f92f7dd2bc
stmhal/boards: For STM32F411DISC, change I2C pin according to datasheet.
...
The pin had to be changed to get the I2C sensors on board to work.
2017-02-13 11:32:27 +11:00
0f408bc1ff
stmhal: Move PY_SYS_PLATFORM config from board to general config file.
...
It can be overridden by a board if needed.
2016-12-13 16:26:45 +11:00
27a503f632
stmhal: Refactor UART configuration to use pin objects.
...
This follows the pattern of other peripherals (I2C, SPI) to specify the
pins using pin objects instead of a pair of GPIO port and pin number. It
makes it easier to customise the UART pins for a particular board.
2016-12-05 14:26:41 +11:00
7928b3e347
stmhal/boards: configure all F4 boards to work with new HAL
...
changes include:
* use single GPIO.BSRR instead of BSRRH and BSRRL
* change HSE_STARTUP_TIMEOUT to 100 ms
* define LSE_STARTUP_TIMEOUT to 5 s
2016-11-16 12:43:27 +01:00
b4cc68e4a4
stmhal/led: Refactor LED to use mp_hal_pin_output() init function.
...
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
2016-10-18 14:43:05 +11:00
97a0846af9
stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.
...
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
2016-02-06 15:07:01 +02:00
f7c4f9a640
stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.
...
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1. Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS. This makes it the same as how I2C is configured.
2015-12-12 15:02:02 +00:00
86e6ad76cb
stmhal: Add support for STM32F411 Discovery Board (STM32F411E-DISCO).
2015-08-29 22:50:58 +01:00
Johannes Wågen
Damien George
Rami Ali
Krzysztof Blazewicz
Paul Sokolovsky
Bob Clough