1ccf767112
Merge branch 'adafruit:main' into motor
2022-04-26 10:23:14 +01:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
1a89a2d366
fix doc build
2022-04-23 13:25:59 -05:00
989fb828d4
Revamp background writing
...
Now a 'once' and a 'loop' buffer can be specified.
'once' is useful for things like writing a neopixel strip in the background,
if you can guarantee the buffer contents are stable until the write is complete.
'loop' is useful for periodic things, like pwm & servos.
both together are useful for some special cases of pwm/servo, where a
transitional waveform needs to be played for one repetition and then
a new waveform needs to be played after that.
The API is renamed to reflect that it's a more generic 'background'
operation.
2022-04-23 13:09:36 -05:00
e8541e866c
fix end of file issue
2022-04-22 15:02:50 +09:00
28296f98f8
update pid
2022-04-22 14:59:28 +09:00
f91be019f6
Merge branch 'adafruit:main' into w5100s-evb-pico
2022-04-22 14:52:04 +09:00
457aba79f4
fix doc build
2022-04-20 08:09:38 -05:00
144eb5dfd4
fix lost DMA IRQ
2022-04-19 16:42:27 -05:00
ebc426d9e6
Remove debug prints, improve docs
2022-04-19 16:39:04 -05:00
b128f180ca
switch to single single dma channel, fix some bugs
2022-04-19 16:33:51 -05:00
33d6d55675
the basics work
...
the sequence has to be a minimum length, 8 entries, but this problem
is not detected. I don't THINK this is an insurmountable problem.
2022-04-19 15:14:50 -05:00
33f5598acc
Stub 'continuous write' functionality
2022-04-19 11:35:43 -05:00
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
9c1b44a030
Modify USB VID and PID of the Pico:ed
2022-04-14 17:42:04 +08:00
b30d2e0889
update w5100s-evb-pico mpconfigboard.h
2022-04-14 14:35:23 +09:00
8cce2e6406
Updated motor pin names
2022-04-12 15:20:28 +01:00
71a7ec6f76
Add ELECFREAKS Pico:ed board.
2022-04-12 16:10:02 +08:00
01cff3c4f8
add MIDI to frozen libs
2022-04-10 14:10:07 -04:00
f7be4345d9
Merge remote-tracking branch 'origin/main' into floppy
2022-04-07 08:37:46 -05:00
769b182da4
Added definition for upcoming Pimoroni motor board
2022-04-07 07:24:55 +01:00
1a329cfd11
Merge pull request #6029 from jepler/pio-wrap
...
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-04-06 11:55:02 -04:00
76efdfd9a6
initial commit for w5100s-evb-pico
2022-04-06 14:52:28 +09:00
fe98248a3d
Merge remote-tracking branch 'origin/7.2.x' into merge-7.2.x
2022-04-05 08:45:13 -05:00
4cccc1a036
handle clearing both RXIC and RTIC interrupts
2022-04-04 23:55:08 -04:00
f059f7180c
Merge pull request #6208 from ZodiusInfuser/badger
...
Improvement to Badger 2040 operation on battery
2022-03-30 13:35:47 -04:00
336abdfbc7
Switch variable to extern
2022-03-30 17:44:36 +01:00
dd933c7d06
add NeoPixel lib to firmware
2022-03-30 09:17:26 -04:00
f07cfdd80c
Linting fixes
2022-03-28 18:34:39 +01:00
c2fb44b36c
Set enable pin to high during boot
2022-03-28 15:56:02 +01:00
b44a2a0c8e
Updated pin name to match schematic
2022-03-28 14:07:08 +01:00
8e98be2704
Added additional constants
2022-03-24 18:32:39 +00:00
9c81ea86e9
Added board definition for upcoming Pimoroni servo driver.
2022-03-24 16:07:04 +00:00
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
fd17ba6d91
Merge pull request #6143 from ZodiusInfuser/badger
...
Added built-in display bringup for Badger2040
2022-03-15 13:28:00 -07:00
c919e9c2cc
fix duplicate reference names for DSN export
2022-03-14 21:02:14 -04:00
af2862ead9
Removed trailing whitespace
2022-03-14 22:28:28 +00:00
a778469082
Inverted the display pixels to match the expected CPY behaviour
2022-03-14 11:12:03 +00:00
f13d218749
Merge pull request #6125 from tannewt/usb_host
...
