Commit Graph

99 Commits

Author SHA1 Message Date
robert-hh 564945a2a0 nrf/boards/seeed_xiao_nrf52: Add defn for Seeed XIAO NRF52840 Sense.
It keeps compatibility with the XIAO bootloader by:
- using Soft Device 7.3.0
- reserving 48k memory for the bootloader.

So on double reset a drive pops for uploading an uf2 image or a nrfutil zip
pkg file.  Instructions to create it from a hex file are included.  The
bootloader can as well be activated with the touch 1200 option of nrfutil.

The script download_ble_stack.sh has been adapted to get the version 7.3.0
soft device files.  It may have to be executed once before building.

The file system is set to 256k and the pin definitions are adapted.
Besides that, it has the common functionality and omissions.  The on-board
sensors and additional flash can be supported by Python scripts.
2022-12-15 14:27:08 +11:00
Damien George e8f5cfe0e1 nrf: Rename MICROPY_PY_MACHINE_TIMER to MICROPY_PY_MACHINE_TIMER_NRF.
So that it doesn't clash with the extmod version.

Also make the default for this enabled, so that most boards do not need to
configure it.

Signed-off-by: Damien George <damien@micropython.org>
2022-10-27 14:30:58 +11:00
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared 9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 42587c7870 all: Standardise mp_obj_type_t initialisation.
Remove setting unused slots.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 18:41:29 +10:00
Jim Mussared fb2a57800a all: Simplify buffer protocol to just a "get buffer" callback.
The buffer protocol type only has a single member, and this existing layout
creates problems for the upcoming split/slot-index mp_obj_type_t layout
optimisations.

If we need to make the buffer protocol more sophisticated in the future
either we can rely on the mp_obj_type_t optimisations to just add
additional slots to mp_obj_type_t or re-visit the buffer protocol then.

This change is a no-op in terms of generated code.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 18:40:39 +10:00
Jim Mussared d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared 203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
iabdalkader 768cbea507 nrf/boards/arduino_nano_33_ble_sense: Update deploy instructions. 2022-07-20 17:16:15 +10:00
David Lechner 8a69c54211 nrf: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the nrf port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
iabdalkader 5c31a6c023 nrf/boards/arduino_nano_33_ble: Add Arduino Nano 33 BLE sense board. 2022-07-07 23:58:03 +10:00
Damien George efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Jim Mussared f67ac90fa9 nrf: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Damien George df3f59ca4b ports: Update board.json files to link to new board images.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00
Mike Causer 7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Glenn Ruben Bakke 55d4321c3e nrf/boards: Enable MICROPY_VFS_LFS2 for all target boards.
Enable LittleFS v2 for all targets, except nrf51 targets when SoftDevice is
present.
2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke ffc636de2f nrf/boards: Set FROZEN_MANIFEST blank when SD present on nrf51 targets. 2021-08-08 23:17:55 +10:00
Glenn Ruben Bakke 3b594f7b27 nrf/boards/common.ld: Calculate unused flash region.
Calculate the unused flash area on the target device.  The values will be
exposed by _unused_flash_start and _unused_flash_length.  The start address
and the length are not aligned to either word or pages.
2021-08-08 23:09:26 +10:00
David Lechner ca920f7218 py/mpstate: Make exceptions thread-local.
This moves mp_pending_exception from mp_state_vm_t to mp_state_thread_t.
This allows exceptions to be scheduled on a specific thread.

Signed-off-by: David Lechner <david@pybricks.com>
2021-06-19 09:43:44 +10:00
Bruno Martins ea2d83e961 nrf/boards: Add support for evk_nina_b3 board. 2021-05-18 12:14:57 +10:00
Damien George bd54eb566f nrf/boards/microbit: Use mp_sched_exception() where appropriate.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Glenn Ruben Bakke d0b8554df4 nrf: Change selected boards to utilize pre-flashed bootloader.
The nrf52840-mdk-usb-dongle and pca10050 comes with a pre-flashed
bootloader (OpenBootloader).

This commit updates the boards "mpconfigboard.mk" to use DFU as
default flashing method and set the corresponding BOOTLOADER
settings such that nrf52840_open_bootloader_1.2.x.ld linker
script is used.

The default DFU flashing method can be disabled by issuing "DFU=0"
when invoking make. This will lead to "segger" being used as default
flashing tool. When using "DFU=0", the linker scripts will not
compensate for any MBR and Bootloader region being present, and might
overwrite them if they were present.

The commit also removes the custom linker script specific to
nrf52840-mdk-usb-dongle as it now points to a generic.

Updated nrf52840-mdk-usb-dongle's README.md to be more clear on
how to deploy the built firmware.

The port README.md has also been updated. In the list of target
boards a new column has been added to indicate which bootloader
is present on the target board. And for consistency, changed all
examples in the README.md to use "deploy" instead of "flash".
2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke 7f405236a3 nrf/boards: Add linker script for nrf52840 Open Bootloader 1.2.0. 2020-12-07 20:04:50 +01:00
Glenn Ruben Bakke 2489688635 nrf/boards: Update memory.ld to include bootloader offsets.
Adding variables that can be set from other linker scripts:

- _bootloader_head_size:
    Bootloader flash offset in front of the application.

- _bootloader_tail_size:
    Bootloader offset from the tail of the flash.
    In case the bootloader is located at the end.

