d84c69c056
Add NeoPixel Library for Datanoise PicoADK.
2023-07-23 12:14:13 -04:00
a4b4f57ff1
Add Datanoise PicoADK
2023-07-23 12:07:30 -04:00
b87ceb26aa
Add Datanoise PicoADK
2023-07-23 12:07:30 -04:00
df821bf22c
Update 42. Keebs Frood support for Rev7
2023-07-23 11:59:49 -04:00
317cab87a7
Add new board: splitkb.com's Liatris
2023-07-23 11:57:44 -04:00
b6d4488b31
fix set hostname
2023-07-23 11:56:05 -04:00
9a9fe1240d
update metro rp2040 to work with 16MB flash
2023-07-23 10:05:54 -04:00
391bb1c45f
Add Adafruit Metro RP2040
2023-07-23 10:00:56 -04:00
5f082561b3
Unify some error strings
2023-07-20 11:20:32 -07:00
1629faf8b3
Make usb_host.Port a singleton
...
This allows you to initialize usb_host.Port once successfully and
then returns the same object as long as you pass the same arguments
in. It does allow you to fix incorrect pins but not switching from
one valid set to another. (It needs a reset for that.)
This also moves hcd cache operations to RAM so that they don't
access the cache when doing maintenance.
2023-07-18 10:40:54 -07:00
4f09078293
update metro rp2040 to work with 16MB flash
2023-07-17 12:56:55 -05:00
4e01674cbd
Fix rp2 safe mode via reset press
...
The picodvi PR #7880 switched the saved word to the watchdog
register since it reworked the RAM layout. This works for
reset_into_safe_mode because the watchdog scratch registers are
preserved by soft resets. They *aren't* preserved for pressing the
reset button. So it broken manual safe mode. Switch back to using
RAM to store the saved word but use the pico-sdks "uninitialized"
designation instead of a fixed location.
Also fixes USB host feather status neopixel by setting the power
pin.
2023-07-13 14:49:08 -07:00
3ac84281bf
Add NeoPixel Library for Datanoise PicoADK.
2023-07-13 12:04:27 +02:00
6b5cf5537a
Merge pull request #8035 from dhalbert/metro-rp2040
...
Add Adafruit Metro RP2040
2023-07-12 10:40:37 -05:00
346ec8d4a8
Merge pull request #8156 from DatanoiseTV/datanoise_picoadk
...
Add Datanoise PicoADK Board
2023-07-11 11:01:28 -07:00
7764cde6c2
Merge pull request #8155 from tannewt/imx_usb_host
...
Basic USB host support and keyboard workflow
2023-07-11 09:50:09 -07:00
9b80943885
Add Datanoise PicoADK
2023-07-11 10:01:46 +02:00
449416f5e1
Add Datanoise PicoADK
2023-07-11 09:52:47 +02:00
52ca0504d9
Comment out debug UART on RP2040 USB host feather
2023-07-10 15:37:57 -07:00
ae84441575
Update 42. Keebs Frood support for Rev7
2023-07-10 23:32:02 +02:00
2686beab36
Basic USB host support and keyboard workflow
...
Connects up read, write and ctrl_transfer to TinyUSB. USB Host
support is available on iMX RT and RP2040.
Fixes #6527 (imx) and fixes #5986 (rp2).
2023-07-10 14:22:21 -07:00
9f3f2aabff
Merge pull request #8152 from splitkb/liatris
...
Add new board: splitkb.com's Liatris
2023-07-10 12:07:27 -07:00
036eca8123
Add new board: splitkb.com's Liatris
2023-07-10 14:45:08 +02:00
8704ba158b
fix set hostname
2023-07-09 21:25:37 +05:30
385366128f
Don't use "cookie" variable/function name
2023-06-27 09:59:02 -05:00
b4be2317cb
rp2040: Avoid screeches due to audio underflow during flash writes
...
By pausing audio during flash writes, the worst screeching of #8121
is avoided. I don't consider this a full fix, but it greatly improves
the by far most common scenario in which the problem occurs.
