Commit Graph

28 Commits

Author SHA1 Message Date
Jim Mussared 52d6eeb409 esp32/boards/sdkconfig.base: Set default IDF log level to ERROR.
This commit changes the default logging level on all esp32 boards to ERROR.
The esp32 port is now stable enough that it makes sense to remove the info
logs to make the output cleaner, and to match other ports.  More verbose
logging can always be reenabled via esp.osdebug().

This also fixes issue #6354, error messages from NimBLE: the problem is
that ble.active(True) will cause the IDF's NimBLE port to reset the
"NimBLE" tag back to the default level (which was INFO prior to this
commit).  Even if the user had previously called esp.osdebug(None), because
the IDF is setting the "NimBLE" tag back to the default (INFO), the
messages will continue to be shown.

The one quirk is that if the user does want to see the additional logging,
then they must call esp.osdebug(0, 3) after ble.active(True) to undo the
IDF setting the level back to the default (now ERROR).  This means that
it's impossible (via Python/esp.osdebug) to see stack-startup logging,
you'd have to recompile with the default level changed back to INFO.
2020-09-18 15:53:56 +10:00
Jim Mussared 311b8519af esp32: Pin MicroPython and NimBLE tasks to core 0.
MicroPython and NimBLE must be on the same core, for synchronisation of the
BLE ringbuf and the MicroPython scheduler.  However, in the current IDF
versions (3.3 and 4.0) there are issues (see e.g. #5489) with running
NimBLE on core 1.

This change - pinning both tasks to core 0 - makes it possible to reliably
run the BLE multitests on esp32 boards.
2020-09-08 12:53:24 +10:00
Thorsten von Eicken 952ff8a8ea esp32: Improve support for OTA updates.
This commit adds several small items to improve the support for OTA
updates on an esp32:

- a partition table for 4MB flash modules that has two OTA partitions ready
  to go to do updates
- a GENERIC_OTA board that uses that partition table and that enables
  automatic roll-back in the bootloader
- a new esp32.Partition.mark_app_valid_cancel_rollback() class-method to
  signal that the boot is successful and should not be rolled back at the
  next reset
- an automated test for doing an OTA update
- documentation updates
2020-05-03 15:00:45 +10:00
Damien George ad004db662 esp32: Enable and freeze uasyncio. 2020-03-26 01:25:46 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Jim Mussared 3032ae1155 esp32: Enable NimBLE support on all builds (IDF 3.3 and 4.0).
This commit updates the IDFv3 version to v3.3.1, and enables the
"ubluetooth" module by default on IDFv3 builds.
2020-01-15 00:24:43 +11:00
Jim Mussared 7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Seon Rozenblum 0d82f5d8c8 esp32/boards/TINYPICO: Add tinypico.py, dotstar.py with custom manifest. 2019-12-19 10:05:01 +11:00
Andrew Leech 9ca8a503ed esp32/boards: Enable ULP in base sdk configuration.
Fixes issue #5159.
2019-12-05 15:28:56 +11:00
Jim Mussared 71299d3224 esp32/boards/sdkconfig.base: Resize SSL output buffer from 16 to 4kiB.
The IDF heap is more fragmented with IDF 4 and mbedtls cannot allocate
enough RAM with 16+16kiB for both in and out buffers, so reduce output
buffer size.

Fixes issue #5303.
2019-11-11 11:55:58 +11:00
Jim Mussared 912892b209 esp32: Add missing and necessary newline at EOF for sdkconfig.240mhz.
When these files get concatenated the newline-at-EOF is necessary so that
the start of the next file doesn't join with the end of the previous.
2019-10-21 23:54:59 +11:00
Jim Mussared 8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Josh Lloyd 59c1b7d4b8 esp32/boards: Split out CPU frequency config, make 160MHz the default.
Remove the 240MHz CPU config option from sdkconfig.base and create a new
sdkconfig.240mhz file for those boards that want to use 240MHz on boot.

The default CPU frequency is now 160MHz (was 240MHz), to align with the ESP
IDF and support more boards (eg those with D2WD chips).

