4a33677c97
esp8266/esp8266.ld: Move modmachinewdt to FlashROM.
2016-09-03 20:44:24 +03:00
3be8b688c0
esp8266/modpybhspi: Simplify HSPI driver by using 1 function for xfers.
2016-09-01 16:40:12 +10:00
5863e15a23
esp8266/modpybspi: Use generic SPI helper methods to implement SPI.
2016-09-01 16:39:42 +10:00
9c04ef2a67
unix,stmhal,esp8266: When find'ing frozen files don't use extra slash.
...
This extra forward slash for the starting-point directory is unnecessary
and leads to additional slashes on Max OS X which mean that the frozen
files cannot be imported.
Fixes #2374 .
2016-08-31 15:12:57 +10:00
59a9509703
esp8266/modules/ds18x20.py: Add support for DS18S20 devices.
2016-08-29 12:45:07 +10:00
8e9b98e974
esp8266/modules/onewire: Change onewire.read() to onewire.readinto().
...
This allows 1-wire drivers (eg DS18X20) to perform in-place operations and
hence do less memory allocations.
2016-08-29 12:27:21 +10:00
9fba618356
esp8266/modules: Split onewire.py into OneWire and DS18X20 driver.
...
The OneWire class is now in its own onewire.py module, and the temperature
sensor class is in its own ds18x20.py module. The latter is renamed to
DS18X20 to reflect the fact that it will support both the "S" and "B"
variants of the device.
These files are moved to the modules/ subdirectory to take advantage of
frozen bytecode.
2016-08-29 12:12:49 +10:00
263aaa7030
esp8266/modmachinewdt: Implement machine.WDT class.
2016-08-28 14:48:49 +03:00
d29ca28288
esp8266/modous: Add os.umount method to unmount a filesystem.
...
This is an object-oriented approach, where uos is only a proxy for the
methods on the vfs object. Some internals had to be exposed (the STATIC
keyword removed) for this to work.
Fixes #2338 .
2016-08-26 12:45:21 +10:00
891479e62a
esp8266/hspi: Enable duplex operation of hardware SPI
...
Without this, spi.read(1, 0xff) would use 16 clock cycles,
first to send 0xff and then to receive one byte, as visible
with a logic analyzer.
2016-08-25 21:24:22 +03:00
d09b6b9aa1
esp8266/modpybrtc: Use 64-bit arithmetic when computing alarm expiry.
2016-08-25 14:10:25 +10:00
f2a21a2489
esp8266/esp_mphal: No longer disable watchdog on startup.
...
Disabling it was an omission from early development stages.
2016-08-20 16:33:04 +03:00
d076fae219
esp8266/modmachinespi: Add a factory method for SoftSPI/HSPI
2016-08-19 21:19:59 +03:00
8e7dfea803
esp8266/modpybhspi: Add a HSPI module for hardware SPI support
...
This module uses ESP8266's SPI hardware, which allows much higher
speeds. It uses a library from
https://github.com/MetalPhreak/ESP8266_SPI_Driver
2016-08-19 21:19:59 +03:00
675d1c9c60
ports: Remove typedef of machine_ptr_t, it's no longer needed.
...
This type was used only for the typedef of mp_obj_t, which is now defined
by the object representation. So we can now remove this unused typedef,
to simplify the mpconfigport.h file.
2016-08-15 11:02:59 +10:00
9cf2949356
esp8266/mpconfigport.h: Enable support for all special methods.
2016-08-14 01:02:35 +03:00
8a15e0b1c7
esp8266: PULL_UP is not supported on Pin(16), so raise an exception.
2016-08-10 12:45:40 +10:00
b203c1774e
esp8266: Fix reading of pin object for GPIO16.
...
Pin(16) now works as an input.
2016-08-10 12:44:47 +10:00
3c9510d767
esp8266/modules/flashbdev: Start filesystem at 0x90000.
...
To accommodate growing firmware.
2016-08-09 14:59:27 +03:00
3372f69586
esp8266/esp8266.ld: Increase firmware image size to 0x90000 (576K).
...
Of them, 0x87000 is irom0 segment.
This is required to ship increasing number of modules and examples
developed in teh course of ESP8266 port project.
2016-08-09 14:54:26 +03:00
31ad1bb606
esp8266/modmachine: Implement dummy sleep() function.
2016-08-07 16:20:01 +03:00
541e76fa45
esp8266/modutime: Actually implement ticks_cpu().