Tested on rp2040 prop feather with a midi synth playing arpeggios. When
writing to the flash e.g., with
```
dd bs=512 count=32 if=/dev/zero of=/media/jepler/CIRCUITPY/boop
```
the audio goes "tap tap tap tap" during the flash write instead of the
squawking.
This isn't a 100% fix; it will still glitch out, including during USB
enumeration which must be taking a long time without servicing background
tasks. Add a delay if not usb-connected at startup ameliorates this
greatly.
2023-06-26 10:34:29 -05:00
540bf58102
improve start_ap() doc; make "authmode" use consistent internally
2023-06-22 16:24:18 -04:00
112f0fd767
Add `-Wno-undef` to rp2 makefile for sdk
2023-06-21 01:43:10 +03:00
e139cd9ec0
Update cyw43 to 1.0.1
2023-06-21 01:35:52 +03:00
0aa7854d5b
Update pico-sdk to 1.5.1
2023-06-19 18:00:49 +03:00
1e3f1d745a
Update badger2040 start sequence for more contrast
...
This change is taken from the pico-sdk: https://github.com/pimoroni/pimoroni-pico/blob/main/drivers/uc8151_legacy/uc8151_legacy.cpp#L67-L120 and increases the contrast of pictures sent dramatically. It comes with the expense of using way more time when updating though.
2023-06-08 18:25:45 +02:00
38f6fa27e3
fetch-port-submodules; fetch-all-submodules
2023-06-05 17:23:34 -04:00
3a893594b2
Add Adafruit Metro RP2040
2023-05-26 12:42:23 -04:00
2d7fa6dd8a
Update pins.c
...
Fixed Button_R from GPIO6 to GPIO7
Fixed LCD_BACKLIGHT from GPIO29 to GPIO26
2023-05-24 08:44:57 +07:00
3f7e6db4fa
Merge pull request #8015 from dhalbert/rp2040-sleep-memory
...
RP2040 SleepMemory
2023-05-22 13:08:37 -07:00
955d2723d0
RP2040 SleepMemory
2023-05-21 19:05:25 -04:00
a4a4bdfeb0
Update board.c
...
Change column start from 52 to 53 to fix a line at the top of the display.
2023-05-20 18:33:37 -07:00
f2bfced407
Merge pull request #7976 from anecdata/ap_ipv4_picow
...
Allow Access Point static IPv4 on the raspberrypi port
2023-05-16 18:45:22 -04:00
d945d8b6e0
Merge pull request #7988 from Neradoc/add-feather-rp2040-button-pin
...
Add the Feather RP2040 boot button to the board module ?
2023-05-16 18:41:15 -04:00
ab83c98c1d
Merge pull request #7982 from bill88t/picow-stop-ap
...
Await `CYW43_LINK_DOWN` in `stop_station`
2023-05-16 12:31:46 -04:00
95c1d849d3
Just 500
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2023-05-16 04:47:44 +03:00
ed31c7dc8f
Await down on stop_station
2023-05-15 22:38:59 +03:00
4ac7e7643a
netutils dhcp server
2023-05-14 17:44:27 -05:00
6dd2e86727
remove dhcp calls
2023-05-14 14:52:49 -05:00
cd41fb101a
oops
2023-05-13 22:55:08 -05:00
8196366c94
initial
2023-05-13 22:06:16 -05:00
16c8c9a739
Add the Feather RP2040 button to the board module
2023-05-13 22:13:47 +02:00
91380f1957
Update to use new display construct.
2023-05-12 22:28:11 -07:00
22665a113d
Merge branch 'adafruit:main' into lilygo_t_display_rp2040
2023-05-12 22:02:16 -07:00
49a5518bd3
Attempt to fix build error
2023-05-12 18:19:49 -07:00
285131a87a
Update typo on pin GP2
2023-05-12 18:04:07 -07:00
8a3dc92920
Update with the official VID/PID for CircuitPython
2023-05-12 17:45:33 -07:00
827eaeb1f9
Merge pull request #7962 from tannewt/inky_frame_5_7
...