Fixes issue #5169.
2019-10-18 13:42:24 +11:00
Damien George ce1de1faf0 esp32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed.  boards/manifest.py is used as a default, and can
optionally use boards/manifest_release.py for more scripts.
2019-10-15 21:37:02 +11:00
Jim Mussared 4b2b05718a esp32: Run NimBLE on the app core.
This prevents issues with concurrent access to the ringbuf.
MICROPY_BEGIN_ATOMIC_SECTION is only atomic to the same core.  We could
address this with a mutex, but it's also not safe to call mp_sched_schedule
across cores.
2019-10-15 17:22:15 +11:00
Jim Mussared 418f12c5f5 extmod/modbluetooth: Increase maximum connections from 1 to 4.
This avoids a confusing ENOMEM raised from gap_advertise if there is
currently an active connection.  This refers to the static connection
buffer pre-allocated by Nimble (nothing to do with MicroPython heap
memory).
2019-10-15 17:20:25 +11:00
Jim Mussared d5cbee3cfb esp32: Add 4.x version of IDLE WDT config. 2019-10-11 14:30:47 +11:00
Jim Mussared 6a9bd1c1ab esp32: Implement BLE using Nimble from IDF 4.x. 2019-10-08 14:50:01 +11:00
Jim Mussared 96008ff59a esp32: Support building with ESP IDF 4.0-beta1.
This commit adds support for a second supported hash (currently set to the
4.0-beta1 tag).  When this hash is detected, the relevant changes are
applied.

This allows to start using v4 features (e.g. BLE with Nimble), and also
start doing testing, while still supporting the original, stable, v3.3 IDF.

Note: this feature is experimental, not well tested, and network.LAN and
network.PPP are currently unsupported.
2019-09-17 12:25:36 +10:00
Alex Albino 80d37d936c esp32: Add support for ESP32-D2WD with 2MiB internal flash.
This patch adds a partitions file for the D2WD and a new board GENERIC_D2WD
which runs on these chip variants.

Resolves issue #4986.
2019-09-10 15:22:16 +10:00
Damien George e9af6f5f88 esp32/boards/TINYPICO: Switch to use QIO and 80MHz for SPI interface. 2019-09-10 11:10:19 +10:00
Jim Mussared 8db517f26d esp32: Add per-board configs, following other ports.
Replaces the `SDKCONFIG` makefile variable with `BOARD`.  Defaults to
BOARD=GENERIC.  spiram can be enabled with `BOARD=GENERIC_SPIRAM`

Add example definition for TINYPICO, currently identical to GENERIC_SPIRAM
but with custom board/SoC names for the uPy banner.
2019-08-16 00:22:29 +10:00
Damien George 69cb24a21d esp32/boards/sdkconfig: Disable WDT check of idle task on CPU1.
With dual-core enabled it's possible that the uPy task has full utilisation
of CPU1.  Fixes issue #4673.
2019-04-05 12:25:21 +11:00
Damien George 92149c8a79 esp32/boards: Enable dual core support by default.
Single core is still supported, just by adding CONFIG_FREERTOS_UNICORE=y to
a custom sdkconfig file.
2019-03-27 11:20:21 +11:00
Damien George c33f538066 esp32/modmachine: Add support for changing the CPU frequency. 2019-02-07 22:51:55 +11:00
Damien George 6a95e74387 esp32: Use SPIRAM in mem-map mode so all of it can be used for uPy heap.
Also enable CONFIG_SPIRAM_IGNORE_NOTFOUND to allow boards with faulty or
missing SPIRAM to still boot.
2019-02-06 00:10:50 +11:00
Damien George f431795caf esp32/boards: Use auto xtal freq config instead of default 40MHz.
Auto-detection of the crystal frequency is convenient and allows for a
single binary for many different boards.  But it can be unreliable in
certain situations so in production, for a given board, it's recommended to
configure the correct fixed frequency.
2019-01-28 20:42:12 +11:00
Damien George 3d49b157b8 esp32: Update to latest ESP IDF using sdkconfig and new ldgen procedure.
Configuration for the build is now specified using sdkconfig rather than
sdkconfig.h, which allows for much easier configuration with defaults from
the ESP IDF automatically applied.  sdkconfig.h is generated using the new
ESP IDF kconfig_new tool written in Python.  Custom configuration for a
particular ESP32 board can be specified via the make variable SDKCONFIG.

The esp32.common.ld file is also now generated using the standard ESP IDF
ldgen.py tool.
2019-01-28 12:44:03 +11:00