2016-08-07 16:13:51 +03:00
f71f37e426
esp8266/esp_mphal.h: Add mp_hal_ticks_cpu() for reuse.
2016-08-07 16:03:00 +03:00
c2070d771a
esp8266/modmachine: Implement idle() function.
2016-08-07 15:51:04 +03:00
6de37864a2
esp8266/scripts/inisetup: Add commented-out call to esp.osdebug(None).
...
That apparently will only help folks who read the docs on how to disable,
but could use a quick reminder straight in boot.py. For the developers,
it's important to have debug logging enabled in development branch
(master).
2016-08-06 15:27:38 +03:00
ca59f5f208
esp8266/flashbdev: Reserve extra sysparam sector for SDK 2.0.0 compatibility.
2016-08-06 15:21:49 +03:00
4a27ad040e
esp8266/scripts/port_diag.py: Include esp.check_fw() call.
2016-08-04 00:43:58 +03:00
e33d2383d1
esp8266/modesp: Add check_fw() function to check integrity of the firmware.
...
Requires firmware generated by the latest makeimg.py (which stores size
and md5 of the firmware together with the firmware itself).
2016-08-04 00:29:19 +03:00
bf47b71b78
esp8266/makeimg.py: Append md5 hash to the generated binary.
...
md5 is calculated over the entire file, except first 4 bytes, which contain
flash parameters and may be changed by flashing tool or MicroPython flash
auto-config.
2016-08-04 00:21:05 +03:00
a621333a4c
esp8266/makeimg.py: Store firmware size as last 4 bytes of padding area.
2016-08-04 00:19:09 +03:00
0e4cae5212
esp8266: Make APA102 driver inclusion configurable.
2016-08-01 00:03:55 +03:00
88d3cd582e
esp8266/eagle.rom.addr.v6.ld: Add Enable_QMode symbol from SDK 2.0.0.
2016-08-01 00:01:49 +03:00
4d22ade102
esp8266: Enable btree module.
2016-07-31 02:39:59 +03:00
64ad838fde
esp8266/esp_mphal: Implement libc's errno.
...
Using __errno() function, and redirect it to use mp_stream_errno from
stream module. This is pre-requisite for integrating with 3rd-party libs,
like BerkeleyDB.
2016-07-31 02:30:05 +03:00
61e77a4e88
py/mpconfig.h: Add MICROPY_STREAMS_POSIX_API setting.
...
To filter out even prototypes of mp_stream_posix_*() functions, which
require POSIX types like ssize_t & off_t, which may be not available in
some ports.
2016-07-30 20:05:56 +03:00
ba2c503541
esp8266/mpconfigport.h: Include sys/types.h for POSIX types definitions.
...
As required for related functions in stream.h.
2016-07-30 17:46:36 +03:00
50fea19416
esp8266/axtls_helpers: Remove abort_(), now in lib/embed/.
2016-07-30 00:36:28 +03:00
aa4ada943a
esp8266/modpybuart: Fix UART parity setting.
...
The configuration bits for the UART register were wrong and the parity
couldn't be enabled, because the exist_parity member hasn't been updated. I
took this ESP8266 register description (http://esp8266.ru/esp8266-uart-reg/ )
as reference.
Verification has been done with a logic analyzer.
2016-07-27 21:05:45 +03:00
0d221775f5
esp8266/_boot.py: Decrease GC alloc threshold to quarter of heap size.
...
The idea behind decrease is: bytecode and other static data is also kept on
heap, and can easily become half of heap, then setting threshold to half of
heap will have null effect - GC will happen on complete heap exhaustion like
before. But exactly in such config maintaining heap defragmented is very
important, so lower threshold to accommodate that.
2016-07-23 13:56:24 +03:00
c141584e1e
esp8266/_boot.py: Set GC alloc threshold to half of heap size.
...
Should keep good chunk of heap unfragmented, if a user application allows
that at all.
2016-07-23 00:20:49 +03:00
77f0cd8027
esp8266: dupterm_task_init() should be called before running _boot.py, etc.
...
Because they may use dupterm functionality (e.g. WebREPL running on boot).
2016-07-23 00:05:38 +03:00
40214b9e26
esp8266: Enable MICROPY_PY_STR_BYTES_CMP_WARN.
