djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,240 Commits 21 Branches 274 Tags 785 MiB
33496e9c68
Commit Graph

3207 Commits

Author SHA1 Message Date
Scott Shawcroft
801d9655e5
Merge pull request #2881 from DavePutz/Issue2872 
Added call to rtc_reset() to fix Issue #2872
 2020-05-11 15:30:32 -07:00
Lucian Copeland
94949fb46f Add recovery domain write access, adjust stack 2020-05-11 18:02:40 -04:00
Scott Shawcroft
61450cbd56
Add Teensy 4.1 board definition 2020-05-11 13:58:58 -07:00
Lucian Copeland
248704b262 Merge remote-tracking branch 'upstream/master' into stm32-lsetimeout 2020-05-11 14:18:37 -04:00
DavePutz
407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset() 
Added an #if CIRCUITPY_RTC check  for platforms supporting RTC
 2020-05-11 12:03:44 -05:00
DavePutz
2ddfab315c
Added call to rtc_reset() in rtc_init() 
Fix for issue #2872. The rtc_time_source had not been initialized; causing a time.time() call to fail.
 2020-05-11 11:31:18 -05:00
warriorofwire
eb3d5fa453 ujson: do not eat trailing whitespace 
Ujson should only worry about whitespace before JSON.  This becomes apparent when you are using MP stream protocol to read directly from input buffers.

When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout.

Fixes:
- Waiting for a timeout after you have completed reading a correct and complete JSON off the input.
- Raising an OSError after reading a correct and complete JSON off the input.
- Eating more data than semantically owned off the input buffer.
- Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object.

Code you would write before:
```
line = board_busio_uart_port.read_line()
json_dict = json.loads(line)
```
or reaching for fixed buffers and swapping them around in Python.

Code that did not work before that does now:
```
json_dict = json.load(board_busio_uart_port)
```

- This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs.
- It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA.
- It simplifies code that users write while improving their apps.
 2020-05-10 20:45:42 -07:00
warriorofwire
206d0e598a Add vectorio: for drawing shapes 
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
 2020-05-09 15:38:22 -07:00
Max Holliday
e6df8e0989 Merge branch 'master' into non-standard-nvm 2020-05-09 12:22:50 -07:00
Dan Halbert
8d00d99ca0
Shrink hallowing_m0_express to fit ko build 2020-05-08 22:51:21 -04:00
Lucian Copeland
5249a7b02c Add timeout and adjustment to LSI 2020-05-08 12:36:39 -04:00
Jeff Epler
182ae10080 Fix build after #2831 (stm32f4xx rgbmatrix) broke it 2020-05-07 18:32:50 -05:00
Scott Shawcroft
c3b3eb4c21
Merge pull request #2831 from jepler/rgbmatrix-stm 
stm: enable RGBMatrix
 2020-05-06 08:35:25 -07:00
Scott Shawcroft
4519ddebeb
Merge pull request #2841 from hierophect/mimxrt-spi-oneway 
mimxrt10xx: add one-directional SPI
 2020-05-06 08:32:21 -07:00
Daniel Pollard
7f1be814c8 changed build variables as per advice 2020-05-06 09:04:15 +10:00
Lucian Copeland
a1330747e8 text fixes, postpone warning disable 2020-05-05 12:46:30 -04:00
hierophect
c311b5c002
Merge pull request #2842 from hierophect/stm32-h7-displayio 
STM32: Add displayio to F7/H7
 2020-05-05 12:37:08 -04:00
Daniel Pollard
f63ee9fb9b excluded countio from other smaller boards 2020-05-05 16:15:57 +10:00
Daniel Pollard
d5c24b99b8 hallowing m0 - exclude countio 2020-05-05 16:04:28 +10:00
Daniel Pollard
bfa5cd9c13 refactor countio based on feedback 2020-05-05 15:23:38 +10:00
Dan Halbert
b7836aeac6 address review comments 2020-05-04 19:51:08 -04:00
Dan Halbert
bae7a5e433 make translate again 2020-05-04 17:26:59 -04:00
Dan Halbert
602eabe668
Squeeze hallowing_m0_express build slightly 
ko build is a little too big.
 2020-05-04 17:18:53 -04:00
Dan Halbert
c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Dan Halbert
d6c6f9f4f0 add PacketBuffer .incoming_ and .outgoing_packet_length 2020-05-04 15:59:45 -04:00
Dan Halbert
4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100 
nrf: add pca10100
 2020-05-04 10:51:01 -04:00
Sean Cross
b128399d1e nrf: simmel: enable CIRCUITPY_USB_HID 
Simmel had USB HID disabled in order to save space.  However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID.  This in turn caused HID to be included
in the USB Configuration Descriptor.

