b4c9a25eab
stmhal: Add support for quadrature encoder mode to pyb.TimerChannel.
2015-03-09 13:23:14 +00:00
b57b56f293
docs: Update pyb.Timer.rst to fix pulse widths that exceed the period.
2015-03-09 12:14:32 +00:00
4fddbe5ab6
docs: Correct the documentation for math.frexp.
2015-02-23 22:15:11 +00:00
3527085587
pyb.UART.rst: Clean up note about stream protocol support.
2015-02-22 13:36:35 +02:00
77fc276c08
stmhal: For UART, check that baudrate is within 5% of desired value.
...
Also includes documentation about minimum baudrate.
Addresses issue #1090 .
2015-02-22 00:26:49 +00:00
f80f1a7077
stmhal: Add support for CAN rx callbacks.
2015-02-15 03:10:53 +00:00
baafb290ad
stmhal: Add uart.sendbreak() method, to send a break condition.
2015-02-13 19:04:24 +00:00
d39c7aa517
stmhal: Add Python-configurable USB HID mode.
...
Different HID modes can be configured in Python. You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
73533247cb
docs: Fix frequency info for DAC.triangle.
2015-01-20 23:56:10 +00:00
3990dcfcd7
docs: Add note about maximum frequency of busses.
2015-01-08 22:54:26 +00:00
7a0636e80a
docs: Add initial "uctypes" modules docs. WIP.
2015-01-08 00:17:10 +02:00
ddbcc79550
docs: Add quickref info about Servo; improve Servo docs.
2015-01-01 18:00:45 +00:00
7690b13953
stmhal: Add ability to mount custom block device.
2014-12-27 20:20:51 +00:00
a37656c132
docs: Make admonition for CPy-difference use "attention" class.
...
This renders it in yellow/orange box on RTD server.
2014-12-22 13:42:30 +00:00
6d3ae569cf
docs: Add CPy diff note for print_exception; embellish sys.platform.
2014-12-19 22:10:38 +00:00
9642846d71
docs: Define more clearly the behaviour of LED methods.
...
Addresses issue #1006 .
2014-12-16 11:55:46 +00:00
6c3fc74656
docs: Add sys.print_exception().
2014-12-10 20:31:38 +02:00
b66a31c42c
stmhal: Allow SPI.init to specify prescaler directly; improve SPI docs.
2014-12-08 21:34:07 +00:00
008251180d
stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
...
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00
41c07d5b80
docs: uzlib: Typo fix.
2014-12-05 02:08:30 +02:00
adf4c4cea8
docs: Add quick docs for uzlib.
2014-12-05 00:40:35 +02:00
c0b3d4540b
docs: Update network docs to reflect changes to code.
2014-12-04 19:43:56 +00:00
3a5352b483
docs: Add skeleton docs for ure module.
2014-12-04 00:07:00 +02:00
d8fd3103fa
docs: Add quick docs for ubinascii.
2014-12-02 01:51:56 +02:00
d96a916405
docs: Add quick docs for uhashlib.
2014-12-02 00:53:19 +02:00
7f0699eedf
docs: Sort "micro-library" module list alphabetically.
2014-12-01 20:42:38 +02:00
d8c2b2a1c4
Update documentation for the CAN class
2014-11-30 01:04:56 +00:00
19fb1b4dd7
stmhal: Add USB_VCP.setinterrupt method, to disable CTRL-C.
2014-11-29 15:23:21 +00:00
9aae41121b
Update uheapq.rst
...
Erratum in froh.
2014-11-28 17:32:29 +00:00
d1b42d7b51
stmhal: Improve CAN init so that it can take sjw, bs1, bs2 args.
...
Also update docs to explain how CAN baudrate is determined.
2014-11-15 21:28:14 +00:00
ca0b0cb83f
Document parameter "data" of i2c.mem_read() more clear
...
Hi,
i would like to add a little clarification to the parameter "data" of i2c.mem_read(): I misunderstood
``data`` can be an integer or a buffer to read into
as "i can give a integer variable to read a integer into" . This pull-request adds the following clarification:
``data`` can be an integer (number of bytes to read) or a buffer to read into
Thanks for your great work!
Best wishes,
Matthias
2014-11-15 18:31:37 +00:00
d8474d3617
docs: select: Describe extra details.
2014-11-09 01:48:05 +02:00
8e701604d5
docs: Add links from quickref to pyb classes.
2014-11-04 18:25:20 +00:00
bc0bc764fc
docs: Add debounce tutorial; order Pin methods; add pull resistor info.
2014-11-04 18:07:06 +00:00
6e6dfdc56b
docs: Make custom index page; add more docs.
2014-11-02 23:37:02 +00:00
38bd762121
stmhal: Improve pyb.freq to allow 8 and 16MHz (not usable with USB).
...
Also restrict higher frequencies to have a VCO_OUT frequency below
432MHz, as specified in the datasheet.
Docs improved to list allowed frequencies, and explain about USB
stability.
2014-11-02 15:10:15 +00:00
a58713a899
docs: Cleanup and update some docs.
2014-10-31 22:21:37 +00:00
109c1de015
py: Make gc.enable/disable just control auto-GC; alloc is still allowed.
...
gc.enable/disable are now the same as CPython: they just control whether
automatic garbage collection is enabled or not. If disabled, you can
still allocate heap memory, and initiate a manual collection.
2014-10-31 21:30:46 +00:00
4029f51842
stmhal: Fix UART so bits counts number of data bits, not incl parity.
...
Addresses issue #950 .
2014-10-31 20:28:10 +00:00
88d3054ac0
docs: Import documentation from source-code inline comments.
...
The inline docs (prefixed with /// in .c files) have been converted to
RST format and put in the docs subdirectory.
2014-10-31 01:37:19 +00:00
Dave Hylands
Peter Hinch
Damien George
Paul Sokolovsky
Henrik Sölver
inaugurator
Matthias