2016-07-22 00:57:55 +03:00
6aa7c805cc
esp8266: Cache Xtensa-built libaxtls.a in local build dir.
...
Allows to build the library variant for other archs in parallel.
2016-07-16 04:56:23 +03:00
bcd0e9a7fa
esp8266/moduos: Add rmdir() function.
2016-07-16 03:53:55 +03:00
be313ea215
esp8266: Select axTLS for SSL implementation, following recent refactor.
2016-07-13 01:59:41 +03:00
380561836d
esp8266/esp_mphal: Properly handle dupterm EOF after switching to readinto().
2016-07-05 14:18:12 +03:00
a22b6ebff1
esp8266/esp_mphal: call_dupterm_read: Use readinto() method.
...
It's memory fragmentation hazard to allocate 1-char string each time by
calling read() method.
2016-07-04 21:34:40 +03:00
e07ef8f1a2
esp8266/main: Init recently added dupterm_arr_obj port state var.
2016-07-04 17:40:26 +03:00
4cfe3e84b0
esp8266/README: Promote from "highly experimental" to "experimental".
2016-07-02 23:14:22 +03:00
b8f45166c6
esp8266: Switch webrepl to use frozen bytecode.
2016-07-02 22:45:31 +03:00
dec51e3519
esp8266: Switch webrepl_setup to use frozen bytecode.
2016-07-02 22:40:16 +03:00
686367dcfc
esp8266: Explicitly collect garbage in bootstrap scripts.
...
Leads to less fragmentation at teh time user code starts.
2016-07-02 19:22:55 +03:00
35962eaab0
esp8266/modpybuart: allow setting baudrate and other params
2016-06-30 18:18:50 +02:00
d1b7ba5dc1
esp8266/websocket_helper.py: Fix typo in debug output.
2016-06-30 13:34:58 +03:00
6907496016
esp8266/websocket_helper.py: Avoid extra string allocations.
2016-06-30 00:02:45 +03:00
56845b6aff
esp8266/README: Describe how to build mpy-cross.
2016-06-29 14:25:12 +01:00
db80c0ed46
esp8266: Enable frozen bytecode, with scripts in modules/ subdir.
...
To start with, the critical scripts _boot.py and flashbdev.py are frozen
to improve performance and reduce RAM consumption.
Saves about 1000 bytes of heap RAM for a bare boot with filesystem.
2016-06-29 13:59:19 +01:00
eb7637ba2e
esp8266/main.c: Clear the command line history when (re)booting.
...
Not clearing the command line history sometimes results in strange output
when going back after a reset.
2016-06-26 12:48:19 +01:00
07209f8592
all: Rename mp_obj_type_t::stream_p to protocol.
...
It's now used for more than just stream protocol (e.g. pin protocol), so
don't use false names.
2016-06-18 18:44:57 +03:00
23067a1422
esp8266: Use RTC to set date & time stamps for files.
...
The time stamp is taken from the RTC for all newly generated
or changed files. RTC must be maintained separately.
The dummy time stamp of Jan 1, 2000 is set in vfs.stat() for the
root directory, avoiding invalid time values.
2016-06-16 19:31:58 +03:00
236838a9fc
esp8266/Makefile: Enable --verify option for esptool.py write_flash.
...
Based on my experience, there's rather non-zero chance to have an image be
flashed incorrectly. As --verify option is now works well in teh latest
esptool.py, enable it by default.
2016-06-12 18:50:24 +03:00
9f8b788fe5
esp8266: Switch floating-point arith routines to BootROM.
2016-06-12 18:44:14 +03:00
ee12581a35
esp8266: Let RTC work correctly after deepsleep.
...
By design, at wake up from deepsleep, the RTC timer will be reset, but
the data stored in RTC memory will not [1]. Therefore, we have to adjust
delta in RTC memory before going into deepsleep to get almost correct
time after waking up.
[1] http://bbs.espressif.com/viewtopic.php?t=1184#p4082
2016-06-06 10:51:12 +01:00
822e9ca8f3
esp8266/modnetwork: Use struct bss_info::ssid_len for ESSID length.
...
Instead of calling strlen(), which won't work if there're 32 chars in
returned ESSID. struct bss_info::ssid_len is not documented in SDK API
Guide, but is present in SDK headers since 1.4.0. Just in case, previous
code is left commented.
2016-06-04 22:02:01 +03:00
cafdfb7af3
esp8266/modpybrtc: Handle RTC overflow.
