Commit Graph

53 Commits

Author SHA1 Message Date
Paul Sokolovsky e6af94d13b esp8266/modesp: Add flash_user_start() function.
As we're looking towards adding OTA support, calculation of a FlashROM
area which can be used for filesystem (etc.) may become complex, so
introduce C function for that. So far it just hardcodes current value,
0x90000. In the future the function may be extended (and renamed) to
return the size of area too.
2016-10-24 16:52:15 +03:00
Paul Sokolovsky 3b3612c65b esp8266: Make neopixel support configurable.
To save iRAM.
2016-10-09 00:56:46 +03:00
Damien George 23a568240d esp8266: Use mp_raise_OSError helper function. 2016-10-07 14:00:51 +11:00
Damien George 93c4a6a3f7 all: Remove 'name' member from mp_obj_module_t struct.
One can instead lookup __name__ in the modules dict to get the value.
2016-09-22 00:23:16 +10:00
Paul Sokolovsky e33d2383d1 esp8266/modesp: Add check_fw() function to check integrity of the firmware.
Requires firmware generated by the latest makeimg.py (which stores size
and md5 of the firmware together with the firmware itself).
2016-08-04 00:29:19 +03:00
Paul Sokolovsky 0e4cae5212 esp8266: Make APA102 driver inclusion configurable. 2016-08-01 00:03:55 +03:00
puuu ee12581a35 esp8266: Let RTC work correctly after deepsleep.
By design, at wake up from deepsleep, the RTC timer will be reset, but
the data stored in RTC memory will not [1]. Therefore, we have to adjust
delta in RTC memory before going into deepsleep to get almost correct
time after waking up.

[1] http://bbs.espressif.com/viewtopic.php?t=1184#p4082
2016-06-06 10:51:12 +01:00
Damien George 45f3416816 esp8266: Enable DHT C-level driver.
Exposed as esp.dht_readinto.  Probably should go somewhere less
port-specific.
2016-05-26 17:11:43 +01:00
misterdanb a0a08b4be1 esp8266: Add APA102 serial individually controllable LEDs support.
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
2016-05-19 22:29:11 +03:00
Damien George 4f2ba9fbdc esp8266: Convert to use new MP_Exxx errno symbols.
These symbols are still defined in terms of the system Exxx symbols, and
can be switched to internal numeric definitions at a later stage.