Add Pimoroni Inky Frame 5.7
2023-05-12 18:22:42 -04:00
db8bd56c6c
Merge pull request #7946 from anecdata/ap_ipv4
...
Allow Access Point static IPv4 on the espressif port
2023-05-12 08:47:07 -07:00
cbfb2d0f55
Add Pimoroni Inky Frame 5.7
...
Tweak DTCM and ITCM loading and prevent epd refresh while waiting
for autoreload.
2023-05-11 12:12:34 -07:00
55d8f0db4e
Add board.DISPLAY to hack_club_sprig
2023-05-10 11:24:26 -07:00
29bf64decb
raspberrypi common-hal f(x)s Not Implemented
2023-05-08 22:41:33 -05:00
9e4dea7b15
Merge pull request #7933 from jepler/synthio-note
...
synthio: add 'Note' with arbitrary frequency and more
2023-05-08 13:32:37 -07:00
fa9b59d14c
Merge pull request #7915 from RetiredWizard/picodvi
...
Add Pimoroni Pico dv Demo Base (pico only)
2023-05-04 10:07:48 -07:00
a388a59543
rp2040: fix audio glitch at soft-reload
...
The internal flash cache wasn't being properly used, because
`write_blocks` unconditionally performed the flash write.
Fixing this so that the write's not done until `internal_flash_flush`
fixes the problem in my test program with i2sout & synthio.
as a future optimization, `flash_read_blocks` could learn to read out
of the cache, but that's probably not super important.
2023-05-04 08:41:23 -05:00
4f7d88676b
Remove pico-w version
2023-05-03 17:30:01 -04:00
480c4f1081
Update pins.c
2023-05-02 17:27:53 -04:00
facd3a4e78
Updating directory name
2023-05-02 17:07:49 -04:00
cba7a812fc
Minor update for Feather RP2040 ThinkInk
...
hihi - updating board name from EPD to ThinkInk and adding pin def for board.BUTTON
2023-05-02 17:02:59 -04:00
750615f2da
Merge pull request #7430 from Lanzaa/rp2040_cpu_frequency
...
Add frequency setting for RP2040 boards.
2023-05-02 09:52:28 -07:00
488dca565f
Merge pull request #7922 from tannewt/dvi320
...
Take in framebuffer resolution, not output res
2023-05-02 09:22:51 -07:00
80e1418c01
Merge pull request #7921 from tannewt/imx_evks
...
Add additional iMX RT support
2023-05-02 07:09:50 -05:00
0aa71ed6e6
Tweak the picodvi docs and arg checking
2023-05-01 11:30:04 -07:00
b08714bb8f
Take in framebuffer resolution, not output res
...
Fixes #7911
2023-04-28 17:13:17 -07:00
1a4e1d114c
Merge pull request #7916 from bablokb/badger_2040_w
...
Add support for Pimoroni Badger2040W
2023-04-28 16:42:03 -07:00
8104b824e0
Standardize CPU temp and voltage. Add autogen warning
2023-04-28 16:19:43 -07:00
1fb6d4d77e
I2S pin names per Dan's suggestions on iMX PR
2023-04-28 16:58:39 -04:00
14c17224a1
update product-id
2023-04-28 08:57:22 +02:00
4f8ae14c18
update to upstream version
2023-04-28 08:56:52 +02:00
a86c5f7310
Merge branch 'main' into plasma2040w
2023-04-28 08:41:02 +02:00
ec6fde91ad
integrate latest changes from upstream
2023-04-27 18:14:46 +02:00
cc3d61eb49
fixed merge conflicts
2023-04-27 13:23:34 +02:00
12f59b4948
pre-commit formatting
2023-04-26 21:14:57 -04:00
aba4c50e74
Add adafruit_sdcard as frozen library
2023-04-26 21:08:28 -04:00
5d0c37f198
Rename folders and add VID/PID from Pimoroni
2023-04-26 17:45:59 -04:00
4214f2bb77
Rename ports/raspberrypi/boards/pimoroni_pico_dv to ports/raspberrypi/boards/pimoroni_pico_dv_base
2023-04-26 11:01:56 -04:00
34f565dd89
Merge pull request #7891 from tannewt/fix_epd_uc
...