...
ESP-SDK system_get_rtc_time() returns uint32 and therefore overflow
about every 7:45h. Let's write the last state of system_get_rtc_time()
in RTC mem and use it to check for overflow. This commit require running
pyb_rtc_get_us_since_2000() at least once within 7 hours to avoid
overflow.
2016-06-03 14:37:49 +01:00
927388e80e
esp8266: Provide a dedicated variable to disable ets_loop_iter.
...
So ets_loop_iter is now only disabled when using machine.disable_irq.
2016-06-01 17:26:49 +01:00
752e952096
esp8266/rtc: Set RTC user memory length to 0 on first boot.
...
So that RTC.memory() returns b'' on power up if it was never set.
Fixes issue #2138 .
2016-06-01 11:33:04 +01:00
4f3fbf09cc
esp8266/moduos.c: Add stat() to the module uos of esp8266.
...
This implementation makes use of vfs.stat() and therefore has the same
properties. Known issues for all ports: uos.stat(".") on the top level
returns the error code 22, EINVAL. The same happens with
uos.stat("dirname/") where dirname IS the name of a directory.
2016-05-31 23:00:38 +03:00
15eb1ce52d
esp8266: Enable MICROPY_PY_IO_FILEIO to get compliant text/binary streams.
2016-05-31 21:46:02 +03:00
33168081f4
extmod/machine: Add MICROPY_PY_MACHINE_PULSE config for time_pulse_us.
...
Since not all ports that enable the machine module have the pin HAL
functions.
2016-05-31 14:25:19 +01:00
cff2b7a6e3
esp8266/modmachine: Add machine.time_pulse_us function.
2016-05-31 14:06:50 +01:00
225562d915
esp8266/scripts/ntptime: Allow to override NTP server.
...
This is not part of public API, variable name may change, or it can be
replaced with a function.
2016-05-30 19:16:05 +03:00
12401f337e
esp8266/moduos: Add chdir() and getcwd() functions.
2016-05-29 19:44:24 +03:00
602305b211
esp8266/uart: Properly initialise UART0 RXD pin in uart_config.
...
Tested and seems to work. See #1995 .
2016-05-29 10:30:27 +01:00
6707fc94ae
esp8266/modnetwork: Allow to press ctrl-C while scan() is running.
...
Ctrl-C will raise a KeyboardInterrupt and stop the scan (although it will
continue to run in the background, it won't report anything). If
interrupted, and another scan() is started before the old one completes
in the background, then the second scan will fail with an OSError.
2016-05-29 09:53:04 +01:00
84381fa0fc
esp8266/modnetwork: Protect scan() callback against memory errors.
...
scan() allocates memory so may cause an exception to be raised.
2016-05-29 09:52:07 +01:00
55df14f1a4
esp8266/modnetwork: scan() is only supported by STA when it's enabled.
2016-05-29 00:35:24 +01:00
74e6c0337d
esp8266/Makefile: Document "disable" value for UART_OS.
2016-05-27 00:44:05 +03:00
7ebfe09fbd
esp8266: Add dht.py script for high-level control of DHT11/DHT22 sensor.
...
TODO: should go in a more port-neutral place, like drivers/dht, but at the
moment in relies on specific esp module.
2016-05-26 17:13:03 +01:00
45f3416816
esp8266: Enable DHT C-level driver.
...
Exposed as esp.dht_readinto. Probably should go somewhere less
port-specific.
2016-05-26 17:11:43 +01:00
4b37e775ea
extmod/machine_i2c: Redo mp_hal_pin macros to use open_drain and od_low.
...
mp_hal_pin_config_od is renamed mp_hal_pin_open_drain, and mp_hal_pin_low
is mp_hal_pin_od_low.
2016-05-26 17:06:40 +01:00
9a368ae831
esp8266/modmachine: Add disable_irq and enable_irq functions.
2016-05-26 15:47:47 +01:00
849eb835f0
esp8266/ets_alt_task: Don't run ets_loop_iter if irqs are disabled.
...
ets_loop_iter processes pending tasks, and tasks are considered lower
priority than interrupts, so tasks shouldn't be processed if interrupts
are disabled.
2016-05-26 15:47:47 +01:00
99b14593a6
esp8266/xtirq: Add xtirq.h for controlling xtensa irqs.
2016-05-26 15:47:47 +01:00
7e809b4baf
esp8266/modpybspi: Configure pins when initialising an SPI object.