For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython.  However, in the most recent version this has rightfully
caused asserts to appear during configuration.

Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-04 15:37:53 +08:00
Sean Cross
cb4fc894d7 nrf: add pca10100 
This is the nRF52833-DK board.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-04 15:07:49 +08:00
Lucian Copeland
61b0994631 Fix flag typo 2020-05-01 14:46:06 -04:00
Lucian Copeland
bc581fbdfb Add-unidirectional-SPI 2020-05-01 13:15:38 -04:00
Yihui Xiong
7dd3ddc06b use Nordic's VID which seems to be allowed 
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
 2020-05-01 06:10:43 +00:00
Scott Shawcroft
a863b0a349
Fix openmv_h7 build 2020-04-30 13:46:12 -07:00
Scott Shawcroft
1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-30 13:25:31 -07:00
hierophect
10c5bf666e
Merge pull request #2836 from hierophect/stm32-openmv-pid 
STM32: Add correct PID for the OpenMV
 2020-04-30 16:07:34 -04:00
Lucian Copeland
06b62721b3 Increase H7 filesystem size 2020-04-30 15:49:17 -04:00
Scott Shawcroft
74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout 
Update teknikio bluebird pin assignments
 2020-04-30 11:50:02 -07:00
Lucian Copeland
435aa3d055 Add correct PID for the OpenMV 2020-04-30 14:49:47 -04:00
Lucian Copeland
4f71bd295d Make PulseIO optional within DisplayIO 2020-04-30 14:47:50 -04:00
Scott Shawcroft
f44e1d6a8d
Merge pull request #2828 from simmel-project/add-simmel 
WIP: add simmel board
 2020-04-30 11:40:34 -07:00
Lucian Copeland
89ff5589c4 Add the OpenMV-H7 R1 board 2020-04-30 12:39:20 -04:00
Jeff Epler
e5be728c1c stm: enable protomatter 
Testing performed: on stm32f405 feather, all pins change in plausible ways
on a logic probe.  Didn't actually drive a display yet.
 2020-04-30 08:58:58 -05:00
JoeBakalor
36a71560c2 update teknikio bluebird pin assignments 2020-04-30 09:58:27 -04:00
Yihui Xiong
4393a88fb6 add nRF52840 based Makerdiary Pitaya Go 2020-04-30 07:38:20 +00:00
Dan Halbert
241d7e2ae6 change many ifndefs to ?= 2020-04-29 23:31:34 -04:00
Dan Halbert
f3078511a6 further cleanup and bug fixing 2020-04-29 23:18:08 -04:00
Sean Cross
6aac9233db nrf: bluetooth: add s147 v7.0.1 softdevice hexfile 
This was not added as part of the initial v7.0.1 patchset because
.hex files are in this project's .gitignore, and so git ignored it.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-30 10:43:46 +08:00
Dan Halbert
180f5c6a94 Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes 2020-04-29 22:11:22 -04:00
Dan Halbert
3d62f87e29 back to '.packet_size' for compatiblity 2020-04-29 22:10:56 -04:00
Dan Halbert
84cee1ab8d rename and improve PacketBuffer packet length property 2020-04-29 17:49:31 -04:00
Scott Shawcroft
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power. 
Enable pixelbuf in its place because we'll need it soon.
 2020-04-29 13:57:09 -07:00
Scott Shawcroft
a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-29 10:51:21 -07:00
Sean Cross
1d0781bf12 nrf: add simmel board 
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-29 11:40:00 +08:00
Scott Shawcroft
2d7cf4b792
Merge pull request #2819 from hierophect/stm32-readme 
STM32: Add port readme, make flash
 2020-04-28 12:32:03 -07:00
Max Holliday
b2de5a9df9 fixing my goofy gcc-arm local stuff 2020-04-28 12:24:10 -07:00
Max Holliday
6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Max Holliday
baad9c11df Merge branch 'master' into non-standard-nvm_cleanup 2020-04-28 11:42:58 -07:00
TG-Techie
b9e494b85a add submodule to TG-Watch02A 2020-04-28 00:03:02 -04:00
Scott Shawcroft
b7804f450b
Fix stm32746g_discovery 
Also, rename it so that matches the other board names.
 2020-04-27 20:34:42 -07:00
Scott Shawcroft
e45de39998
Fix nucleo_f746zg build 2020-04-27 20:28:05 -07:00
TG-Techie
76b466a38a add submodule to TG-Watch02A 2020-04-27 22:49:30 -04:00
Lucian Copeland
2a0e176a77 Add readme and dfu-flashing 2020-04-27 20:51:47 -04:00
Scott Shawcroft
de42e4af02
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 17:43:32 -07:00
Scott Shawcroft
40a1f3edbc
Merge pull request #2811 from jepler/update-ulab 
ulab: actually update the submodule
 2020-04-27 17:41:43 -07:00
Scott Shawcroft
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Dan Halbert
faa50df05f
Merge pull request #2817 from jepler/stm-linker-scripts 
Standardize on FLASH_FIRMWARE section name in linker scripts
 2020-04-27 18:43:26 -04:00
Jeff Epler
7f0f0b30d3 linker scripts: Re-align at ":" 
With "git show -b" you can verify that this is a whitespace only change
because the diff will be empty.
 2020-04-27 17:17:42 -05:00
Max Holliday
86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Jeff Epler
7eff89e9f9 linker scripts: Re-align at ":" 
With "git show -b" you can verify that this is a whitespace only change
because the diff will be empty.
 2020-04-27 12:47:52 -05:00
hierophect
d9e4155815
Merge branch 'master' into stm32f7_os 2020-04-27 12:58:15 -04:00
Mark Olsson
31d8e46063 Enables os on STM32F7 
os.uname() works
os.urandom() doesn't work yet, will enable in another PR
 2020-04-27 18:18:43 +02:00
Mark Olsson
f9096d83ac Enables PulseIO on STM32F7 
Tested on nucleo_f746zg
 2020-04-27 17:55:07 +02:00
Jeff Epler
6f6dc835d2 litex: Use FLASH_FIRMWARE instead of FLASH in linker scripts 
for compatibility with the build_memory_info script
 2020-04-27 09:12:45 -05:00
Jeff Epler
808b456927 mimxrt10xx: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts 
for compatibility with the build_memory_info script

