Commit Graph

25 Commits

Author SHA1 Message Date
Damien George ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George 09376f0e47 py: Introduce MP_ROM_NONE macro for ROM to refer to None object.
This helps to prevent mistakes, and allows easily changing the ROM value of
None if needed.
2019-12-27 22:51:17 +11:00
iabdalkader 3078a4b2e2 stm32/timer: Add missing TIM 1/15/16/17 IRQ handlers for H7 MCUs. 2019-12-19 17:19:53 +11:00
Damien George 9ec73aedb4 stm32/timer: Fix Timer.freq() calc so mult doesn't overflow uint32_t.
Fixes issue #5280.
2019-10-31 12:49:18 +11:00
Damien George ca8ff99e8c stm32: Use mp_printf with MICROPY_ERROR_PRINTER for uncaught exceptions. 2019-09-23 17:15:07 +10:00
Damien George 23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George 194d6b6788 stm32/timer: Correctly initialise extended break settings on F7/H7/L4.
Fixes issue #4693.
2019-04-15 11:41:03 +10:00
roland van straten edd0e0f93d stm32/timer: Expose the PWM BRK capability of Timer 1 and 8.
The break mode is configurable via the 'brk' keyword to the Timer
constructor and init method.  It's disabled by default.
2019-04-01 13:30:37 +11:00
Damien George 6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
boochow 9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
Damien George 46091b8a95 stm32/timer: Add tick_hz arg to Timer constructor and init method.
The period of the timer can now be specified using the "period" and
"tick_hz" args.  The period in seconds will be: period/tick_hz.  tick_hz
defaults to 1000, so if period is specified on its own then it will be in
units of milliseconds.
2018-07-17 13:36:36 +10:00
Damien George 821b59d439 stm32/timer: Use enum for indexing keyword arg in pyb_timer_init_helper. 2018-07-17 13:22:42 +10:00
Damien George e1ae9939ac stm32: Support compiling with object representation D.
With this and previous patches the stm32 port can now be compiled using
object representation D (nan boxing).  Note that native code and frozen mpy
files with float constants are currently not supported with this object
representation.
2018-07-08 23:25:11 +10:00
Damien George 37a7257aff stm32/timer: Support TIM1 on F0 MCUs. 2018-06-15 10:50:08 +10:00
Damien George ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George 5c0685912f stm32/timer: Make timer_get_source_freq more efficient by using regs.
Use direct register access to get the APB clock divider.  This reduces code
size and makes the code more efficient.
2018-05-28 21:46:20 +10:00
Damien George cb3456ddfe stm32: Don't use %lu or %lx for formatting, use just %u or %x.
On this 32-bit arch there's no need to use the long version of the format
specifier.  It's only there to appease the compiler which checks the type
of the args passed to printf.  Removing the "l" saves a bit of code space.
2018-05-04 15:52:03 +10:00
Damien George a03e6c1e05 stm32/irq: Define IRQ priorities directly as encoded hardware values.
For a given IRQn (eg UART) there's no need to carry around both a PRI and
SUBPRI value (eg IRQ_PRI_UART, IRQ_SUBPRI_UART).  Instead, the IRQ_PRI_UART
value has been changed in this patch to be the encoded hardware value,
using NVIC_EncodePriority.  This way the NVIC_SetPriority function can be
used directly, instead of going through HAL_NVIC_SetPriority which must do
extra processing to encode the PRI+SUBPRI.

For a priority grouping of 4 (4 bits for preempt priority, 0 bits for the
sub-priority), which is used in the stm32 port, the IRQ_PRI_xxx constants
remain unchanged in their value.

This patch also "fixes" the use of raise_irq_pri() which should be passed
the encoded value (but as mentioned above the unencoded value is the same
as the encoded value for priority grouping 4, so there was no bug from this
error).
2018-05-02 14:41:02 +10:00
Damien George e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
iabdalkader 0989e0cdff stm32/timer: Add Timer support for H7 MCUs. 2018-03-09 15:10:46 +11:00
Damien George 8aad22fdca stm32/timer: Support MCUs that don't have TIM4 and/or TIM5. 2018-02-13 15:53:39 +11:00
Damien George 3eb0694b97 stm32: Update HAL macro and constant names to use newer versions.
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself.  This patch switches to use those
names in most places so it is easier to update the HAL in the future.
2018-02-13 15:37:35 +11:00
Damien George d29b709642 stm32/timer: Enable ARPE so that timer freq can be changed smoothly.
The timer prescaler is buffered by default, and this patch enables ARPE
which buffers the auto-reload register.  With both of these registers
buffered it's now possible to smoothly change the timer's frequency and
have a smoothly varying PWM output.
2017-09-25 15:25:08 +10:00
Damien George d7cd1d2027 stm32/timer: Make pyb.Timer() instances persistent.
Prior to this patch calling pyb.Timer(id) would always create a new timer
instance, even if there was an existing one.  This patch fixes this
behaviour to match other peripherals, like UART, such that constructing a
timer with just the id will retrieve any existing instances.

The patch also refactors the way timers are validated on construction to
simplify and reduce code size.
2017-09-13 16:20:42 +10:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00