Scott Shawcroft
f7a988b9b3
Merge pull request #4405 from DavePutz/issue_4237
...
Issue 4237 - Changed initial setting in program_struct
2021-03-15 17:51:36 -07:00
Scott Shawcroft
9cb8ce67ed
Merge pull request #4412 from kamtom480/spi_and_i2c
...
spresense: minor changes for i2c, spi and uart
2021-03-15 17:35:06 -07:00
Kamil Tomaszewski
ed3f636be5
spresense: empty rx uart fifo after initialization
2021-03-15 16:14:16 +01:00
Kamil Tomaszewski
22ed0abf6c
spresens: configure pin mode for i2c and spi
2021-03-15 16:14:16 +01:00
microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
root
9a83501982
Fixed initial settings for program_struct to allow more than 1 program per pio
2021-03-14 15:05:56 -05:00
Dan Halbert
8e425a9354
Merge pull request #4393 from tannewt/raise_default_flash_speed
...
Speed up a bit more
2021-03-13 12:50:29 -05:00
Scott Shawcroft
1b106de4e0
Merge pull request #4262 from DavePutz/issue_4111
...
Issue 4111 - Implement pulseio(pulsein) for RP2040
2021-03-12 16:48:57 -08:00
Scott Shawcroft
45487f14a0
Speed up a bit more
2021-03-12 16:00:16 -08:00
DavePutz
96ce43e6d6
Added the correct files
2021-03-12 16:18:33 -06:00
DavePutz
6628f49852
Use StateMachine.c interrupt setup and simplify SM program
2021-03-12 16:06:57 -06:00
Jeff Epler
a5c6759325
Merge pull request #4392 from tannewt/lower_default_flash_speed
...
Lower default flash speed.
2021-03-12 13:58:44 -06:00
Scott Shawcroft
aec03a409f
Lower default flash speed.
...
/ 6 leads to ~40mhz. 2M and 4M have a max 0x03 read speed of 60mhz.
If the divisor is / 4 then the speed is just over 60mhz.
Fixes #4377
2021-03-12 11:06:39 -08:00
Dan Halbert
0ce5b2f594
put back pullup setting
2021-03-12 08:20:09 -05:00
Dan Halbert
c71b6cb699
move to esp-idf PR merge
2021-03-11 20:05:31 -05:00
Dan Halbert
f75a009ed4
fix unnecessary statement order change
2021-03-11 15:16:32 -05:00
Dan Halbert
b5d2cc6f46
Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug
2021-03-11 15:09:18 -05:00
Jeff Epler
24f4d981bd
Merge pull request #4380 from jepler/rp2040-audiomp3
...
raspberrypi: Enable mp3 playback
2021-03-11 12:53:46 -06:00
Scott Shawcroft
0e451a1681
Merge pull request #4383 from hierophect/stm32-uart-dereserve
...
STM32: Fix UART deinit
2021-03-11 10:48:01 -08:00
Scott Shawcroft
40886d198d
Merge pull request #4385 from hierophect/stm32-f407-can
...
STM32: add all F405 modules to F407
2021-03-11 10:45:08 -08:00
Dan Halbert
de88fa37fb
Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug
2021-03-11 12:27:29 -05:00
Dan Halbert
061d5910cb
use fixed esp-idf
2021-03-11 12:09:01 -05:00
Kamil Tomaszewski
18668f6e28
spresense: fix spi to work with only one data pin
2021-03-11 18:06:49 +01:00
Kamil Tomaszewski
76d0870fba
spresense: return error as positive value for i2c
2021-03-11 18:04:01 +01:00
Lucian Copeland
0b73c7a212
Update F407 to match F405
2021-03-11 11:27:17 -05:00
Lucian Copeland
1ebbd14d0f
Fix UART deinit
2021-03-11 11:02:13 -05:00
Jeff Epler
15e97f12a1
Merge pull request #4379 from jepler/rp2040-rtc
...
raspberrypi: RTC: Ensure a time is set
2021-03-11 09:00:31 -06:00
Jeff Epler
16bfe3b41c
raspberrypi: RTC: Ensure a time is set
...
Until a time is set, the RTC is not running, and rtc_get_datetime()
returns false without assigning to the out-parameter.
In CircuitPython, this would manifest as arbitrary values being returned,
since uninitialized storage on the stack was being converted into a timestamp.
2021-03-10 20:20:40 -06:00
Scott Shawcroft
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840
...
Add new nRF port for SF MicroMod nRF52840.
2021-03-10 18:13:11 -08:00
Jeff Epler
c95def0b32
raspberrypi: Enable mp3 playback
...
The rp2040 is _very_ marginal for mp3 playback, and currently sometimes triggers a bug that gives garbled audio output. However, it does work for some limited situations.
2021-03-10 18:44:10 -06:00
hathach
58fb011070
clean up
2021-03-10 19:03:27 +07:00
hathach
d1c6bb0927
rp2040 add double reset to uf2, also update pico-sdk to 1.1.0
2021-03-10 18:58:23 +07:00
DavePutz
a3c3e8a0fa
fix trailing whitespace
2021-03-09 22:41:08 -06:00
nitz
d5365cb066
SDIO/QSPI pin names. ¯\_(ツ)_/¯
2021-03-09 18:36:29 -05:00
nitz
5beb529f61
Update pins, remove unused defs from board config.
2021-03-09 17:43:13 -05:00
nitz
fe0655e121
Update pins, remove unused defs from board config.
2021-03-09 17:39:50 -05:00
DavePutz
0c58cc4772
Moved pin wait to an initial exec
2021-03-09 16:37:29 -06:00
nitz
1ae858126a
Fix the mpconfigboard.mk that was screwy?
2021-03-09 17:29:10 -05:00
Scott Shawcroft
d650849581
Merge pull request #4348 from FBSeletronica/franzininhoWIFI_wrover
...
Franzininho wifi ESP32-S2 Wrover
2021-03-09 13:07:19 -08:00
Scott Shawcroft
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc
...
I2CPeripheral samd51 corrections in the CTRLC bit
2021-03-09 12:58:59 -08:00
Chris Dailey
a61db7f12e
Updated SparkFun MicroMod USB PID
...
As per the PID provide by TheHoff, [here](https://forum.sparkfun.com/viewtopic.php?p=223812#p223812 )
2021-03-09 12:54:52 -05:00
DavePutz
f0e3274a33
Update to agree with modified StateMachine.h
2021-03-09 11:13:09 -06:00
FBSeletronica
c6eb3f98be
Fixing build.yml
2021-03-09 13:55:20 -03:00
jposada202020
be90fa80e8
Initial Changes
2021-03-09 10:48:33 -05:00
DavePutz
6f4510d7aa
Merge branch 'main' into issue_4111
2021-03-08 23:28:21 -06:00
root
576da73a17
Added check for maxlen
2021-03-08 23:23:51 -06:00
root
95b7a59156
Merge branch 'issue_4111' of https://github.com/DavePutz/circuitpython into issue_4111
2021-03-08 23:22:05 -06:00
root
3db0fec267
Added check for maxlen
2021-03-08 23:20:57 -06:00
DavePutz
88650bc4d0
Removed leftover debug code
2021-03-08 22:48:57 -06:00
Scott Shawcroft
775f1b9e0d
Merge pull request #4329 from jepler/rp2-rotaryio
...
raspberrypi: Implement rotaryio, improve StateMachine
2021-03-08 17:49:45 -08:00