This change was scripted:
    git grep -l FLASH_TEXT | xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/
 2020-04-27 08:07:47 -05:00
Jeff Epler
aff42defda stm: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts 
for compatibility with the build_memory_info script

This change was scripted:
    git grep -l FLASH_TEXT | xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/
 2020-04-27 08:07:28 -05:00
Jeff Epler
485f667141 ulab: disable on espruino pico 
this non-"express" board is nearly full.  Right now it's actually possible
just to disable the "compare" module, but as this leaves it packed
pretty full I prefer to fully disable it in order to avoid the topic
returning again soon.
 2020-04-27 07:47:05 -05:00
Scott Shawcroft
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb 
Update tinyusb
 2020-04-26 20:55:36 -07:00
hierophect
652a5de242
Merge pull request #2809 from k0d/stm32f767xx_fix 
Adds missing declarations in periph.h for stm32f767xx
 2020-04-25 14:16:34 -04:00
Mark Olsson
8814dd038e Adds missing declarations in periph.h for stm32f767xx 2020-04-25 19:50:48 +02:00
Scott Shawcroft
67c053e9c4
Add USB include for LiteX 2020-04-24 17:24:05 -07:00
Scott Shawcroft
5c7f6e6211
Remove empty #if and add missing includes. 2020-04-24 11:48:55 -07:00
Mark Olsson
91fbbcab19 adds support for the stm32f746g_disco board 2020-04-24 16:43:39 +02:00
Dan Halbert
5a22a5d016
Merge pull request #2598 from hierophect/stm32-docfix 
Add stm to docs matrix
 2020-04-24 10:07:15 -04:00
Dan Halbert
982a755eae
Merge pull request #2801 from simmel-project/nrf-s140-7.0.1 
Add NRF S140 7.0.1
 2020-04-23 21:59:51 -04:00
Lucian Copeland
bd0df9e3bc Minor redundancy fix 2020-04-23 17:43:35 -04:00
Lucian Copeland
c6c77726e7 Merge remote-tracking branch 'upstream/master' into stm32-docfix 2020-04-23 13:39:48 -04:00
Lucian Copeland
8791ca6af3 implement requested changes 2020-04-23 13:33:41 -04:00
hierophect
ead7c6c887
Merge pull request #2785 from k0d/ports_nucleo_f746zg 
STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board
 2020-04-23 12:32:44 -04:00
Mark Olsson
83cc9783cc STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board 2020-04-23 10:48:27 +02:00
Scott Shawcroft
f13de32208
Add HSE_VALUE for STM feather. 2020-04-22 14:37:24 -07:00
Lucian Copeland
d0a2106547 Remove old build flags, add fixes for shared_matrix 2020-04-22 16:06:08 -04:00
Scott Shawcroft
b277944cf0
Fix STM so it matches the correct RTC fields. 2020-04-22 11:10:51 -07:00
Sean Cross
689dd61379 nrf: nrf52833: use s140 v7.0.1 
Previously, we were using v6.1.1 which worked, but was unsupported.
v7.0.1 is the first version of s140 that supports the nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-22 13:34:11 +08:00
Sean Cross
09bef7b0e1 nrf: bluetooth: add s140 v7.0.1 
This is the first version with official support for nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-22 13:33:39 +08:00
Dan Halbert
2f86e31501 fix calculation of nrf firmware size 2020-04-22 00:52:54 -04:00
Dan Halbert
fbc8719fad ringbuf tested 2020-04-21 22:40:12 -04:00
Dan Halbert
77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert
38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Scott Shawcroft
dcb0e50f04
Fix USB midi and hid disable. 2020-04-21 14:15:44 -07:00
Scott Shawcroft
5cc8a3ec82
Add back fake us delay. 2020-04-21 14:14:49 -07:00
Scott Shawcroft
17d038830d
Use our own flag for board crystal config. 2020-04-21 14:14:30 -07:00
Sean Cross
c04e6d6f52 nrf: bleio: parameterize softradio configuration 
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations.  If a
parameter is unspecified then the previously-defined value is used.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:59 +08:00
Sean Cross
3537ad4059 nrf: mpconfigport: support configuration of various sizes 
Conditionally set variables such as the softdevice RAM size, bootloader
