Commit Graph

40 Commits

Author SHA1 Message Date
Jim Mussared 45ac651d1a all: Rename *umodule*.c to remove the "u" prefix.
Updates any includes, and references from Makefiles/CMake.

This essentially reverts what was done long ago in commit
136b5cbd76

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:17 +10:00
Damien George b1229efbd1 all: Fix spelling mistakes based on codespell check.
Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 18:03:06 +10:00
Damien George 4f3780a156 examples/embedding: Rework example to use ports/embed.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-20 22:28:50 +11:00
Jim Mussared 17f2783e4a all: Use += rather than = everywhere for CFLAGS/LDFLAGS/LIBS.
This avoids a surprise where an = can cancel out an earlier +=.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-10-11 23:17:41 +11:00
Damien George 8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Daniel Jour 47c84286e8 all: Fix paths to mpy-cross and micropython binaries.
Binaries built using the Make build system now no longer appear in the
working directory of the build, but rather in the build directory.  Thus
some paths had to be adjusted.
2022-08-11 13:31:13 +10:00
Damien George 5e20dcf925 examples/embedding: Remove obsolete axtls build target.
axtls is now built as part of the standard make process, using rules in
extmod/extmod.mk.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 23:00:51 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George 5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George b083cdba2b examples/embedding: Fix build with updated sys and os modules.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-25 11:47:30 +11:00
Jim Mussared b326edf68c all: Remove MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE.
This commit removes all parts of code associated with the existing
MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE optimisation option, including the
-mcache-lookup-bc option to mpy-cross.

This feature originally provided a significant performance boost for Unix,
but wasn't able to be enabled for MCU targets (due to frozen bytecode), and
added significant extra complexity to generating and distributing .mpy
files.

The equivalent performance gain is now provided by the combination of
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE (which has
been enabled on the unix port in the previous commit).

It's hard to provide precise performance numbers, but tests have been run
on a wide variety of architectures (x86-64, ARM Cortex, Aarch64, RISC-V,
xtensa) and they all generally agree on the qualitative improvements seen
by the combination of MICROPY_OPT_LOAD_ATTR_FAST_PATH and
MICROPY_OPT_MAP_LOOKUP_CACHE.

For example, on a "quiet" Linux x64 environment (i3-5010U @ 2.10GHz) the
change from CACHE_MAP_LOOKUP_IN_BYTECODE, to LOAD_ATTR_FAST_PATH combined
with MAP_LOOKUP_CACHE is:

diff of scores (higher is better)
N=2000 M=2000       bccache -> attrmapcache      diff      diff% (error%)
bm_chaos.py        13742.56 ->   13905.67 :   +163.11 =  +1.187% (+/-3.75%)
bm_fannkuch.py        60.13 ->      61.34 :     +1.21 =  +2.012% (+/-2.11%)
bm_fft.py         113083.20 ->  114793.68 :  +1710.48 =  +1.513% (+/-1.57%)
bm_float.py       256552.80 ->  243908.29 : -12644.51 =  -4.929% (+/-1.90%)
bm_hexiom.py         521.93 ->     625.41 :   +103.48 = +19.826% (+/-0.40%)
bm_nqueens.py     197544.25 ->  217713.12 : +20168.87 = +10.210% (+/-3.01%)
bm_pidigits.py      8072.98 ->    8198.75 :   +125.77 =  +1.558% (+/-3.22%)
misc_aes.py        17283.45 ->   16480.52 :   -802.93 =  -4.646% (+/-0.82%)
misc_mandel.py     99083.99 ->  128939.84 : +29855.85 = +30.132% (+/-5.88%)
misc_pystone.py    83860.10 ->   82592.56 :  -1267.54 =  -1.511% (+/-2.27%)
misc_raytrace.py   21490.40 ->   22227.23 :   +736.83 =  +3.429% (+/-1.88%)

This shows that the new optimisations are at least as good as the existing
inline-bytecode-caching, and are sometimes much better (because the new
ones apply caching to a wider variety of map lookups).