Add address_little_endian and fix display memory reuse
2023-04-26 00:27:59 -04:00
be6e90c0ed
Merge pull request #7877 from dhalbert/rp2040-propmaker
...
Add Adafruit Feather RP2040 Prop-Maker
2023-04-26 00:23:49 -04:00
95acec0f55
Improve pin names
2023-04-25 13:22:42 -04:00
2bee4926f9
Fix Scorpio on-board neopixel pin
2023-04-25 17:22:04 +02:00
076cd1fab4
Nope, can't use the COSMO-pico vid/pid pair
...
Setting back, at least temporarily to the Adafruit pair.
2023-04-25 11:14:48 -04:00
361608119c
Change VID/PID to be Raspberry Pi values
...
Spotted the Cosmo_pico port on circuitpython.org which is the same class of device as the Pimoroni PICO dv so I'm switching the VID/PID to use the Raspberry Pi owned values rather than the Adafruit values just as the Como device uses.
2023-04-25 10:33:13 -04:00
2b95fc3029
Merge pull request #7893 from tannewt/fix_rp2040_idle
...
Fix RP2040 idle
2023-04-24 13:53:12 -04:00
b9c7cd4028
describe instance more precisely
2023-04-24 12:58:40 -04:00
6aa3e7d8a6
This is about picodvi not rgbmatrix
...
There might be another way or other place where the documentation does not match the code.
But this is the most obvious, that's why I found it.
2023-04-23 10:58:02 +02:00
b59f0e17be
Fix RP2040 idle
...
Don't idle from main if we scheduled an interrupt for 0 ticks in
the future.
Have RP2040 detect wakes that happen between setting the timer and
the idle call.
Fixes #7361
2023-04-21 16:04:23 -07:00
b16037859c
Fix native epd boards
2023-04-21 14:36:35 -07:00
d5b747b305
Fix board inits
2023-04-21 13:23:01 -07:00
b3c8575b81
Update for Pimoroni Pico dv pins/connectors
2023-04-20 21:22:39 -04:00
0f9fb33371
Merge branch 'main' into rp2040_cpu_frequency
2023-04-19 17:05:58 -07:00
e2ab7a4751
Change voltage. Refine docs
2023-04-19 17:04:54 -07:00
13bb801211
Fix docs and windows
2023-04-19 15:42:02 -07:00
66edcf5d03
Add PicoDVI support
...
PicoDVI in CP support 640x480 and 800x480 on Feather DVI, Pico and
Pico W. 1 and 2 bit grayscale are full resolution. 8 and 16 bit
color are half resolution.
Memory layout is modified to give the top most 4k of ram to the
second core. Its MPU is used to prevent flash access after startup.
The port saved word is moved to a watchdog scratch register so that
it doesn't get overwritten by other things in RAM.
Right align status bar and scroll area. This normally gives a few
pixels of padding on the left hand side and improves the odds it is
readable in a case. Fixes #7562
Fixes c stack checking. The length was correct but the top was being
set to the current stack pointer instead of the correct top.
Fixes #7643
This makes Bitmap subscr raise IndexError instead of ValueError
when the index arguments are wrong.
2023-04-19 15:14:02 -07:00
7567082965
Add Adafruit Feather RP2040 Prop-Maker
2023-04-18 15:52:06 -04:00
2a49567ec6
added Adafruit_CircuitPython_Register to frozen libs
2023-04-17 19:03:42 +02:00
Sylwester
Petr Sedlacek
Leah Post
MicroDev
Jeff Epler
Dan Halbert
Scott Shawcroft
Bill Sideris
Mario Bodemann
phamhuyvn
rcarteraz
Dan Halbert
anecdata
Neradoc
Eric Rong
Alex Sirota
RetiredWizard
Liz
Bernhard Bablok
David Glaude