size, and the spi m3 buffer size.  This allows ports to adjust these
values to suit their needs.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:58 +08:00
Sean Cross
33720af0c6 nrf: mpconfigport: subtract config size from firmware size 
The BLE Config area needs to be subtracted from the size of the firmware.
THis is because the firmware is counted by walking backwards from the end
of memory, and the BLE config area is placed lower in memory than the
firmware.  Subtracting the BLE config size ensures the internal flash
filesystem doesn't try to use the firmware as storage.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:57 +08:00
Sean Cross
3ed5b87b8f nrf: add support for nrf52833 
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:56 +08:00
Sean Cross
4ad1cbeea3 nrf: make rgbmatrix and framebufferio optional 
Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0
in their .mk file in order to prevent these from being built.  This
is necessary for resource-constrained devices.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 10:44:21 +08:00
Sean Cross
066f486b28 nrf: supervisor: support building without BUSIO 
Only initialize i2c, spi, and uart if building with BUSIO.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 10:44:20 +08:00
Sean Cross
ac9d336f40 nrf: make neopixel support optional 
Add a conditional around the call to neopixel_write(), allowing us
to build for nrf without neopixel support.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 09:56:27 +08:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power 
This isn't perfect and needs a bit more testing.
 2020-04-20 18:25:13 -07:00
Scott Shawcroft
a4d86b96fd
Merge pull request #2777 from pewpew-game/master 
Fix RGB/BGR colors in Stage
 2020-04-20 15:25:29 -07:00
Mark Olsson
506f340c7d STM32: f767: Fixes linker settings. 2020-04-20 19:15:18 +02:00
Jeff Epler
5fcc6d6286 RGBMatrix: finish renaming from Protomatter 
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
 2020-04-17 18:44:07 -05:00
Jeff Epler
3d6258f63d Rename Protomatter -> RGBMatrix 
This is a quick rename, it changes the user-facing names but not the
internal names of things.
 2020-04-17 18:43:57 -05:00
Jeff Epler
a32337718d Rename _protomatter -> protomatter 
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
 2020-04-17 18:43:57 -05:00
Scott Shawcroft
7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
hierophect
1a71c8c515
Merge pull request #2735 from hierophect/stm32x7-setup 
STM32: Add F7 and H7 Support
 2020-04-17 13:02:09 -04:00
Radomir Dopieralski
43022d8294 Add copyrights to pewpew m4 and ugame board.c 2020-04-17 09:50:11 +02:00
Lucian Copeland
9e49fc13f4 startup file crash fix, H7 bin fix 2020-04-16 17:33:48 -04:00
Scott Shawcroft
5b0d9bdeb0
Update copyright to bump the CI 2020-04-16 14:21:26 -07:00
Scott Shawcroft
b3552efc76
Remove accidental file 2020-04-16 11:28:01 -07:00
Sean Cross
61f777c9c6 litex: enable binascii and ujson modules 
Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 10:02:08 +08:00
Sean Cross
bb527ac9ea litex: disable minimal build 
Manually specify available modules and disable any modules
that are currently unsupported on the litex target.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 09:26:08 +08:00
Sean Cross
db3933429a litex: add os module 
Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 09:26:08 +08:00
Sean Cross
6885ffc9af litex: mphalport: add fake mp_hal_delay_us 
Add a mp_hal_delay_us, which is required by some of the modules,
that simply calls mp_hal_delay_ms / 1000.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 09:26:08 +08:00
Radomir Dopieralski
f39ca6052e Fix RGB/BGR colors in Stage 
This makes the colors used by the stage library compatible with those
used by the displayio library.
 2020-04-15 23:41:38 +02:00
Lucian Copeland