Note that extmod/modlwip still uses many system Exxx symbols.
2016-05-10 23:30:39 +01:00
Paul Sokolovsky 76c81cd5a6 esp8266/modesp: Add malloc() and free() functions.
Useful for testing fragmentation issues in OS heap. E.g. freemem() may
report large amount, but is it possible to actually allocate block of
a given size? Issue malloc() (followed by free()) to find out.
2016-05-03 00:35:11 +03:00
Paul Sokolovsky 2123ced3f4 esp8266/modesp: Add esf_free_bufs() debugging function.
Return number of free inernal WiFi buffers.
2016-05-03 00:26:22 +03:00
Damien George a6aa35af09 esp8266: Move pyb.info() function to esp module and remove pyb module.
All functionality of the pyb module is available in other modules, like
time, machine and os.  The only outstanding function, info(), is
(temporarily) moved to the esp module and the pyb module is removed.
2016-04-28 12:23:55 +01:00
Paul Sokolovsky 6d103b6548 py: Move call_function_*_protected() functions to py/ for reuse.
They almost certainly needed by any C code which calls Python callbacks.
2016-04-25 19:31:17 +03:00
Paul Sokolovsky 89e56a80b8 esp8266/modesp: Add flash_size() function.
Returns FlashROM size in bytes from vendor SDK's point of view, not
physical size.
2016-04-18 17:12:57 +03:00
Damien George d76ebde85e esp8266/modesp: Allow esp.deepsleep to take 2nd arg for RF wake opt. 2016-04-17 16:28:47 +01:00
Paul Sokolovsky 1cc81ed449 esp8266/modesp: Add freemem() and meminfo() functions.
They call into vendor SDK functions system_get_free_heap_size() and
system_print_meminfo() respectively.
2016-04-11 01:16:38 +03:00
Damien George 96eca22322 esp8266: Make destination for vendor OS debug output soft-configurable.
Use esp.osdebug(None) to disable, or esp.osdebug(uart_id) to send output
to a UART.
2016-04-06 00:12:58 +03:00
Paul Sokolovsky 5531437941 esp8266: Move PHY mode constants from modesp to modnetwork. 2016-04-01 12:10:11 +03:00
Paul Sokolovsky bbc65d4eda esp8266/modesp: flash_read(): Accept buffer to read to as a second argument. 2016-03-27 15:34:35 +03:00
Paul Sokolovsky fd86bf5917 esp8266/modesp: flash_write(): Writes in multiples of 4 bytes. 2016-03-27 15:32:58 +03:00
Damien George 3962766be0 esp8266: Add esp.neopixel_write function to bit-bang WS2812 data. 2016-03-26 10:55:21 +02:00
Paul Sokolovsky e5c39a3a9e esp8266: Switch to lwIP built from source.
Using https://github.com/pfalcon/esp-open-lwip project.
2016-03-12 11:45:53 +07:00
Paul Sokolovsky 7378c50b2f esp8266: Move wifi_mode() and phy_mode() to network module. 2016-03-10 09:29:21 +07:00
Alex March 81407729a5 esp8266/modesp: Implement flash_write(), flash_erase(). 2016-02-08 11:42:24 +02:00
Damien George 5b3f0b7f39 py: Change first arg of type.make_new from mp_obj_t to mp_obj_type_t*.
The first argument to the type.make_new method is naturally a uPy type,
and all uses of this argument cast it directly to a pointer to a type
structure.  So it makes sense to just have it a pointer to a type from
the very beginning (and a const pointer at that).  This patch makes
such a change, and removes all unnecessary casting to/from mp_obj_t.
2016-01-11 00:49:27 +00:00
Paul Sokolovsky 43fecb0acb esp8266/modesp: Allow to compile out proprietary espconn stuff. 2015-12-30 15:53:51 +02:00
Paul Sokolovsky fce0036a67 esp8266: mac() function belongs to network module per the latest API. 2015-12-27 10:03:32 +02:00
Paul Sokolovsky abd0fcfc86 esp8266: Remove superfluous includes. 2015-12-21 22:08:06 +02:00
Paul Sokolovsky e13d462f77 esp8266/modesp: flash_read() takes 2 args (fix typo). 2015-12-21 22:07:11 +02:00
Paul Sokolovsky 90202b4c0d esp8266/modesp: Implement flash_read(offset, size_bytes) function.
Based on vendor API documentation, untested on real hardware.
2015-11-24 23:29:26 +02:00
Damien George 731f359292 all: Add py/mphal.h and use it in all ports.
py/mphal.h contains declarations for generic mp_hal_XXX functions, such
as stdio and delay/ticks, which ports should provide definitions for.  A
port will also provide mphalport.h with further HAL declarations.
2015-10-31 19:14:30 +03:00
Bill Owens a66a99bfd8 esp8266: Added wifi_mode() to read and set WiFi operating mode. 2015-08-29 16:58:51 +03:00
Damien George 75b1d881ec esp8266: Use m_new/m_renew/m_del funcs instead of private gc_xxx. 2015-07-20 12:14:21 +01:00
Paul Sokolovsky ab14c30493 esp8266: modesp: Update for gc_realloc() refactor.
TODO: Contributed code in modesp incorrectly uses private gc_* API.
2015-07-19 00:28:16 +03:00
Bill Owens 60ccb41fac esp8266: Move status() from esp module to network 2015-06-20 23:35:55 +03:00
Bill Owens 686516f90a esp8266: Move scan from esp module to network 2015-06-17 23:13:12 +03:00
Bill Owens 3ce212e0a6 esp8266: Changed esp_scan to keep the current WiFi operating mode but throw an exception if WiFi is in AP only mode 2015-06-14 10:57:08 +03:00
Paul Sokolovsky 32eb4b9055 esp8266: Move connect/disconnect from "esp" module to network. 2015-06-12 17:45:28 +03:00
Paul Sokolovsky 431603ad69 esp8266: esp_connect(): The function is now vararg.
Fixes regression from a previous commit.
2015-06-12 14:26:44 +03:00
Paul Sokolovsky a32538bb66 esp8266: Do not call espconn_create in constructor of esp.socket.
Turns out this is supposed to be called only for UDP connections.

Patch by Josef Gajdusek.
2015-06-02 22:40:06 +03:00
Josef Gajdusek 286ced4c2f esp8266: Add a bunch of miscellaneous methods 2015-05-28 21:38:46 +03:00
Josef Gajdusek d39d96b700 esp8266: Add .onsent callback support
The function passed to socket.onsent() gets called after data is succesfully
sent by the socket.
2015-05-06 21:47:44 +01:00
Josef Gajdusek 2d56df67cd esp8266: Initialize socket->connlist to NULL
This was causing crashes in .onconnect()
2015-05-06 21:47:43 +01:00
Josef Gajdusek 82d08dccc6 esp8266: Fix endian of address returned by esp.getaddrinfo() 2015-05-05 22:19:48 +01:00
Josef Gajdusek 9e00ac89d5 esp8266: Add esp.socket class, with ESP-style socket functionality.
* UDP currently not supported
 * As there is no way (that I know of) the espconn_regist_connectcb()
   callback can recognize on which socket has the connection arrived,
   only one listening function at a time is supported
2015-05-04 11:48:40 +01:00
Josef Gajdusek 7e7039b53c esp8266: Export station status() constants 2015-05-03 22:07:00 +03:00
Damien George 7f9d1d6ab9 py: Overhaul and simplify printf/pfenv mechanism.
Previous to this patch the printing mechanism was a bit of a tangled
mess.  This patch attempts to consolidate printing into one interface.

All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf.  All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.

Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform.  The former is only used when MICROPY_PY_IO is defined.

With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...).  Code size is also reduced by around 200 bytes on
Thumb2 archs.
2015-04-16 14:30:16 +00:00
Paul Sokolovsky d6f648d04f esp8266: modesp: Add status() function for connection status. 2015-02-05 00:39:02 +02:00
Paul Sokolovsky 1cd47c6315 esp8266: modesp: Add disconnect() function to disconnect from WiFi AP. 2015-02-03 02:02:29 +02:00