2016-05-26 15:42:44 +01:00
68e222afdc
esp8266: Add mp_hal_pin_input() and mp_hal_pin_output() functions.
2016-05-26 15:42:27 +01:00
2b05b60bbc
esp8266/esp_mphal: mp_uos_dupterm_deactivate() may raise exception.
...
So, keep call to it protected via NLR still.
2016-05-24 15:04:59 +03:00
4681b86850
esp8266/esp_mphal: Handle Ctrl+C from dupterm (e.g. WebREPL).
2016-05-24 01:37:56 +03:00
116eeee6db
esp8266/esp_mphal: Fix NLR buffer leak in call_dupterm_read().
2016-05-24 01:30:28 +03:00
bc2ba6b2e3
esp8266/scripts/port_diag: Dump network interface IP settings.
2016-05-24 01:27:16 +03:00
cb7693bab4
esp8266/main: Update _boot module loading for recent frozen modules refactors.
2016-05-22 04:09:15 +03:00
9c2217a165
esp8266: Enable collections.OrderedDict.
2016-05-22 02:57:33 +03:00
0ab372585f
extmod/moduos_dupterm: Dumpterm subsystem is responsible for closing stream.
...
Make dupterm subsystem close a term stream object when EOF or error occurs.
There's no other party than dupterm itself in a better position to do this,
and this is required to properly reclaim stream resources, especially if
multiple dupterm sessions may be established (e.g. as networking
connections).
2016-05-20 22:20:37 +03:00
a0a08b4be1
esp8266: Add APA102 serial individually controllable LEDs support.
...
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
2016-05-19 22:29:11 +03:00
6fa60153ea
esp8266/README: Add a very first start section.
...
Adding a very first start section to get people going after flashing.
I tried to condense it to a minimum to avoid as much as possible
redundancy and bloating.
2016-05-19 21:10:35 +03:00
418faae8f7
esp8266/scripts/webrepl_setup: Add max password length check.
...
modwebrepl truncates password to 9 chars, and that led people to confusion.
2016-05-17 02:21:45 +03:00
21ec1fd850
esp8266/scripts/webrepl_setup: Show password placeholder char.
...
That was the intent for the initial user setup, but didn't work before
due to lwIP issues. Enable now that they're fixed.
2016-05-17 00:01:41 +03:00
7327d5f6f7
esp8266/scripts/port_diag: Add network diagnostic output.
2016-05-16 23:52:58 +03:00
a676a41cb7
esp8266/moduos.c: Addition of the rename method to module uos.
...
That one was missing in the module, even if it was available in the
vfs object. The change consist of adding the name and preparing the
call to the underlying vfs module, similar to what was already
implemented e.g. for remove.
Rename is useful by itself, or for instance for a safe file replace,
consisting of the sequence:
write to a temp file
delete the original file
rename the temp file to the original file's name
2016-05-16 13:19:13 +02:00
0d6d315ba6
esp8266: Change to use internal errno's.
2016-05-12 12:49:36 +01:00
7e1f580910
esp8266: Enable uerrno module, weak linked also as errno.
2016-05-10 23:30:39 +01:00
4f2ba9fbdc
esp8266: Convert to use new MP_Exxx errno symbols.
...
These symbols are still defined in terms of the system Exxx symbols, and
can be switched to internal numeric definitions at a later stage.
Note that extmod/modlwip still uses many system Exxx symbols.
2016-05-10 23:30:39 +01:00
d60cb8e180
esp8266/help: Add "sta_if.active(True)" command.
...
As reported on the forum by Roberthh.
2016-05-10 23:21:32 +03:00
f16bec6bc9
esp8266/mpconfigport: Reduce various parser-related allocation params.
...
This gives noticeable result for parsing simple input (modelled on 32-bit
unix port):
Before:
>>> micropython.mem_total()
3360
>>> micropython.mem_total()
4472
After:
>>> micropython.mem_total()
3072
>>> micropython.mem_total()
4052
However, effect on parsing large input is much less conclusive, e.g.:
Before:
>>> micropython.mem_total()
3376
>>> import pystone_lowmem
>>> micropython.mem_total()
33006
delta=29630
After:
>>> micropython.mem_total()
3091
>>> import pystone_lowmem
>>> micropython.mem_total()
32509
delta=29418
2016-05-10 15:38:31 +03:00
de5e0ed2e0
esp8266/main: Bump heap size to 28K.