00b2e6a1db Fix korea translation error, minor submodule change 2020-04-15 13:11:14 -04:00
Lucian Copeland
54abfc2e8b translations-merge 2020-04-15 10:29:05 -04:00
Lucian Copeland
6427994b14 Implement requested changes 2020-04-15 10:22:51 -04:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Scott Shawcroft
7dfcae6067
Tweaks from jepler 2020-04-14 17:09:48 -07:00
Jeff Epler
23bced26da samd: actually disable protomatter timer 
Just setting the timer handler to NO_INTERRUPT doesn't stop the
interrupt from occurring.
 2020-04-14 18:24:58 -05:00
Jeff Epler
759fdffda5 Update ports/atmel-samd/boards/pyportal_titano/board.c 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-04-14 18:24:58 -05:00
Jeff Epler
1d8a073c05 nrf: protomatter port 2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Jeff Epler
a51d4f7a45 pycubed: add trailing newline to file 
POSIX specifies that text files end in a trailing newline
 2020-04-14 18:24:54 -05:00
Jeff Epler
db01f88cc3 enable MICROPY_PY_REVERSE_SPECIAL_METHODS where ulab is enabled 2020-04-13 19:58:52 -05:00
Lucian Copeland
83a55f65a4 Implement cache-based reads 2020-04-13 15:14:38 -04:00
Lucian Copeland
426d2afe28 Fix pin mapping for the H7 Nucleo 2020-04-13 14:36:49 -04:00
Lucian Copeland
6227e63cc5 Merge remote-tracking branch 'upstream/master' into stm32x7-setup 2020-04-13 12:03:56 -04:00
Lucian Copeland
5ac38c95cc Various requested fixes 2020-04-13 12:03:05 -04:00
Sabas
cac4fb0318
Merge branch 'master' into nfc_copy 2020-04-09 17:05:11 -05:00
sabas1080
49771b4d7f Update to v1.3 2020-04-09 14:27:51 -05:00
Lucian Copeland
92a0621e59 Add busio support, cleanup 2020-04-09 13:43:19 -04:00
Scott Shawcroft
01941c027b
Fix up STM 
Enable the Alarm IRQ earlier and correct bit clearing.
 2020-04-08 14:41:57 -07:00
Scott Shawcroft
d0a25ca9ac
Tweaks based on dhalberts feedback 2020-04-08 10:49:46 -07:00
Max Holliday
181ecf4a9b fixing my goofy CROSS_COMPILE fix 2020-04-07 21:54:46 -07:00
Max Holliday
a53a26be70 missed a debug flag 2020-04-07 18:24:53 -07:00
Max Holliday
826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft
6544bf52fb
Enable SNVS interrupt 
The iMX RT has a separate wake up controller, the GPC, that replaces
the NVIC when asleep. It adds the ability to only wake up on certain
interrupts. It seems that it requires at least one enabled interrupt
in the NVIC to turn on it's wake up circuitry. It doesn't need to
be the same interrupt as the wake up signal. For example, the RTC
in the SNVS can wake us up if a USB interrupt is enabled. Before
then it won't work. So, we enable the SNVS interrupt on start up
so it can wake us up.
 2020-04-07 17:15:18 -07:00
Scott Shawcroft
aae0ce6bad
Fix autoreload and ticks on IMX RT 2020-04-07 14:16:07 -07:00
Scott Shawcroft
a8dfba235c
Fix alarm so that it is correctly set. 2020-04-07 13:07:29 -07:00
Scott Shawcroft
c0ba2a839f
Updates based on feedback from jepler 2020-04-06 16:03:31 -07:00
arturo182
08f369ea96 mimxrt1011: Only re-init SPI when it's actually needed 
If some crazy code (*cough* FourWire) decides to reconfigure the bus
before every transfer, it might get a bit slow...
 2020-04-06 22:10:12 +02:00
Scott Shawcroft
e99cf6e441
Rework sleep timing 
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
 2020-04-03 18:07:56 -07:00
Scott Shawcroft
7e69d30c02
Fix nRF PulseIn 2020-04-03 14:22:56 -07:00
Lucian Copeland
9761672d42 Linker file restructure, TCM and MPU additions 2020-04-03 16:33:18 -04:00
Scott Shawcroft
46af4bdd0e
Fix SAMD21 PulseIn 2020-04-02 17:35:52 -07:00
Lucian Copeland
47a5d83267 Implement F7 Nucleo 2020-04-02 11:47:16 -04:00
Sean Cross
9845a064ad ports: fomu: move more functions into ram for stability 
The SPI flash on current Fomu firmware is slow.  Circuitpython runs
XIP from SPI flash, and so execution time can also be slow.  Ordinarily
this isn't a problem, however certain operations are time-sensitive.

