djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,654 Commits 21 Branches 274 Tags 785 MiB
41cbe8045e
Commit Graph

148 Commits

Author SHA1 Message Date
Damien George
41cbe8045e stmhal/boards/STM32F769DISC: Fix user switch pin, and document stlink. 2017-03-30 17:59:36 +11:00
Damien George
c74fa7f58e stmhal/boards/STM32F769DISC: Get SD card working by using SDMMC2. 2017-03-30 17:58:45 +11:00
Damien George
9818c0db43 stmhal/boards: Update F76x alternate function table to add SDMMC2. 2017-03-30 17:57:18 +11:00
Damien George
43defc9e98 stmhal: Support SDMMC alternate functions in pin generation. 2017-03-30 17:52:20 +11:00
Damien George
9a1b3da158 stmhal/board: Fix existing and add more pin defs for NUCLEO_F767ZI. 2017-03-28 12:42:23 +11:00
Damien George
8b36664e17 stmhal/boards: Fix alt-func config for PA5 of STM32F767. 2017-03-28 12:41:55 +11:00
Johannes Wågen
f92f7dd2bc stmhal/boards: For STM32F411DISC, change I2C pin according to datasheet. 
The pin had to be changed to get the I2C sensors on board to work.
 2017-02-13 11:32:27 +11:00
Damien George
6b12934fec stmhal: Fix stack pointer initialisation for F411 and F429 boards. 
The stack pointer should start pointing 1 byte past the top of the end of
RAM.
 2017-01-30 17:47:11 +11:00
Damien George
f8a022bc11 stmhal/boards/STM32L476DISC: Use external SPI flash for filesystem. 2017-01-24 17:01:53 +11:00
Pavol Rusnak
bdcca42390 stmhal: Fix examples in openocd configs to include addresses. 2017-01-24 00:34:36 +11:00
sergiuszm
ea426dd9ef stmhal: Add support for STM32 Nucleo64 L476RG. 2016-12-22 17:45:50 +11:00
Damien George
e202b6f586 stmhal/sdcard: Use mp_hal_pin_config function instead of HAL_GPIO_Init. 
There is a minor functional change with this patch, that the GPIO are now
configured in fast mode, whereas they were in high speed mode before.  But
the SDIO should still work because SD CK frequency is at most 25MHz.
 2016-12-22 14:55:26 +11:00
Damien George
0f408bc1ff stmhal: Move PY_SYS_PLATFORM config from board to general config file. 
It can be overridden by a board if needed.
 2016-12-13 16:26:45 +11:00
Rami Ali
8001918a89 stmhal: Add STM32F769DISC board files. 
With minor changes to adc.c and storage.c to support the F769.
 2016-12-13 16:26:13 +11:00
Rami Ali
e9fbc555fc stmhal: Add NUCLEO_F767ZI board, with openocd config for stm32f7. 2016-12-13 16:25:31 +11:00
Rami Ali
db5a4e8f3c stmhal/boards/STM32F7DISC: Define LSE_STARTUP_TIMEOUT. 
So it compiles with the latest F7 hal.
 2016-12-07 17:31:21 +11:00
Rami Ali
27a503f632 stmhal: Refactor UART configuration to use pin objects. 
This follows the pattern of other peripherals (I2C, SPI) to specify the
pins using pin objects instead of a pair of GPIO port and pin number.  It
makes it easier to customise the UART pins for a particular board.
 2016-12-05 14:26:41 +11:00
Nicholas Graumann
0d75b0d962 stmhal: Add address parameters to openocd config files. 
Also make l4 config the default for STM32L476DISC board.
 2016-11-28 15:27:36 +11:00
Nicholas Graumann
50a2966913 stmhal: Add OpenOCD configuration for STM32L4. 2016-11-28 15:27:36 +11:00
Krzysztof Blazewicz
7928b3e347 stmhal/boards: configure all F4 boards to work with new HAL 
changes include:
* use single GPIO.BSRR instead of BSRRH and BSRRL
* change HSE_STARTUP_TIMEOUT to 100 ms
* define LSE_STARTUP_TIMEOUT to 5 s
 2016-11-16 12:43:27 +01:00
Damien George
7bb0f7b0f6 drivers: Add "from micropython import const" when const is used. 
Following best-practice use of the const feature, to make it compatible
with Python.
 2016-11-03 12:41:11 +11:00
Damien George
b4cc68e4a4 stmhal/led: Refactor LED to use mp_hal_pin_output() init function. 
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
 2016-10-18 14:43:05 +11:00
Dave Hylands
c08f50bcf7 stmhal: Disable network and usocket for ESPRUINO_PICO 2016-10-06 11:47:45 +11:00
Dave Hylands
7a9c183c20 stmhal: Fix ESPRUINO_PICO by adding ld scripts with correct flash size. 2016-10-05 11:42:50 +11:00
Dave Hylands
1f433c719b stmhal: Fix linker map for STM32L476 chips. 
In particular, this makes the L4 .isr_vector section 16K in size so it's
the same as the F4/F7 MCUs.  The patch also moves the L4 filesystem to
the end of flash, which allows for 512K filesystem on the 1Mb devices
like the STM32L476DISC.
 2016-10-04 14:31:19 +11:00
Nicholas Graumann
7165fbd8f4 stmhal: Add virtual com port support for STM32L476DISC. 2016-09-27 22:08:55 -05:00
Krzysztof Blazewicz
9310dad15d stmhal: Put common definitions from linker files to common.ld. 2016-09-22 12:03:12 +10:00
Damien George
4874bde104 stmhal/boards: For OLIMEX_E407, enable UART1 and fix I2C1 mapping. 
UART1 can be used even if the switch is enabled.  The schematics for this
board make I2C1 available on PB8/PB9, even though it can also be mapped
to PB6/PB7.