...
This is kind of compensation for 4K FatFs buffer size which is eaten away
from it on FS mount. This should still leave enough of networking ("OS")
heap.
2016-05-09 19:02:40 +03:00
13a1acc7e2
esp8266/scripts/webrepl: Add start_foreground() method.
...
Starts WebREPL server in foreground and waits for (single) connection.
2016-05-08 20:01:15 +03:00
2724bd4a94
esp8266/scripts/webrepl: Add optional password argument to webrepl.start()
...
This commit fixes issue #2045
2016-05-07 22:45:08 +03:00
13d06a83e1
esp8266/scripts/: Add fill() to NeoPixel
2016-05-07 21:15:33 +03:00
8db61e5b5a
esp8266/scripts/inisetup: Don't start WebREPL on boot in master branch.
...
It interferes with running testsuite. master branch should be optimized for
development, so any features which interfere with that, would need to be
disabled by default.
2016-05-07 20:04:45 +03:00
df2b1a4758
esp8266/scripts/: Remove use of pin.PULL_NONE.
...
This constant is no longer part of hardware API (replaced with just None),
and is a default, so not needed in calls.
2016-05-05 23:47:37 +03:00
fb5017f9dc
esp8266/main: Set sys.path to ["", "/", "/lib"].
2016-05-03 18:25:27 +03:00
496a601c3b
esp8266: Shrink help text by a few lines, to fit in smaller windows.
2016-05-03 15:54:57 +01:00
f873a5005a
esp8266/scripts/ntptime: Add simple NTP client.
...
.time() returns seconds since MicroPython epoch (2000-01-01 00:00UTC),
.settime() sends current system time, assuming UTC timezone.
2016-05-03 16:47:42 +03:00
8e130fcf2b
esp8266/modpybpin: Make pin.irq() methods take keyword args.
2016-05-03 13:47:10 +01:00
8a3e9036eb
esp8266/modpybpin: Use None instead of PULL_NONE for no-pull config.
2016-05-03 13:13:56 +01:00
9df6b3a2c2
esp8266/modpybpin: Use enum+array instead of struct for parsing args.
2016-05-03 12:44:28 +01:00
b539a61490
esp8266/scripts/neopixel.py: Swap red and green in pixel accessor.
2016-05-03 11:17:37 +01:00
5e94f0b43a
esp8266/scripts/inisetup: Update for nic.mac() method being gone.
2016-05-03 02:16:42 +03:00
35e63f0007
esp8266/modnetwork: Remove .mac() method, move to .config("mac").
...
Querying/setting MAC address is pretty adhoc operation to belong to
.config() instead of taking a whole method on its own.
2016-05-03 01:02:14 +03:00
3944d3511f
esp8266/scripts/inisetup: Enable WebREPL auto-start on boot.
2016-05-03 00:38:47 +03:00
76c81cd5a6
esp8266/modesp: Add malloc() and free() functions.
...
Useful for testing fragmentation issues in OS heap. E.g. freemem() may
report large amount, but is it possible to actually allocate block of
a given size? Issue malloc() (followed by free()) to find out.
2016-05-03 00:35:11 +03:00
2123ced3f4
esp8266/modesp: Add esf_free_bufs() debugging function.
...
Return number of free inernal WiFi buffers.
2016-05-03 00:26:22 +03:00
3d830415bc
esp8266/esp_mphal: Add ets_esf_free_bufs(), etc. functions.
...
Returning free number of various WiFi driver packet buffers.
2016-05-03 00:18:14 +03:00
7b7c99fec1
esp8266/modnetwork: Remove deprecated wifi_mode().
...
Network interfaces are now controlled individually using .active() method.
2016-05-03 00:09:23 +03:00
9215cdc7fd
esp8266: Change platform name from ESP8266 to esp8266.
...
The port name is lowercase, and this change is made for consistency with
the docs and other ports.
2016-05-02 18:54:46 +01:00
13d9d50fea
esp8266/scripts/webrepl_setup: Reject too short passwords.
2016-05-02 18:48:32 +03:00
26fd0ac571
esp8266/Makefile: Be sure to pass cross-compiling AR when building axtls.
...
Fixes build under MacOSX.
2016-05-02 01:22:42 +03:00
9dd2c92d01
esp8266/README: Mention WebREPL.