In particular, USB function needs to be handled quickly in order to
prevent the host from re-enumerating the device.

Place several critical TinyUSB structures into RAM, as well as several
hot functions that are frequently called.  This reduces execution time
at the expense of system memory, and greatly improves system stability.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-02 11:21:22 +08:00
Lucian Copeland
2f764ded63 merge and docs 2020-04-01 13:52:53 -04:00
Lucian Copeland
a89928c13c Implement requested changes 2020-04-01 13:02:05 -04:00
Scott Shawcroft
77562a2acd
Update the supported ports 2020-03-31 18:27:55 -07:00
Scott Shawcroft
75b7f583d2
Update LiteX APIs for new tick 2020-03-31 17:52:23 -07:00
Scott Shawcroft
1071924701
Fix thunderpack build 2020-03-31 17:05:37 -07:00
Scott Shawcroft
317b96e93a
Fix iMX builds 2020-03-31 17:00:30 -07:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Scott Shawcroft
4b063aeb29
Hack up STM32 PulseIn so it builds 2020-03-31 15:12:11 -07:00
Scott Shawcroft
f47b964c5f
Merge pull request #2726 from xobs/fomu-circuitpython 
ports: litex: add port and fomu board
 2020-03-31 13:51:09 -07:00
Scott Shawcroft
cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server 
Fix PacketBuffer server support
 2020-03-31 13:39:34 -07:00
Sean Cross
c69f7f8657 ports: litex: use dfu.py instead of dfu-suffix.py 
dfu.py now generates proper dfu suffixes without the nonstandard prefix.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 13:04:59 +08:00
Sean Cross
34ea140783 ports: fomu: build dfu as part of Makefile 
Now that we have a replacement for `dfu-suffix`, construct a dfu
image rather than a UF2 image.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 11:42:55 +08:00
Sean Cross
065441e58c ports: litex: enable itcm region for fomu 
This adds a new command line flag -DFOMU to indicate we're building
for a Fomu board.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 09:40:38 +08:00
Sean Cross
786e79ebc9 ports: litex: add port and fomu board 
This adds support for Litex, along with support for the Fomu FPGA board.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 09:40:38 +08:00
Scott Shawcroft
e8cffcf978
Merge pull request #2740 from arturo182/mimxrt10xx_neopixel 
mimxrt10xx: Fix neopixel_write
 2020-03-30 17:49:14 -07:00
arturo182
13022be299 mimxrt10xx: Fix neopixel_write 2020-03-31 01:05:03 +02:00
Brian Dean
7cfa8e1a68 board_vina_m0:pins.c: PGM_LED is on PA28 not PA15. 2020-03-29 18:59:00 -04:00
Lucian Copeland
e2be069686 Support cached internal flash on the H743 2020-03-28 18:30:46 -04:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity 
Add polarity and phase to FourWire.
 2020-03-28 07:28:37 -05:00
Scott Shawcroft
a4a458943d
Correct MIMXRT sdk version 2020-03-27 15:40:17 -07:00
Scott Shawcroft
798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft
e4c4a4a3de
Swap to committed dependencies 2020-03-27 14:39:59 -07:00
Scott Shawcroft
b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
Lucian Copeland
7995bcac40 Flash additions 2020-03-27 14:15:33 -04:00
Brian Dean
7fa38e8725 Update board name to bdmicro_vina_m0 to eliminate hyphens. 2020-03-27 13:37:59 -04:00
Brian Dean
14a1e5756e Merge branch 'master' of https://github.com/adafruit/circuitpython 2020-03-26 20:28:54 -04:00
Brian Dean
2ae9edcbff Add new board BDMICRO 'Vina M0'. 
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c