Start of USB host API
2022-03-11 21:41:28 -05:00
eab5f00548
Added built-in display bringup for Badger2040
2022-03-11 20:10:42 +00:00
e4cd9690f1
rework auto-reload delay logic
2022-03-11 14:03:04 -05:00
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional
...
paralleldisplay: reset and read pins should be optional
2022-03-08 09:34:25 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
236ebba0ca
melopero_shake_rp2040: Add missing BOARD_DICT_STANDARD_ITEMS
2022-03-08 08:58:32 +11:00
b69a06b2ed
Also fix the read pin in the atmel and rp2040 ports
2022-03-06 11:33:07 +01:00
d66cf1d8ef
Name fix
2022-02-21 11:26:43 +00:00
d0bbaddcb3
Board definitions for upcoming EInk board
2022-02-21 11:23:55 +00:00
729fcf749e
Fix doc markup
2022-02-15 16:03:52 -06:00
a58bf235d8
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-02-13 16:38:53 -06:00
22928fec55
Explain read and write size to/from PIO FIFOs
2022-02-10 10:55:04 -08:00
da035fe958
Merge pull request #5990 from sgauche/stm_spi_3wire
...
Add support for half-duplex SPI to CPy
2022-02-09 13:11:37 -05:00
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
ce191327e8
RP2040 PDMIn frequency based on sample rate
2022-02-08 10:10:02 -06:00
1c17dc9348
ports/raspberrypi/common-hal/busio/SPI.c
2022-02-07 17:07:47 -05:00
566f8bed99
Merge pull request #5984 from DavePutz/issue_5967
...
Correcting order of sideset parameters in function call
2022-02-05 21:58:30 -05:00
8c10148b21
Correcting order of sideset parameters in function call
2022-02-05 16:15:12 -06:00
07e710b0a0
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:01:36 -06:00
6a7742ba88
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:00:32 -06:00
749bb99863
bump pico-sdk to 1.3.0
2022-02-02 17:15:33 -06:00
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
bf57f3606a
rp2pio: Add pull up/down support for the "jmp pin"
...
This is needed so that the floppy flux reader can enable the pull up
on the index pin while using it as a pio jmp pin.
Also fixes a doc bug where the `jmp_pin` was omitted in one spot in the docs.
2022-02-01 10:19:17 -06:00
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
5933c04499
Merge pull request #5899 from tannewt/rp2040_winbond
...
Add winbond to Feather RP2040
2022-01-21 16:44:52 -05:00
c598ede84e
Add winbond to Feather RP2040
2022-01-21 10:34:38 -08:00
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
8e895e1986
Add floppyio for rp2040
...
Tested on RP2040 Feather with a 3.5" Prodigy diskette, the whole
surface reads 100% across 3+ trials.
2022-01-17 16:34:47 -06:00
784a5edc4b
Define default SPI pins on kb2040
...
Fixes #5875
2022-01-17 06:52:08 +01:00
db5f99c63e
Add a function to get low level register access
...
The port is free to return NULL for any/all of these, and the caller has
to check.
This will be used in the floppy code, because aside from getting the
registers, it looks like all is independent of MCU.
2022-01-13 15:29:03 -06:00
ae58858036
Merge pull request #5820 from CharString/waveshare_rp2040_zero
...
Waveshare RP2040-Zero board definition
2022-01-12 10:56:55 -08:00
8226fb8e0b
Bring pins in line with board documentation.
...
This brings the pins in line with the documented [pinouts]. The only
"special" pins:
- GP0, GP1 are mentioned as the default UART, so we init them as
such and give them the TX and RX alternative names.
- GP16 is connected to the onboard neopixel DIN line and we assign it
the NEOPIXEL name. (Power of the neopixel is connected to the 3.3V
rail, not a pin. See [schematic].)
- GP26, GP27, GP28, GP29 have unambiguous ADC designations in the
[pinouts], so we assign the `A` analogue names as the Pico board
definition does.
