djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
14,304 Commits 21 Branches 274 Tags 785 MiB
38e38b9f8d
Commit Graph

2257 Commits

Author SHA1 Message Date
Hierophect
38e38b9f8d remove redundant comment 2019-11-04 17:20:10 -05:00
Hierophect
632b3267dc Add auto-shutoff of DAC when channels de-inited 2019-11-04 17:08:00 -05:00
Dan Halbert
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable 
cpb: Disable the onboard speaker until request
 2019-11-03 18:34:29 -05:00
Scott Shawcroft
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c 
nrf: allocate two I2C on CPB
 2019-11-03 13:15:36 -08:00
Dan Halbert
85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
jepler
2bdccf03a7 cpb: define the SPEAKER_ENABLE_PIN 
This allows the board to disable the onboard speaker until explicitly
enabled in user code.

Testing performed on a CPB:
 * Touching the AUDIO pin with a fingertip no longer generates noise/buzz
 * Generating a waveform with `simpleio.tone` produces no sound by default
 * When the board.SPEAKER_ENABLE is configured as a digital output and
   set True, `simpleio.tone` does produce sound

Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to

    speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
    speaker_enable.direction = digitalio.Direction.OUTPUT
    speaker_enable.value = True

before using the internal speaker.

Closes: #2258
 2019-11-01 16:26:03 -05:00
jepler
fe47eba97f nRF: Handle SPEAKER_ENABLE_PIN 
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
 2019-11-01 16:23:35 -05:00
brentru
2f04c5891f flip it around 2019-10-31 14:11:50 -04:00
brentru
ab3da3071c flip MADCTL BGR bit to reflect RGB colors 2019-10-31 10:11:47 -04:00
ladyada
d2b613134d we should use native rotation, and tweak madctl (not done yet) 2019-10-29 22:53:44 -04:00
ladyada
1e869d1334 switch to 8-bit mode - tested on hardware! 2019-10-29 21:14:45 -04:00
Dan Halbert
e35eb08f1d nrf: allocate two I2C on CPB 2019-10-28 21:08:53 -04:00
Dan Halbert
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086 
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
 2019-10-28 14:50:01 -04:00
Dan Halbert
1d7d9043c1 CXD56 is a better platform name 2019-10-28 10:47:09 -04:00
Dan Halbert
358920db0e Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only 2019-10-28 10:40:10 -04:00
Jeff Epler
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express 
Initial Itsy nRF52840 defn
 2019-10-27 16:46:28 -05:00
Dan Halbert
76817eaa10 Merge remote-tracking branch 'adafruit/master' into nano-33-ble 2019-10-25 22:41:26 -04:00
Dan Halbert
ab6fd34828 add object types to rgb status objects;mark spi rgb objects as never_reset 2019-10-25 22:32:43 -04:00
Dan Halbert
7d04d9109e use bitbang SPI for DotStar; still need to fix hw SPI for dotstar 2019-10-25 15:37:27 -04:00
Thea Flowers
4b742f88d9
Fix spelling 2019-10-25 10:50:27 -07:00
Dan Halbert
cdeb0857a9 Initial Itsy nRF52840 defn 2019-10-25 11:15:34 -04:00
hierophect
3683ee3ffa
Merge pull request #2243 from hierophect/f405-rename-and-fixes 
STM32: rename feather_stm32f405_express, fix makefile defs issue
 2019-10-24 14:11:17 -04:00
Hierophect
511071e1ba Rename feather across folders and config, fix makefile def issue 2019-10-24 12:51:40 -04:00
Thea Flowers
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors 
Fixes #2086

When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
 2019-10-23 14:34:14 -07:00
ProductDev
4cd5571203 Adds builds for sparkfun_qwiic_micro with and without flash 2019-10-23 15:05:46 -06:00
Dan Halbert
af1fab1915
Merge pull request #2226 from kamtom480/circuitpython-device-open 
Do not open the same PWM device if it is already open
 2019-10-23 15:08:40 -04:00
Kamil Tomaszewski
e4574fa3bf Clean UART on reset 2019-10-21 13:17:51 +02:00
Kamil Tomaszewski
e2cb29f2a0 Change default stack size to 64kiB for Spresense 2019-10-18 15:43:06 +02:00
Kamil Tomaszewski
3ad13e14d8 Do not open the same UART device again 2019-10-18 12:39:52 +02:00
Kamil Tomaszewski
b39ca3f8be Do not open the same PWM device again 2019-10-18 12:39:22 +02:00
Kamil Tomaszewski
1decd111d5 Do not open the same ADC device again 2019-10-18 12:38:39 +02:00
Kamil Tomaszewski
4338511b28 Add get top and limit functions for Spresense 2019-10-18 11:10:22 +02:00
Kamil Tomaszewski
96756b3945 Add functions to get top and limit stack 2019-10-18 11:04:45 +02:00
Kamil Tomaszewski
30c9ad2b2a Update Spresense SDK to 1.4.1 2019-10-18 10:29:32 +02:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX 2019-10-17 18:02:05 +11:00
Scott Shawcroft
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master 
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
 2019-10-15 09:46:39 -07:00
Scott Shawcroft
6f2e2faff2
Merge pull request #2214 from dhalbert/remove-unused-ports 
Remove non-CircuitPython ports
 2019-10-15 09:45:53 -07:00
Dan Halbert
a0d18ac4e6 add dummy common_hal_mcu_processor_get_voltage() for spresense 2019-10-15 09:07:12 -04:00
Dan Halbert
eca73436c9 Merge remote-tracking branch 'adafruit/master' into cpu-voltage 2019-10-15 09:03:24 -04:00
Dan Halbert
fdd7ebef2d change calibration from analogin_reset() to analogin_init() 2019-10-14 23:38:41 -04:00
Scott Shawcroft
1a7c787d3c
Merge branch 'master' into master 2019-10-14 19:47:46 -07:00
Dan Halbert
615ec7f74d merge from upstream 2019-10-14 18:12:58 -04:00
Scott Shawcroft
51582abc87
Merge pull request #2207 from kamtom480/circuitpython-spresense 
Add Spresense board
 2019-10-14 14:19:09 -07:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder 2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs 2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions 2019-10-14 11:55:22 -07:00
Kamil Tomaszewski
b750ed3a0f Change Spresense firmware download link 2019-10-14 08:42:10 +02:00
Kamil Tomaszewski
8dfc8b584f Change Spresense reference_voltage to 0.0 (None) 2019-10-14 08:22:14 +02:00
Dan Halbert
9c8f969b34 remove ports/zephyr 2019-10-13 11:09:55 -04:00
Dan Halbert
0bed5f490a remove ports/windows 2019-10-13 11:09:43 -04:00