This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.

Has been extensively tested with CircuitPython and works well.
 2020-03-26 20:15:54 -04:00
Lucian Copeland
348df4be2b Merge remote-tracking branch 'upstream/master' into stm32x7-setup 2020-03-26 18:16:11 -04:00
Lucian Copeland
c4db8b87e2 Add F7 and H7 Support to the STM32 port 
Restructures the STM port of Circuitpython to be more generic about the STM32 chip lines to support
the F7 and H7 series of chips. Adds the new Packages directory to organize different chip layouts
between lines. Makes general changes to the Makefile to condense board-level flags to the minimum
and support the new chip series. Adds the new chip line to the Peripherals directory, along with
new python tools used to generate peripheral text automatically in the tools/ directory.
 2020-03-26 18:01:17 -04:00
Scott Shawcroft
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight 
Add backlight polarity flag to Display
 2020-03-26 14:00:47 -07:00
Scott Shawcroft
3959548054
Merge pull request #2734 from theacodes/add-flash-for-sol 
Add GD25Q64C as a flash chip for Sol
 2020-03-26 13:27:56 -07:00
Thea Flowers
ff67571e9a Add GD25Q64C as a flash chip for Sol 2020-03-26 12:33:27 -07:00
siddacious
9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
siddacious
7bba79363a allowing backlight change 2020-03-25 22:41:23 -07:00
Scott Shawcroft
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling 2020-03-25 17:41:47 -07:00
arturo182
18c12e7822 mimxrt10xx: Return proper UART read length when everything was read 2020-03-26 00:15:48 +01:00
Scott Shawcroft
3551b769a2
Fix connection handle tracking in PacketBuffer when a server. 2020-03-25 13:31:18 -07:00
Scott Shawcroft
59eb35da30
Merge pull request #2727 from burtyb/commander-1 
Add support for Commander
 2020-03-25 11:00:11 -07:00
Scott Shawcroft
ea0ce39962
Simplify STM a bit. 2020-03-24 15:49:24 -07:00
Scott Shawcroft
5e1e4d32db
Get basic sleep going on the iMX RT 1011 2020-03-24 15:46:10 -07:00
Chris Burton
5e559be9b5 Remove Adafruit_CircuitPython_CircuitPlayground 2020-03-24 21:10:34 +00:00
Scott Shawcroft
f414f2b588
Merge pull request #2723 from jgillick/jgillick/circuitpython/stm32f411 
Add new STM board: Thunderpack
 2020-03-24 12:27:20 -07:00