djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
29,526 Commits 21 Branches 274 Tags 785 MiB
362018dcca
Commit Graph

874 Commits

Author SHA1 Message Date
Bill Sideris
362018dcca
Merge branch 'main' into picow-ap 2022-11-30 19:11:03 +02:00
Scott Shawcroft
c13ca95da1
Add MDNS support to Pico W 
This adds both cpy-MAC.local and circuitpython.local support.

Fixes #7214
 2022-11-28 16:15:28 -08:00
Scott Shawcroft
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow 
Enable* web workflow for Pico W
 2022-11-28 14:19:42 -08:00
Scott Shawcroft
30563655d7
Merge pull request #7249 from dhalbert/wifi-connect-ap-api 
correct Radio.connect() and .start_ap() signatures; clean up some code
 2022-11-23 10:29:05 -08:00
Dan Halbert
17be447c4b correct Radio.connect() and .start_ap() signatures; clean up some code 2022-11-22 17:11:03 -05:00
Dan Halbert
6d022733b3
Merge pull request #7162 from rhooper/boards-list 
add boards list to make error message
 2022-11-21 23:18:37 -05:00
Scott Shawcroft
c3a96a63c0
Enable* web workflow for Pico W 
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.

Progress on #7214
 2022-11-21 16:24:05 -08:00
Bill Sideris
b40facd0b4
Error msg changes 2022-11-22 01:00:34 +02:00
Dan Halbert
1611cf98da have clock start high in SPI mode 3 2022-11-18 18:27:38 -05:00
Bill Sideris
88bd9ef6b8
just change the ap error 2022-11-18 22:51:05 +02:00
MicroDev
c3c1717813
refactor common port specific Makefile code 2022-11-18 23:00:28 +05:30
MicroDev
e2a3597263
add awesome new make error message 
Copied from initial implementation on atmel-samd

Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
 2022-11-18 11:27:23 +05:30
Bill Sideris
b8cd6c093f
picow-ap progress 2022-11-17 21:47:39 +02:00
Bill Sideris
a234b74e87
Merge branch 'adafruit:main' into picow-ap 2022-11-16 21:32:46 +02:00
Scott Shawcroft
6689b9ad09
Merge pull request #7208 from domdfcoding/weact_pico_16mb 
Add support for the 16MB WeAct Studio Pico
 2022-11-16 09:59:37 -08:00
Jeff Epler
ef34378b1d
Merge pull request #7201 from jepler/rp2040-light-sleep 
raspberrypi: Make port_idle_until_interrupt work
 2022-11-15 17:25:48 -06:00
Jeff Epler
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug 
Fix pi cow debug compilation
 2022-11-15 14:08:44 -06:00
Bill Sideris
6954e569b7
since it ain't leaving.. 2022-11-15 00:05:01 +02:00
Bill Sideris
fde1c05e6d
Revert "remove lwip_src" 
This reverts commit 398e9122a0.
It fails on LINK without them.
 2022-11-14 20:03:41 +02:00
Bill Sideris
398e9122a0
remove lwip_src 2022-11-14 19:33:06 +02:00
Bill Sideris
6ad61a3fd1
Radio.c work 2022-11-14 19:31:18 +02:00
Bill Sideris
2e6dd1bf1f
Radio.c no longer needs ping.h 2022-11-14 18:36:42 +02:00
Jeff Epler
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings 
.. by moving it into a new weak function that can be replaced
just by the picow build.
 2022-11-14 08:44:08 -06:00
Dominic Davis-Foster
e1046b1050
Add support for the 16MB WeAct Studio Pico 2022-11-14 14:04:07 +00:00
Dan Halbert
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor 
Add ability to read VOLTAGE_MONITOR on Pico W
 2022-11-13 22:40:54 -05:00
Jeff Epler
e4d620f055
make whitespace match 2022-11-12 09:17:52 -06:00
Jeff Epler
78fc43baab
raspberrypi: Make port_idle_until_interrupt work 
This needs thorough testing before it's merged, as we tried
and reverted this once before (#5341 and #5356).

I think that besides checking for tinyusb having "something to do",
the fact that `port_interrupt_after_ticks` and `port_disable_tick`
weren't implemented that was causing a secondary problem.

