reset
2022-08-02 12:01:42 -07:00
Bill Sideris
60429f51c7
Add official vid/pid
2022-08-02 09:43:17 +03:00
Scott Shawcroft
f0c6a8c49a
Odroid pin defs
2022-08-01 15:52:08 -07:00
Scott Shawcroft
9661d3256c
Add more ESP32 boards and enable web workflow
2022-08-01 15:52:08 -07:00
bill88t
c71cc4e0dd
Add Waveshare ESP32-S2-Pico
2022-07-30 15:35:48 +03:00
Scott Shawcroft
312e298890
Fix other ESP builds and arduino_nano_33_iot
2022-07-29 11:02:35 -07:00
Scott Shawcroft
d6344812e8
Lots of web workflow, C3 and title bar fixes
...
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548 .
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
Dan Halbert
3817d007aa
clean up esp32 sdkconfigs
2022-07-28 17:52:27 -04:00
Scott Shawcroft
c4c15206e7
Merge pull request #6608 from tannewt/web_workflow_port
...
Allow for dynamic reconfigure including port
2022-07-28 12:59:31 -07:00
Dan Halbert
282f8c49a6
Merge pull request #6660 from tannewt/fix_c3_serial_tx
...
Improve USB to Serial/JTAG TX
2022-07-28 14:42:56 -04:00
Scott Shawcroft
c29fa9012d
Merge pull request #6645 from prplz/seeed_xiao_esp32c3
...
Add board: seeed_xiao_esp32c3
2022-07-28 11:22:43 -07:00
Scott Shawcroft
ddeb833a3a
Shrink Feather S3 4mb build with -Os
2022-07-28 07:43:39 -07:00
Michael Himing
555bf7cc12
Add board: seeed_xiao_esp32c3
2022-07-28 22:48:03 +10:00
Scott Shawcroft
bea955222a
Improve USB to Serial/JTAG TX
...
It had a tight 5ms timeout before that caused some characters to
drop. Now the wait is longer and reset after a successful transmit.
This follows what MicroPython does.
Fixes #6220
2022-07-27 12:15:13 -07:00
Scott Shawcroft
ce60beeb25
Merge pull request #6651 from tannewt/refine_select_task
...
Improve web workflow responsiveness
2022-07-27 11:24:51 -07:00
Chris Dailey
2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag.
2022-07-27 08:38:52 -04:00
Scott Shawcroft
931757f4a9
Improve web workflow responsiveness
...
1. Run the socket select task at the same priority as CP. This is
needed because it queues up the background work. Without it, CP
needed to sleep to let the lower priority task go.
2. Close the active socket on disconnect. This prevents looping
over a disconnected but not closed socket.
Fixes #6610 . Fixes #6613
2022-07-26 15:29:49 -07:00
Neradoc
87e8994c4a
no default extension for ESP, fix duplicate line in rp2
2022-07-26 18:15:59 +02:00
Neradoc
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
Neradoc
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
Scott Shawcroft
66d5fa9a55
Save space on Feather S3 4mb with -Os
2022-07-25 16:19:52 -07:00
Scott Shawcroft
6d6234443d
Merge remote-tracking branch 'adafruit/main' into web_workflow_port
2022-07-25 15:57:58 -07:00
Scott Shawcroft
47f718aa92
Merge pull request #6615 from askpatrickw/beetle-esp32-c3
...
Beetle esp32 c3
2022-07-25 15:00:05 -07:00
Dan Halbert
f2bbe5a6a1
Merge pull request #6614 from litui/litui-espressif-bleiofix
...
Fixed empty characteristic issue with bleio+nimble.
2022-07-20 08:42:31 -04:00
Dan Halbert
e877644012
use -Os on Feather ESP32-S3 TFT to shrink build
2022-07-19 17:45:29 -04:00
Patrick
1e99d68af7
Add Creator ID
2022-07-17 12:38:27 -07:00
Patrick
71c22232f0
board config compelted
2022-07-17 11:48:45 -07:00
Aria Burrell
868a03ff57
Fixed empty characteristic issue with bleio+nimble.
...
- Based on espressif/nimble's blecent example code. Confirms that the characteristic is not empty before trying to catalogue its descriptors.
- Running ble_gattc_disc_all_dscs on empty (no length) characteristics fails with the (not-very-informative) BLE_HS_EINVAL error if this check is not performed.
2022-07-17 04:50:50 -06:00
Scott Shawcroft
78b4159448
Allow for dynamic reconfigure including port
2022-07-15 16:33:12 -07:00
Jeff Epler
4e6fa55cba
Merge pull request #6591 from tannewt/web_workflow_ticks
...
Add socket select task to wake CP
2022-07-15 18:30:43 -05:00
Scott Shawcroft
c2a8ef752c
Remove ps2io to make space
2022-07-15 14:01:50 -07:00
Scott Shawcroft
6e7fdcc24b
Add wait for MDNS hostname to be set
2022-07-15 13:48:19 -07:00