See #2396 and #2427.
 2016-09-19 13:00:15 +10:00
Damien George
0fd3d8d19f stmhal/boards: Add pllvalues.py script to compute PLL values for sysclk. 
The algorithm here should mirror that in the machine.freq() function.
 2016-09-14 13:00:27 +10:00
Dave Hylands
fedab995ee stmhal: Set STM32F7DISC CPU Frequency to 216 MHz 
This set the CPU frequency to 216 MHz (the max) and
leaves the USB Frequency at 48 MHz.

These settings were copied from one of the HAL examples.
 2016-09-04 18:14:41 +10:00
Matt Brejza
5af6184e72 stmhal: Make ADC channel 16 available on L4 MCUs. 2016-08-25 13:49:51 +10:00
Damien George
dfb8144037 stmhal/boards: Update STM32L476 pin defs to include ADC channels. 
This patch introduces proper ADC Pin definitions in stm32l476_af.csv.
Originally provided by @tobbad.
 2016-08-11 13:01:57 +10:00
David Siorpaes
b67eb20ed0 stmhal: Fix I2C mappings for STM32F429DISC board. 2016-08-04 22:51:53 +10:00
Stefan Hölzl
c8332a5463 stmhal: Add board definition files for Olimex STM32-E407. 2016-06-06 10:21:02 +01:00
Damien George
1dc2862a83 stmhal/led: Allow LEDs to be in PWM mode with TIM1 and channels 1-4. 
This allows PYBv3 to use PWM for LED(1) and LED(2).
 2016-05-13 11:01:21 +01:00
Tobias Badertscher
b924f649cd stmhal: Fix clock configuration for STM32L476-discovery; also add I2C2. 2016-05-10 09:20:30 +01:00
Damien George
08d3d5d9ab stmhal: For LIMIFROG board, add early-init function to get to DFU mode. 2016-05-05 17:00:30 +01:00
Tobias Badertscher
770f169e63 stmhal: Add board files for LIMIFROG board. 2016-05-05 17:00:16 +01:00
Tobias Badertscher
0b6e28c999 stmhal: L4: Add board definition files for STM32L476DISC. 2016-04-16 22:11:02 +01:00
Dave Hylands
99fc0d120a stmhal: NUCELO_F401RE cleanup 
Added definitions for SPI1, SPI2, and SPI3
Removed USB stuff (that could be removed)
Updated BOARD name defintion
 2016-03-13 12:36:39 +00:00
Dave Hylands
00f921ce02 stmhal: Rename STM32F401NUCLEO to NUCLEO_F401RE 
This makes the board match the name printed on the board (and
agree with the documentation)
 2016-03-13 12:36:39 +00:00
Dave Hylands
031fadd10e stmhal: Add board definition files for NUCLEO_F411RE 2016-03-12 16:16:15 -08:00
Christopher Arndt
9b5e05a7c7 stmhal: Add makefile target and configuration to deploy via OpenOCD. 2016-03-09 23:00:17 +00:00
Ryan Shaw
ad725a6661 stmhal: Add support for generic STM32F439 board (non DISCO). 2016-03-09 22:46:41 +00:00
Dave Hylands
484a471f9b stmhal: Fix some typos in stm32f411 files, regarding FS layout and CSV. 2016-03-07 12:42:30 +00:00
Dave Hylands
367c084c4b stmhal: Fix typo in stm32f401.ld file, regarding flash size. 2016-03-07 12:38:57 +00:00
Pavol Rusnak
ce3beb1672 stmhal: Unify comments in stm32f4xx_hal_conf.h across all boards. 
To make it easier to spot differences.
 2016-03-07 11:28:36 +00:00
Dave Hylands
ec37239e53 stmhal: Improvements to the STM32F4DISC UART config settings. 2016-02-15 10:11:29 +00:00
Dave Hylands
4b2938a4b0 stmhal: Some NETDUINO_PLUS_2 cleanup 
- Put the I2C bus on the corect pins
- Add the appropriate board_init to power the shield
 2016-02-15 10:07:27 +00:00
Dave Hylands
32b7e93535 stmhal: NUCLEO 401 - Add definitions for I2C2 and I2C3 2016-02-10 21:26:14 -08:00