2016-04-30 23:02:54 +03:00
c1d1c562f3
esp8266/scripts/webrepl: Add "first connection" mode to setup password.
...
If there's no port_config.py file, or it lacks WEBREPL_PASS variable,
"initial setup mode" will be entered on first WebREPLconnection. User
will be asked for password, which will be written to
port_config.WEBREPL_PASS, and system restarted to work in normal mode
with password active.
2016-04-30 20:41:09 +03:00
962d5a987f
esp8266/scripts/webrepl: Switch to using _webrepl object wrapper.
...
Handling of binary protocol is untested on esp8266 so far.
2016-04-30 20:39:35 +03:00
006ffe1561
esp8266/scripts/webrepl: Connection ack prompt is now printed by modwebrepl.
...
After password is checked.
2016-04-30 20:38:05 +03:00
6ddd9f3e2b
esp8266/scripts/inisetup: Create default boot.py in filesystem.
...
Currently it pre-imports webrepl, but doesn't start it.
2016-04-29 20:11:48 +03:00
74f413bc60
esp8266/scripts/_boot: builtins is no longer used.
2016-04-29 20:04:17 +03:00
d86d65f625
esp8266/scripts: Move all of initial setup to inisetup module.
2016-04-29 20:02:59 +03:00
adae53d522
esp8266: Enable webrepl module.
2016-04-29 19:38:21 +03:00
f8170db390
esp8266: Enable WebREPL file transfer rate limiting.
2016-04-29 19:15:26 +03:00
22050a3ed0
esp8266/help: Add cheatsheet for basic WiFi configuration.
2016-04-29 00:34:08 +03:00
b639ce27c7
esp8266/help: Implement help() builtin.
2016-04-29 00:17:11 +03:00
af554b4ba2
esp8266/modnetwork: Make WLAN.ifconfig() read/write.
...
Allow setting ip, netmask, gw and dns server (also, allows getting dns).
For docs see: https://github.com/micropython/micropython/commit/06deec9
2016-04-28 23:51:04 +03:00
193c62226c
esp8266/README: Add recently required step of 'make axtls'.
2016-04-28 21:42:04 +03:00
978a429aaa
esp8266: Set suitable values for axtls's RT_MAX_PLAIN_LENGTH & RT_EXTRA.
2016-04-28 17:45:22 +03:00
8c3b5526ae
esp8266/scripts/neopixel.py: Remove test function from neopixel driver.
...
It takes up lots of room and isn't needed.
2016-04-28 13:37:17 +01:00
1f7cec944e
esp8266/scripts/onewire.py: Simplify and improve 1-wire driver.
...
Changes are:
- added OneWireError exception and used where errors can occur
- renamed read/write functions to use same names as C _onewire funcs
- read_bytes is now read, write_bytes is now write
- add ability to read/write DS18B20 scratch pad
- rename start_measure to convert_temp (since that's what it does)
- rename get_temp to read_temp (consistency with other read names)
- removed test function
2016-04-28 13:33:55 +01:00
38358a096d
esp8266: Move onewire.py, neopixel.py drivers from tests/ to scripts/.
2016-04-28 12:36:45 +01:00
a6aa35af09
esp8266: Move pyb.info() function to esp module and remove pyb module.
...
All functionality of the pyb module is available in other modules, like
time, machine and os. The only outstanding function, info(), is
(temporarily) moved to the esp module and the pyb module is removed.
2016-04-28 12:23:55 +01:00
0785040593
esp8266/Makefile: Enable "ussl" module.
...
axTLS should be built first using "make axtls".
2016-04-28 00:48:38 +03:00
941ddfe559
esp8266/Makefile: Support linking with axTLS built from source.
2016-04-28 00:48:38 +03:00
8ed3a9eb9c
esp8266/tests/onewire.py: Don't run test on import.
2016-04-27 22:32:39 +01:00
dc2c8f0b1a
esp8266/axtls_helpers: Helper/wrapper functions for axTLS.
2016-04-27 14:54:36 +03:00
648333d2d5
esp8266/Makefile: Override abort() when building axtls.
...
abort() is a special function known to compiler as no-return.
2016-04-27 13:41:59 +03:00
Paul Sokolovsky
Damien George
Radomir Dopieralski
daniel-k
Robert HH
puuu
Mark
misterdanb
Torwag
Noah Rosamilia
Mike Causer
Aex Aey
bsdfox