The new optimisations can also benefit code generated by the native
emitter, because they apply to the runtime rather than the generated code.
The improvement for the native emitter when LOAD_ATTR_FAST_PATH and
MAP_LOOKUP_CACHE are enabled is (same Linux environment as above):

diff of scores (higher is better)
N=2000 M=2000        native -> nat-attrmapcache  diff      diff% (error%)
bm_chaos.py        14130.62 ->   15464.68 :  +1334.06 =  +9.441% (+/-7.11%)
bm_fannkuch.py        74.96 ->      76.16 :     +1.20 =  +1.601% (+/-1.80%)
bm_fft.py         166682.99 ->  168221.86 :  +1538.87 =  +0.923% (+/-4.20%)
bm_float.py       233415.23 ->  265524.90 : +32109.67 = +13.756% (+/-2.57%)
bm_hexiom.py         628.59 ->     734.17 :   +105.58 = +16.796% (+/-1.39%)
bm_nqueens.py     225418.44 ->  232926.45 :  +7508.01 =  +3.331% (+/-3.10%)
bm_pidigits.py      6322.00 ->    6379.52 :    +57.52 =  +0.910% (+/-5.62%)
misc_aes.py        20670.10 ->   27223.18 :  +6553.08 = +31.703% (+/-1.56%)
misc_mandel.py    138221.11 ->  152014.01 : +13792.90 =  +9.979% (+/-2.46%)
misc_pystone.py    85032.14 ->  105681.44 : +20649.30 = +24.284% (+/-2.25%)
misc_raytrace.py   19800.01 ->   23350.73 :  +3550.72 = +17.933% (+/-2.79%)

In summary, compared to MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE, the new
MICROPY_OPT_LOAD_ATTR_FAST_PATH and MICROPY_OPT_MAP_LOOKUP_CACHE options:
- are simpler;
- take less code size;
- are faster (generally);
- work with code generated by the native emitter;
- can be used on embedded targets with a small and constant RAM overhead;
- allow the same .mpy bytecode to run on all targets.

See #7680 for further discussion.  And see also #7653 for a discussion
about simplifying mpy-cross options.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-09-16 16:04:03 +10:00
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Santeri Paavolainen 42035e5ede examples/embedding: Fix example so it compiles again.
There were a few changes that had broken this example, specifically
2cdf1d25f5 removed file.c from ports/unix.
And (at least for MacOS) mp_state_ctx must be placed in the BSS with
-fno-common so it is visible to the linker.

Signed-off-by: Santeri Paavolainen <santtu@iki.fi>
2021-04-09 15:47:54 +10:00
Damien George ad4656b861 all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture.  So rename this config value to better reflect what it
measures, and also prefix it with MP_.

For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
Damien George 5c8bf12acf all: Fix auto-enable of MICROPY_GCREGS_SETJMP to select GC behaviour.
Only enable it if MICROPY_GCREGS_SETJMP is not already defined, and no
supported architecture is defined.
2020-04-30 16:49:42 +10:00
Jim Mussared 710426024a all: Factor gchelper code to one place and use it for unix & ARM ports.
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port.  This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.

Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.

The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
2020-04-29 23:45:19 +10:00
Damien George 1266ba9754 examples/embedding: Remove obsolete fatfs files from build. 2019-11-11 11:37:32 +11:00
Damien George a8138b75b1 examples/embedding: Replace symlink of mpconfigport.h with real file. 2019-10-29 22:53:34 +11:00
Damien George af20c2ead3 py: Add global default_emit_opt variable to make emit kind persistent.
mp_compile no longer takes an emit_opt argument, rather this setting is now
provided by the global default_emit_opt variable.

Now, when -X emit=native is passed as a command-line option, the emitter
will be set for all compiled modules (included imports), not just the
top-level script.

In the future there could be a way to also set this variable from a script.