- _bootloader_head_ram_size:
    Bootloader RAM usage in front of the application.

Updated calculations of application flash and RAM.
2020-12-07 20:04:50 +01:00
Damien George 06659077a8 all: Update Python code to conform to latest black formatting.
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 15:18:01 +10:00
Matt Trentini 486cb6dd4a nrf: Add board definition for nRF52840-MDK-USB-Dongle. 2020-07-16 23:47:13 +10:00
Glenn Ruben Bakke 95d0d1c486 nrf/boards: Enable RTCounter machine module for nrf9160 boards.
Resolves dependencies for MICROPY_PY_TIME_TICKS which
requires to link against nrfx_rtc.c functions by setting
MICROPY_PY_MACHINE_RTCOUNTER to 1.
2020-07-16 11:48:52 +02:00
Alex Tsamakos f743bd3d25
nrf/boards: Add initial support for Actinius Icarus.
Example make command:

make BOARD=actinius_icarus
2020-07-10 03:48:30 +02:00
Jim Mussared cd9a8c1742 nrf: Add openocd as a supported flasher.
Tested with the Particle Debugger on a Xenon.
2020-05-15 15:06:02 +10:00
Jim Mussared e7f8c7d9a3 nrf: Update to work with nrfx v2.0.0, to match TinyUSB.
Commit 6cea369b89 updated the TinyUSB
submodule to a version based on nrfx v2.0.0.  This commit updates the nrf
port to work with the latest TinyUSB and nrfx v2.0.0.
2020-05-15 15:06:02 +10:00
Damien George 8e048d2548 all: Clean up error strings to use lowercase and change cannot to can't.
Now that error string compression is supported it's more important to have
consistent error string formatting (eg all lowercase English words,
consistent contractions).  This commit cleans up some of the strings to
make them more consistent.
2020-04-13 22:19:37 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George ad9a0ec8ab all: Convert exceptions to use mp_raise_XXX helpers in remaining places. 2020-03-18 17:26:19 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George ac8383a95d nrf: Use MICROPY_HW_ENABLE_RNG instead of MICROPY_PY_RANDOM_HW_RNG.
The "random" module no longer uses the hardware RNG (the extmod version of
this module has a pseudo-random number generator), so the config option
MICROPY_PY_RANDOM_HW_RNG is no longer meaningful.  This commit replaces it
with MICROPY_HW_ENABLE_RNG, which controls whether the hardware RNG is
included in the build.
2020-02-18 12:43:16 +11:00
caochaowu 61f64c78a6 nrf/boards/common.ld: Add ENTRY(Reset_Handler) in linker script.
It's not strictly needed but can be helpful when using a debugger.
2020-02-01 00:09:44 +11:00
Daniel Mizyrycki 2df6a0436d nrf/boards/particle_xenon: Enable USB CDC on Particle Xenon board. 2019-12-09 14:10:24 +11:00
Damien George c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Glenn Ruben Bakke 98c2eabaff nrf/boards: Add nrf9160 pca10090 board. 2019-10-10 21:36:20 +02:00
Glenn Ruben Bakke 82fe6b0526 nrf: Add nrf9160 base support.
This patch add basic building blocks for nrf9P60.

It also includes a secure bootloader which forwards all
possible peripherals that are user selectable to become
non-secure. After configuring Flash, RAM and peripherals
the secure bootloader will jump to the non-secure domain
where MicroPython is placed.

The minimum size of a secure boot has to be a flash
block of 32Kb, hence why the linker scripts are
offsetting the main application this much.

The RAM offset is set to 128K, to allow for later
integration of Nordic Semiconductor's BSD socket
library which reserves the range 0x20010000 - 0x2001FFFF.
2019-10-10 21:35:27 +02:00
Glenn Ruben Bakke 01a3110e36 nrf/boards: Add support for pca10059.
Add support for pca10059 with REPL over tinyusb USB CDC.

The board also includes a board specific module that will
recover UICR->REGOUT0 in case this has been erased.

This initial support does not preserve any existing bootloader
on the pca10090 in case this was present, and expects to use all
available flash on the device.
2019-10-10 20:21:07 +02:00
roland van straten ac112f88d0 nrf/boards: Add board definition for uBlox Nina B1 series BLE modules. 2019-09-17 11:33:48 +10:00
Jim Mussared 1f52a6f8e4 nrf/boards: Add Particle Xenon board configuration (an nRF52840). 2019-09-05 22:56:05 +10:00
Jim Mussared 353ed7705f nrf/boards/make-pins.py: Fix gen of board pins to use correct index.
It was previously not taking into account that the list of pins was sparse,
so using the wrong index.  The boards/X/pins.csv was generating the wrong
data for machine.Pin.board.

As part of this fix rename the variables to make it more clear what the
list contains (only board pins).
2019-09-05 22:52:24 +10:00
Damien George 1fe1ff935b nrf: Clean up source by removing tabs, trailing spaces, non-ASCII chars. 2019-08-28 13:34:45 +10:00
Glenn Ruben Bakke d889def06b nrf/led: Adjust how board LEDs are defined.
Change static LED functions to lowercase names, and trim down source code
lines for variants of MICROPY_HW_LED_COUNT.  Also rename configuration for
MICROPY_HW_LEDx_LEVEL to MICROPY_HW_LEDx_PULLUP to align with global PULLUP
configuration.
2019-06-25 16:02:31 +10:00