[pinouts]: https://www.waveshare.com/wiki/RP2040-Zero#Pinouts
[schematic]: https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
2022-01-12 12:27:54 +01:00
9b825869c5
raspberrypi : Check UART before claiming pins, claim it after
...
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
2022-01-11 22:02:47 +01:00
2251d0f4b0
raspberrypi: Claim UART after checking pins
...
If, for some reason, you mix up TX and RX when calling `busio.UART` (who would do that ;) ), you get `Invalid pins`. When you go to try again, you'll get `All UART peripherals are in use` because the interface was claimed as busy before pins are verified. This should fix that issue.
2022-01-11 15:13:36 +01:00
e23b272595
Added missing LDO control pin (SARA_PWR)
2022-01-08 16:39:48 +01:00
783106545c
Remove LED pin.
...
There's just the NEOPIXEL on this board, no other LED.
2022-01-07 23:25:50 +01:00
d8f18d36a4
Initial Waveshare RP2040-Zero board definition
...
`board.NEOPIXEL` works. Once you have an LED cycling colours, you're 99%
done. :-)
2022-01-07 23:20:10 +01:00
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
8aafc734a4
Merge pull request #5789 from adafruit/7.1.x
...
Merge latest changes from 7.1.x
2021-12-28 18:12:29 -05:00
08d09ac493
Merge pull request #5613 from jepler/issue5418
...
clear out interrupt when freeing the timer
2021-12-28 10:57:58 -08:00
3bc48802b1
Merge pull request #5783 from jepler/longint-config
...
Centralize LONGINT_IMPL handling
2021-12-28 12:55:26 -05:00
1986d2ee71
clear out interrupt flags when disabling timer too
2021-12-27 16:42:41 -06:00
f5fa4ae237
Merge pull request #5764 from dannystaple/patch-1
...
Fix RST formatting for readthedocs
2021-12-27 09:41:46 -07:00
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
c1236fb4d6
Merge pull request #5766 from tannewt/rp2040_sideset_enable
...
Add sideset_enable support to PIO
2021-12-22 20:17:33 -07:00
827ad327a5
Only ignore warnings if in gcc >= 11
2021-12-22 18:21:18 -08:00
674c845fb6
Merge pull request #5760 from jepler/rename_under_typing
...
circuitpython_stubs: Use `circuitpython_typing` for cp-specific typing
2021-12-22 14:05:04 -08:00
3e13d4f5b5
Add sideset_enable support to PIO
...
This allows for UART TX via PIO
2021-12-22 12:00:19 -08:00
166793f843
circuitpython_stubs: Use `circuitpython_typing` for cp-specific typing
...
Installing stubs for a module named `_typing` seems like a dubious
decision.
2021-12-22 11:14:21 -06:00
174a2cbf25
Fix RST formatting for readthedocs
...
And also a typo/grammar thing.
2021-12-22 17:03:58 +00:00
7c2e7bfeaa
Add alternative clock pin name to match silkscreen
2021-12-15 14:41:42 -08:00
f3ec6ee760
tested hardware and cleaned-up commented out pin defs
2021-12-14 21:46:04 -06:00
162e253949
finalizing pin assignments prior to final hardware test
2021-12-14 09:45:39 -06:00
9119a32a5d
fixed row0 and added encoder pins
2021-12-13 13:31:00 -06:00
5939c11406
add secondary i2c singleton on adafruit_qtpy_rp2040
2021-12-11 23:14:22 +05:30
86ddecfd4f
merge main and resolve conflict
2021-12-10 16:57:50 -06:00
dac71e684d
moved aliased boards down to actual builds
2021-12-10 16:34:06 -06:00
a043f65352
adding Pykey family of boards
2021-12-09 23:25:48 -06:00
ZodiusInfuser
Dan Halbert
Jeff Epler
ViktorWiz
Neradoc
Xu Hao
BigTuna94
Dan Halbert
ViktorWiz
Scott Shawcroft
Michael Himing
Radomir Dopieralski
Scott Gauche
root
microDev
Neradoc
Scott Shawcroft
Chris Wesseling
arturo182
Pontus Oldberg
Chris Wesseling
Jeff Epler
Danny Staple
Pierre Constantineau