Fixes issue #4267.
2019-08-28 12:47:58 +10:00
Damien George 0f4d595beb examples/embedding: Fix hard-coded MP_QSTR_ value. 2018-09-14 13:33:08 +10:00
Dave Hylands 1a2c511e5d examples/embedding: Fix reference to freed memory, lexer src name.
This issue was brought up by BramPeters in the forum:
https://forum.micropython.org/viewtopic.php?p=30066
2018-09-14 13:27:43 +10:00
Damien George 31cf49c672 examples/embedding: Add code markup and fix typo in README.md. 2018-06-18 12:29:22 +10:00
Damien George 6b40a06057 examples/embedding: Don't prefix $(MPTOP) to ports/unix source files.
Otherwise the build process puts the corresponding output object files in
two directories lower, not in build/ports/unix.
2018-02-23 13:15:01 +11:00
talljosh c2f4f36010 examples/embedding: Update broken paths to use correct $(MPTOP).
Some ".." need to be changed to $(MPTOP), and in some places "ports/" needs
to be inserted to get to the "ports/unix/" subdir.
2018-02-22 14:50:45 +11:00
Damien George 24c513cbc3 unix/Makefile,embedding/Makefile: Remove obsolete use of STMHAL_SRC_C. 2018-02-14 15:24:21 +11:00
Damien George 4ec803a42a all: Make static dicts use mp_rom_map_elem_t type and MP_ROM_xxx macros. 2017-08-21 21:34:23 +10:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George 761e4c7ff6 all: Remove trailing spaces, per coding conventions. 2017-07-19 13:12:10 +10:00
Damien George 4d2778c9fb examples/embedding: Use core-provided KeyboardInterrupt object. 2017-06-07 20:28:18 +10:00
Ville Skyttä ca16c38210 various: Spelling fixes 2017-05-29 11:36:05 +03:00
Damien George 4c307bfba1 all: Move BYTES_PER_WORD definition from ports to py/mpconfig.h
It can still be overwritten by a port in mpconfigport.h but for almost
all cases one can use the provided default.
2017-04-01 11:39:38 +11:00
Damien George b6c7e4b143 all: Use full path name when including mp-readline/timeutils/netutils.
This follows the pattern of how all other headers are now included, and
makes it explicit where the header file comes from.  This patch also
removes -I options from Makefile's that specify the mp-readline/timeutils/
netutils directories, which are no longer needed.
2017-03-31 22:29:39 +11:00
Krzysztof Blazewicz 75589272ef all/Makefile: Remove -ansi from GCC flags, its ignored anyway.
The -ansi flag is used for C dialect selection and it is equivalent to -std=c90.
Because it goes right before -std=gnu99 it is ignored as for conflicting flags
GCC always uses the last one.
2017-03-23 15:32:12 +11:00
Damien George 21420b13c0 examples/embedding: Place lexer constructor within NLR handler block.
The lexer constructor may now raise an exception and it needs to be caught.
2017-03-14 11:52:05 +11:00
Paul Sokolovsky eb101a2701 examples/embedding/README: Convert to markdown, grammar and clarity fixes. 2017-02-15 13:27:24 +03:00
Damien George 6b239c271c py: Factor out persistent-code reader into separate files.
Implementations of persistent-code reader are provided for POSIX systems
and systems using FatFS.  Macros to use these are MICROPY_READER_POSIX and
MICROPY_READER_FATFS respectively.  If an alternative implementation is
needed then a port can define the function mp_reader_new_file.
2016-11-16 18:13:50 +11:00
Damien George 675d1c9c60 ports: Remove typedef of machine_ptr_t, it's no longer needed.
This type was used only for the typedef of mp_obj_t, which is now defined
by the object representation.  So we can now remove this unused typedef,
to simplify the mpconfigport.h file.
2016-08-15 11:02:59 +10:00
Paul Sokolovsky 4d4cfc2ee6 examples/embedding: Add README. 2016-07-22 22:13:03 +03:00
Paul Sokolovsky 1e77e25675 examples/embedding: Example for embedding MicroPython in an app. 2016-07-22 22:13:03 +03:00