I've tested this on a pico w over reboot-cycles and ctrl-c-cycles,
with and without drive automounting, with and without serial repl open,
and on a power-only connection.

I didn't notice the problem reported in #5356 after merely implementing
port_idle_until_interrupt; but I did notice that sleeps in general would
take over-long until "something" (like writing to the USB drive) happened;
I think "something" was probably calling port_enable_tick(). When this
problem was happening, sleeps would take a lot longer; for instance,
`sleep(.001)` would take about 1/20s and `sleep(.1)` would take about 1/7s.
 2022-11-12 09:16:41 -06:00
Dan Halbert
983502d6e3 ignore pin changes before sleep 2022-11-11 15:31:49 -05:00
Bill Sideris
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c 
u32_t -> uint32_t

Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
 2022-11-11 14:40:47 +02:00
Bill Sideris
0bf9df232a
fix debug 2022-11-11 14:17:57 +02:00
paul-1
11f1174658
picow: Change init to use country code routine.....place holder for future improvements to allow country code setting. 2022-11-10 17:24:09 +02:00
paul-1
851c2cd8cb
picow: Add channel setting when starting AP 2022-11-10 17:23:59 +02:00
paul-1
8fdb2df0bf
picow: enable dhcpserver for apmode. 2022-11-10 17:23:38 +02:00
Bill Sideris
25c0a0aca9
Merge branch 'adafruit:main' into picow-ap 2022-11-10 17:04:21 +02:00
Jeff Epler
7f36a365cf
delay 100us for analog voltage to stabilize 
.. otherwise, depending on the prior state of the pin as a digital
input, the value read could be 20% low.
 2022-11-08 10:43:14 -06:00
Jeff Epler
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W 
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.

Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.

Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.

```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```

Closes: #7020
 2022-11-08 09:37:15 -06:00
Jeff Epler
452ebe27ae
socketpool: make socket objects selectable 
.. which will lead to them being usable in async contexts, pending
relevant changes in asyncio
 2022-11-05 12:05:19 -05:00
Petr Sedlacek
f3ec46bbb5 Add missing pin definitions for 42. Keebs Frood 2022-11-04 15:33:16 +01:00
Jeff Epler
403a5b2681
Merge pull request #7126 from jepler/scorpio 
add feather rp2040 scorpio
 2022-11-02 14:47:40 -05:00
Dan Halbert
ded134c346 store wake_alarm in a static object 2022-10-29 16:26:36 -04:00
Dan Halbert
0221cc8df7 Merge remote-tracking branch 'adafruit/main' into alarm-lifetime 2022-10-28 14:11:32 -04:00
Dan Halbert
4e20049c38
Merge pull request #7122 from jepler/picow-ssl-server 
pico w: implement sslsocket bind, listen, accept
 2022-10-28 09:33:21 -04:00
Dan Halbert
9307b62ad5 wip 2022-10-27 22:42:04 -04:00
Dan Halbert
ca25016b52
Merge pull request #7119 from jepler/picow-reuseaddr 
Enable, use SOF_REUSEADDR
 2022-10-26 15:25:50 -04:00
Jeff Epler
7545e02a8e
add feather rp2040 scorpio 2022-10-26 10:05:37 -05:00
Jeff Epler
0cf096dda1
pico w: implement sslsocket bind, listen, accept 2022-10-25 14:46:41 -05:00
Jeff Epler
f997d0053d
Enable, use SOF_REUSEADDR 
This is the lwip no-os version of SO_REUSEADDR, which is set on all
listening sockets in the espressif port; do so here as well,
it makes running servers easier. The "address in use" error does
not occur.
 2022-10-25 10:09:16 -05:00
Petr Sedlacek
bd7f0e23d7 Adds support for the 42. Keebs Frood RP2040 board 
https://github.com/piit79/Frood
 2022-10-25 16:40:32 +02:00
Kattni Rembor
5ea8b75e17 Add STEMMA_I2C() object to Picos for Cowbells. 2022-10-24 16:27:32 -04:00
Bill Sideris
7a50beb67e
PicoW more ap work 2022-10-22 11:58:44 +03:00